Interlogix TX-6010-01-1 Specsheet
GE
FireworX Fire & Life Safety
Security
Overview
The TX-6010-01-1 supervised photoelectric smoke alarms are
self-diagnostic Learn Mode wireless sensors with a 319.5MHz
transmitter, built-in sounder, low battery annunciation, diagnostic/
status LED, and integrated fixed temperature and rate-of-rise heat
sensors. Each unit will communicate an alarm and trouble condition
to a GE compatible control panel. In addition, the mounting tamper
will send a trouble condition as necessary.
The TX Series photoelectric smoke alarms continually monitor
operational status and provide a visual trouble condition if they drift
out of the sensitivity range or fail internal diagnostics.
The series meets NFPA 72 field sensitivity testing requirements
without the need for external meters. The alarm sensitivity level can
be determined at the unit.
Another feature is built-in drift compensation that allows the alarm
to adjust sensitivity automatically as it becomes dirty over time. The
drift compensation feature dramatically increases the time between
cleaning, as well as reducing the chance of a nuisance alarm.
A low battery pre-alarm feature sends a signal to the alarm company control station long before the smoke alarm begins its low
battery chirp. This ensures a pro-active response to replace the battery in a timely manner and without the disturbance caused by an
alarm beeping continuously when it nears the end of its life.
Conventional Initiating Devices
Standard Features
•
Long life 3V lithium battery operated
Learn Mode for easy programming
•
Reliable 319.5MHz crystal transmitter
•
Low battery pre-alarm sent to control station
•
Field replaceable optical chamber
•
Automatic drift compensation
•
Integral heat detection
•
Built-in 85dB temporal sounder
•
Hush feature
•
Low battery pre-alarm sent to control station
•
Supervised Wireless
Smoke Alarms
TX-6010-01-1
Not to be used for installation purposes. Page 1 of 2
Data Sheet FX85001-0601 Issue 1
GE
Security
U.S.
T 888-GESECURity
F 503-691-7566
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852 2907 8108
F 852 2142 5063
Latin America
T 305 593 4301
F 305 593 4300
www.gesecurity.com/fireworx
© 2009 General Electric Company
All Rights Reserved
Specifications
Electrical
Voltage 3 VDC
Average standby current 35 µA, typical
Test current 2 mA, typical
Alarm current 70 mA, typical
Battery type (Note 1) 3V lithium–Duracell® 123, Sanyo® and Panasonic® CR123A
Low battery threshold 2.7 V causes low battery signal
Features
Sounder 85dB at 10 ft., temporal pattern
Low battery beep rate 1 every 45 ±2 seconds
Sensitivity 2.3% ± 0.890%
Environmental
Operating temperature 40 to 100°F (4 to 38°C)
Operating humidity range 0 to 95% noncondensing
RF immunity 20V/minute minimum; 1 to 1000 MHz
Drift compensation adjustment 0.5%/ft. maximum
Rate of rise 15°F/minute > 105°F (8.3°C/minute > 40.6°C)
Fixed 135°F ± 5°F (57.2°C ± 2.8°C)
RF frequency 319.5 MHz
Transmitter ID Preprogrammed, 1 million codes
Modulation type AM
Signal format Pulse-width modulation
Output types Alarm, restore, tamper, low battery, trouble, 1 hour Supervisory
Physical
Color White
Alarm dimensions 5.6 x 2.4 in. (142 x 61 mm)
Base dimensions 5.4 x 0.46 in. (137 x 12 mm)
Regulatory
Listings FCC, CSFM
Note 1:
These batteries are the ONLY brands that have been tested and approved for use with the 560/570 series.
Ordering Information
TX-6010-01-1 Supervised residential wireless smoke detector for use with all compatible
TX-6010-01-1-10PKG Same as above - Package of 10 smoke alarms
Accessories
SM-200-12PKG Smoke! in a Can® (aerosol spray) for functional testing of smoke detectors,
SM-EXT1 Smoke! in a Can extension tube
211 -10PKG Replacement optical chambers, pack of 10
401 Test magnet in a plastic shell for pole mounting
imagination at work
GE Security panels, 85dBa sounder, fixed/rate-of-rise alarm, transmitter,
2-Lithium batteries, UL 319.5
pack of 12
Data Sheet FX85001-0601 Issue 1
Not to be used for installation purposes. Page 2 of 2
Loading...