Page 1
GE
Fiber Optic
Security
Overview
The S701V series provides high performance video over one or
two multimode fibers. The S701V system provides greater than 54
dB signal-to-noise ratio with a 10 MHz bandwidth and an optical
budget of 13 dB. The high bandwidth is ideally suited for handling
video feeds with embedded audio carriers.
Rack or Standalone Models
The S701V series consists of a transmitter and a receiver. The S701V
is available as a standalone unit and as a rack card for use in the
515R1/517R1 rack mount card cages. For multiple video signal
distribution, a two-channel version is available.
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals.
Video Transmitters and Receivers
Standard Features
One or two video channels
•
One-way video transmission over one or two multimode fibers
•
Video SNR >54 dB
•
10 MHz video bandwidth
•
Supports NTSC and PAL video formats
•
Optical AGC
•
13 dB optical budget
•
Operating distance up to 3.2 miles (5.2 km)
•
Standalone or rack configurations
•
One or TwoChannel Video
S701V
S701V2
Page 2
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Video
Channels 1 or 2
Format NTSC and PAL
Input/Output Signal 1.0 V p-p composite
Bandwidth 10 MHz
Signal-to-Noise Ratio > 54 dB
Video Resolution > 800 TVL
Input/Output
Impedance
Differential Phase 3°
Differential Gain 3%
Optical
Mode Multimode
Optical Budget∗ 13 dB
Emitter LED
Wavelength 850 nm
Operating Distance∗∗ 3.2 mi. (5.2 km)
Gain Control Optical Automatic
Electrical
Input Power,
Standalone Units
Input Power, Rack
Units
Transmitter Current
Requirement
Receiver Current
Requirement
Transmitter Power
Consumption
Receiver Power
Consumption
Power Factor 2 or 4 (receiver), 1
Protection Solid-state short
Optional Power
Supply
75 ohms
Gain Control (OAGC)
13.5 VDC regulated
13.5 VDC regulated
50 mA (1-channel)
100 mA (2-channel)
200 mA (1-channel)
400 mA (2-channel)
0.75 W (1-channel)
1.5 W (2-channel)
3.0 W (1-channel)
6 W (2-channel)
(transmitter) (rack
units only)
circuit protection
Model 610P (AC) or
Model 613P (DC)
Environmental
Operating
Temperature
-40 to 167°F (-40 to
75°C)
Maximum Humidity 95% relative,
noncondensing
Mechanical
Dimensions (LWD)
Standalone
Dimensions, Rack
5.0 in. x 2.8 in. x 1.5 in.
127 x 71 x 38 mm
1 slot (1 in.)
Unit
Weight, Standalone 0.28 lb. (0.13 kg)
Weight, Rack Unit 0.49 lb. (0.22 kg)
S701V or
0.61 lb. (0.28 kg)
S701V2
Construction,
Polycarbonate
Standalone
Construction, Rack
Aluminum
Unit
Related Diagram Ordering Information
Use the Configurator below to select the options available for this product.
1 or 2 Video
In
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S701V-2006-09-2
Transmitter
Optical Fiber
Receiver
1 or 2 Video
Out
S701V - ST
Receiver
No. of Fibers Product Type
2 2-Fiber
(Rack Card Only)
Omit for 1-FiberUnits
T Transmitter
R Receiver
Enclosure
E Standalone
R Rack Card
imagination at work
Loading...