Interlogix S702VR-EST Specsheet
GE
Fiber Optic
Security
Overview
The S702V video link meets the challenge for a cost-effective, high
performance fiber optic video transmission system. The series
transmits two channels of baseband composite video up to 3.2
miles (5.2 km) over two multimode fibers.
Rack or Standalone Models
The S702V series consists of a transmitter and a receiver. The S702V
is available as a standalone unit and as a rack cards for use in the
515R1/517R1 rack mount card cages.
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals.
Video Transmitters and Receivers
Standard Features
One-way video transmission over two multimode fibers
•
Two video channels
•
Supports NTSC and PAL video formats
•
Works with all cameras
•
Video SNR >50 dB
•
8 MHz video bandwidth
•
Optical AGC
•
13 dB optical budget
•
Operating distance up to 3.2 miles (5.2 km)
•
Standalone or rack configurations
•
2-Channel Video
S702V
GE
s
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9239-1200
F 61-3-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Video
Channels 2
Format NTSC and PAL
Input/Output Signal 1.0 V p-p composite
Bandwidth 8 MHz
Signal-to-Noise Ratio > 50 dB
Video Resolution > 640 TVL
Input/Output
Impedance
Differential Phase 4°
Differential Gain 10%
Optical
Mode Multimode
Optical Budget* 13 dB
Emitter LED
Wavelength 850 nm
Operating Distance** 3.2 mi. (5.2 km)
Gain Control Optical Automatic
Electrical
Input Power,
Standalone Units
Input Power, Rack
Units
Transmitter Current
Requirement
Receiver Current
Requirement
Transmitter Power
Consumption
Receiver Power
Consumption
Power Factor 2 (receiver), 1
Protection Solid-state short
Optional Power
Supply
75 ohms
Gain Control (OAGC)
Tx @ 13.5 VDC
regulated/
Rx @ 13.5 VDC
regulated
13.5 VDC regulated
100 mA
200 mA
1.4 W
2.8 W
(transmitter) (rack
units only)
circuit protection
Model 610P (AC) or
Model 613P (DC)
12-14 VAC
Environmental
Operating
Temperature
Maximum Humidity 95% relative,
Mechanical
Dimensions, (LWD)
Standalone Tx
Dimensions, (LWD)
Standalone Rx
Dimensions, Rack
Unit
Weight, Standalone Tx 0.67 lb. (0.31 kg)
Weight, Standalone Rx 1.4 lb. (0.64 kg)
Weight, Rack Unit 0.61 lb. (0.28 kg)
Construction,
Standalone
Construction, Rack
Unit
-40 to 167°F (-40 to
75°C)
noncondensing
5.0 in. x 2.8 in. x 1.5 in.
127 x 71 x 38 mm
9.3 in. x 6.3 in. x 1.15 in.
236 x 161 x 29 mm
1 slot (1 in.)
Tx - Polycarbonate
Rx - Aluminum
Aluminum
Related Diagram Ordering Information
Use the Configurator below to select the options available for this product.
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S702V-2007-12-7
imagination at work
Loading...