Interlogix S700VT-TST Specsheet
GE
Fiber Optic
Security
Overview
S700VT series compact video transmitters are designed to transmit
standard analog baseband composite video up to 3.2 miles (5.2 km).
The units provide one-way video transmission over one multimode
fiber.
Installed in Camera Housings
The transmitter has been designed especially for easy installation
in environmental camera housings. These transmitters are intended
for use with any of the S700VR or S702VR series of receivers.
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals. The LEDs are provided on the S700VR or S702VR
receiver connected to the system.
Video Transmitters and Receivers
Standard Features
One-way video transmission over one multimode fiber
•
Single channel transmitter
•
Supports NTSC and PAL video formats
•
Designed for environmental housings
•
Video SNR >50 dB
•
8 MHz video bandwidth
•
Use with S700VR or S702VR receiver
•
13 dB optical budget with S700VR or S702VR receiver
•
Operating distance up to 3.2 miles (5.2 kms)
•
Compact Video
Transmitters
S700VT-MST Miniature and
S700VT-TST Ultra-compact
S700VT-TST
S700VT-MST
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Specifications
Video S700VT-TST S700VT-MST
Channels 1
Format NTSC and PAL
Input/Output Signal 1.0 V p-p analog composite
Bandwidth 8 MHz
Signal-to-Noise Ratio >50 dB
Video Resolution >640 TV lines
Input/Output
Impedance
Connector BNC on 18-inch (457 mm) cable
Optical
Mode Multimode
Optical Budget∗ 13 dB
Emitter LED
Wavelength 850 nm
Operating Distance∗∗ 3.2 mi (5.2 km)
Modulation Intensity modulation
Connector ST Type
Electrical
Input Power 13.5 VDC regulated 12 - 14 VAC or 13.5 VDC regulated
Current Requirement 50 mA
Power Consumption 0.75 W
Connection 8-inch (203 mm) cable Detachable screw terminal
Optional Power Supply Model 613P Model 610P (AC) or Model 613P (DC)
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions 0.56” (14 mm) diameter x
2.21” (56 mm) length
Weight 0.07 lbs (0.03 kg) 0.09 lbs (0.04 kg)
Construction Aluminum
Mounting Method Self-adhesive hook and loop fastener
75 ohms
(LWD): 2.67” x 1.05” x 0.95”
68 x 27 x 24 mm
Related Diagram
Transmitter
Video In Video Out
Receiver
Ordering Information
Use the model numbers at right when
ordering these products.
S700VT-MST
S700VT-TST
Optical Fiber
∗ Optical Budget based on 62.5 μm fiber, for 50/125 μm fiber subtract 3 dB.
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S700VT-2006-09-2
imagination at work
Loading...