Intrusion
DesignLine Slim
Door/Window
Sensors
Small, wireless design for the
highest level of intrusion protection
OVERVIEW
Using the DesignLine Door/Window Sensor, alarm systems
can be easily installed and provide the highest level of intrusion
protection available for a home or business. These sensors
monitor doors, windows, cabinets or anything that opens
and closes.
Almost any building can be set up with an Interlogix system
because of the DesignLine Door/Window Sensor’s small
size and fl exible mounting confi gurations.
The DesignLine Door/Window Sensor provides years of troublefree operation because advanced circuit technology makes this
sensor extremely effi cient and reliable. The low current draw,
coupled with a high-capacity lithium battery, means fi ve to eight
years between battery changes when sensors are used on
low-traffi c openings.
The wire-free nature of DesignLine Door/Window Sensors
means: less installation cost; less installation damage from
drilling holes and pulling wires; less time spent on premises
for the installer; and less compromise to security due to the
infl exibility of sensor location when using hardwire sensors.
STANDARD FEATURES
• Low-profi le design gives sleek modern look; fi ts in any
home or business
• Wireless technology is easier and less costly to install;
safer because of fl exible placement
• Advanced circuit technology supplies robust function with
low current draw
• Compatible with all Interlogix 319.5 MHz control panels
and receivers
• Functions at open-air distances of up to 500 ft.
• Runs on lithium coin cell battery with typical life of 5 years
• Tamper-resistant case inhibits tampering and improves
security and durability
• External contact header allows connection of an external
hardwire contact
interlogix.com
DesignLine Slim
Door/Window Sensors
Small, wireless design for the
highest level of intrusion protection
North America
T 855-286-8889
Latin America
T 561-998-6114
Specifi cations
Battery Panasonic CR2032, 3VDC, 225mAh,
Lithium Coin Cell
Battery life 5 years (typical)
Transmitter frequency 319.508MHz (crystal-controlled)
Transmitter frequency tolerance +/- 8 kHz
Bandwidth 24 kHz
Modulation type Amplitude Shift Key (ASK)
Unique ID codes 16 million
Peak fi eld strength Typical 30,000 uV/m @ 3m
External input sampling current 20 uA
Magnetic sensitivity of reed switch 10 to 20 amp turns
Reed sensitivity .38-in. (.97-cm) gap
Magnet type Nd-Fe-B, N45
Sensor dimensions (WxHxD) 1 x 2.44 x 0.35 in. (25.4 x 61.98 x 8.89mm)
Supervisory interval 64 minutes
Operating temperature 10°F~120°F (-12°C~49°C)
Enclosure PC-540
Weight 0.55 oz (15g)
Magnet dimensions (WxHxD) 0.43 x 1.3 x 0.31 in. (10.92 x 33.02 x 7.87mm)
Ordering Information
TX-1010-01-1 DesignLine Slim Door/Window Sensor, White
TX-1010-01-3 DesignLine Slim Door/Window Sensor, Brown
Dimensional Diagram
1 in.
(25.4 mm)
(61.98 mm)
2.44 in.
.43 in.
(10.92 mm)
(33.02 mm)
1.30 in.
.35 in.
(8.89 mm)
.31 in.
(7.87 mm)
(61.98 mm)
2.44 in.
(33.02 mm)
1.30 in.
interlogix.com
Specifi cations subject to change without notice.
© 2014 United Technologies Corporation.
Interlogix is part of UTC Building & Industrial Systems,
a unit of United Technologies Corporation.
305-3672 2014/03 (75579)
All rights reserved.