Interlogix TVD-VFM2 Installation Instructions

TruVision TVD-VFM2 Dome Flush Mount

D

in.)

168mm

(6.61in.)

219.7mm(8.65in.)

65

.7mm

(2.

59in.)

Weight

Supported
cameras

Bolt, clamp
clip

Screw A

T

Bracket Installation Instructions

Description

Figure 1: Physical description

imensions: 219.7× 65.7 mm (8.65 × 2.59

: 700 g (0.66 lb.)

:

TVD-5604, TVD-5605
TVD-5606

and

Bolt: 2 pcs

Clamp: 2 pcs

emplate

Installation

Screws PM4×13 mm (4 pcs)

(used to attach the camera to the
flush mount bracket)

Note: The Dome Flush Mount Bracket is
designed to be used when installing a dome
camera in to a solid surface. It is not
recommended to be used with drop down tile
ceilings. Those tile ceilings are designed to
have the ceiling tiles drop onto a metal
framework. They are not structurally designed
to accommodate the installation of external
components.

To attach the clamps to the flush mount
bracket:

Note: The bracket comes with two bolts and

clamps pre-installed. However, it is strongly

Clip: 2 pcs

recommended to use the other two bolts and
clamps shipped with the bracket to ensure a

P/N 1073648-EN • REV A • ISS 04JUN19 1 / 3

more secure installation to the mounting
surface.

1. Align the hole of the clamp between the
two holes of the bracket leg.

2. Insert the bolt through the clamp and the
holes in the flush mount frame.

To attach the dome camera to the flush
mount bracket:

1. Using the template, cut a hole for the
flush mount in the mounting surface.

2. Attach the adapter plate to the flush
mount using screw A.

3. Attach the back box to the adapter plate

3. Use the enclosed clip to fasten the bolt
securely to the flush mount.

4. Attach the dome camera to the back box

and reinstall the bubble assembly to the
dome.

2 / 3 P/N 1073648-EN • REV A • ISS 04JUN19

5. Install the trim ring to the flush mount.