Interlogix S7754DAR-RST2, S7754DAT-RFC2, S7754DAR-RFC2 Specsheet
GE
Fiber Optic
Security
Overview
The S754DA and S7754DA fiber links provide two-way
transmission of two audio channels, two multiprotocol
data channels, and contact closure channels over
one or two single mode or multimode fibers.
Digital Processing
Digital processing of the audio signal along with an audio signalto-noise ratio >90 dB allows the audio output to drive balanced
or unbalanced loads and maintain constant audio levels.
Data Translation
The data functions include the unique data translation feature,
which allows one data format to be input and a different data
format to be output. Data formats are selected during installation
and can be easily changed in the field via rotary switch.
Audio and Data with
Contact Closure
Standard Features
• Two-way transmission of two audio, data and contact closure
channels over one or two single mode or multimode fibers
• 24-bit audio processing
• Unique data translation function
• Local or remote user-selectable data
format, 2 independent data channels
• Supports multiprotocol data formats
• Relay/contact closure - 2 duplex channel
• Built-in audio test generator
• Diagnostic LEDs
Superior Diagnostics
The SMARTS™ diagnostic technology provides an extensive
set of diagnostic tools including an audio test generator
to verify audio channel operation. LEDs provide a visual
indication of the operating status of the audio, data, and
contact channels as well as the optical signal strength.
Two-Way,
2-Channel Audio,
Multiprotocol
Data and
Contact Closure
S754DA and S7754DA
GE
GE
Security
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
2 Audio In/Out
2 Data
In/Out
2 Contact
In/Out
Transmitter
Optical Fiber
Receiver
2 Audio In/Out
2 Data
In/Out
2 Contact
In/Out
Specifications
Audio S754DA (Multimode) S7754DA (Single Mode)
Channels 2 duplex
Input Signal 17.4 V pk - pk, +18 dBu max.
Input Impedance
Output Signal Level
Output Impedance
Bandwidth
Audio Sampling Rate
Signal-to-Noise Ratio
Total Harmonic Distortion
Data
Channels 2 duplex, format independent
Formats RS-232 (3-wire/5-wire), TTL, RS-422, RS-485 (2-wire/4-wire),
Baud Rate
Bit Error Rate
Relay/Contact Closure
Relay Contact Rating 1 A at 30 VDC
Optical
Mode Multimode Single Mode
Optical Budget* 13 dB 18 dB
Emitter
Operating Distance**
Wavelength
Gain Control
Electrical
Input Power 13.5 VDC regulated
Current Requirement 500 mA
Power Consumption 6.75 W
Power Factor 4
Protection Solid-state short circuit protection
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions, Rack Units 1 slot (1.0”)
Weight Standalone 0.7 lbs (0.32 kg)
Construction Aluminum
30 ohms unbalanced or 60 ohms balanced
250 kbps to 512 kbps (depending on data format)
11 mi (18 km) 37 mi (60 km)
850 nm and/or 1300 nm 1310 nm and/or 1550 nm
600 ohms or 100k ohms
17.4 V pk - pk, +18 dBu max.
20 Hz to 20 kHz
52 kHz
>90 dB
<0.006%
Manchester, Biphase, SensorNet
<1.0E-9
2 duplex channels
Laser
(depending on model)
(depending on model)
Optical Automatic Gain Control (OAGC)
Ordering Information
Use the Configurator below to select the options available for this product.
- RST
Product Type
T Transmitter
R Receiver
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S754DA-2006-09-2
No. of Fibers
1 1 Fiber
2 2 Fibers
imagination at work
imagination at work
Optical Wavelength
Add L here only if ordering
High Order Wavelength
(2 Fiber units)
S7754DA
Receiver
Product Type Connector Type
T Transmitter FC FC Type
R Receiver ST ST Type
- R
No. of Fibers
1 1 Fiber
2 2 Fibers
Optical Wavelength
Add L here only if ordering
High Order Wavelength
(2 Fiber units)
Loading...