Interlogix TVD-SNB-BB User Manual

TVD-SNB-BB Back Box Installation Instructions

Description

Weight: 485 g

Dimensions: 182 x 99.5 x 42 mm

Figure 1: Dimensions of the back box

• G 3/4 (one pre-installed on the back box, two in the
package box)

(mm)

Installation

Figure 2: Top view

Accessories

The back box is shipped with:

• Expansion screws (4 pieces)

1. Mount the back box to the wall with the four expansion
screws supplied.

A.

B.

2. Install the swan neck bracket to the back box using the
four M6 screws supplied.

截面

(mm)

• M6 screws (4 pieces with lock washers)

(mm)

. P/N 1072180B • REV 1.0 • ISS 26SEP14

Regulatory information

Manufacturer Interlogix.

2955 Red Hill Avenue, Costa Mesa, CA 92626
5923, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

Copyright © 2014 United Technologies Corporation.

Trademarks and
patents

Interlogix is part of UTC Building & Industrial
Systems, a unit of United Technologies
Corporation. All rights reserved.

Trade names used in this document may be
trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.

N4131

Contact information

For contact information, see www.interlogix.com or
www.utcfssecurityproducts.eu.

2 / 2 P/N 1072180B • REV 1.0 • ISS 26SEP14