Interlogix TVW-AWB-1, TVW-AWB-2, TVW-DVM User Manual

TruVision

Wedge

Dome Back Box an
Dual View Mount
Installation Guide

P/N 1073093A-EN • REV A • ISS 30SEP15

d

Copyright

© 2015 United Technologies Corporation,

Interlogix is part of UTC Building & Industrial Systems, a unit of United
Technologies Corporation. All right s reserved.

Trademarks and patent s

Trade names used in this document m ay be trademarks or registered trademarks

of the manufacturers or vendors of the respectiv e products.

Contact information

For contact information, see www.interl ogix.com or
www.utcfssecurityproducts.eu.

Content

Product overview 3

Product and package contents 4

TVW-DVM dual view mount 4
TVW-AW B-1 outdoor angled back box 6
TVW-AW B-2 indoor angled back box 8
TVW-2G-AD adapter plate 9

Installation 12

Specifications 23

TruVision wedge camera bracket and mount 23

Product overview

This is the installation guide for the following TruVision wedge
camera models:

 TVW-DVM (dual view mount) (use with TVD-PPB)

 TVW-AW B-1 (angled back box for outdoor appli cation)

 TVW-AW B-2 (angled back box for indoor application)

 TVW-2G-AD (Adapter plate for wedge camera with 2-gang

box)

Installation Guide 3

Product and package contents

Check the package and contents for visible damage. If any

components are damaged or missing, do not attempt to use the

unit; contact the supplier immediately. If the unit is returned, it
must be shipped back in its original packaging.

TVW-DVM dual view mount

The TVW -DVM dual view mount (purchased separately) allows
you to install two panoramic cameras on a single mount. You
then obtain a view of the surrounding area without requiring a
complex integration effort when connecting to your storage
device or video management system (VMS).

Camera mount:

Tube adapter (30 x 12 mm): Conduit cover/plug:

4 Installation Guide

Template A:

Template B:

Screw 3 x 10 m (5 pcs m):

Screw (10 pcs):

Drywall anchor 7.5 x

24.5 mm

M4 screw 4 x 25 mm

Screw 3 x 8 mm (2 pcs):

Screw 4 x 10 mm (5 pcs):

Rubber ring:

Installation Guide 5

Figure 1: Cameras attached using the dual view mount

TVW-AWB-1 outdoor angled back box

The TVW -AWB-1 outdoor angled back box (purchased
separately) is weather resistant and includes a G1 threaded
conduit access and plug. It conceals the interconnect cables
and eliminates the blind area below the camera when the

camera is installed on a wall.

Camera back box:

6 Installation Guide

Tube adapter (30 x 12 mm):

Conduit cover/plug:

Template A:

Rubber ring:

Screw (5 pcs):

Screw 3 x 10 mm (5 pcs):

Drywall anchor 7.5 x 24.5 mm

M4 screw 4 x 25mm

Screw 3 x 8 mm (2 pcs):

Screw 4 x 10 mm (3 pcs):

Installation Guide 7

Figure 2: Camera mounted on an outdoor back box

TVW-AWB-2 indoor angled back box

The TVW -AWB-2 indoor angled back box (purchased
separately) conceals the interconnected cables and eliminates
the blind area below the camera when the camera is installed

on a wall.

Camera back box:

8 Installation Guide

Template B:

Screw 5 pcs:

Drywall anchor (7.5 x

24.5 mm)

M4 screw (4 x 25 mm)

Screw 3 pcs (4 x 10 mm):

Figure 3: Camera mounted on an indoor back box

TVW-2G-AD adapter plate

The TVW -2G-AD adapter plate (purchased separately) allows
you to attach the panoramic wedge camera to a standard 4-inch
2 gang box.

Installation Guide 9