GE
Fiber Optic
Security
Overview
Single-channel Video transmitters meet the challenge for a low
cost, high performance fiber optic video transmission system. The
series transmits one channel of baseband composite video up to
3.2 miles (5.2 km) over one multimode fiber.
Rack Mount, Standalone, or Kit
The S700V series consists of a transmitter and a receiver. It is available as a standalone unit and as a rack card for use in the 515R1/
517R1 rack mount card cages.
The S700VT-PKG includes a miniature transmitter (with an 18-inch
coax cable assembly), an S700V standalone receiver, and two 610P
AC power supplies.
Superior Diagnostics
The SMARTS™ diagnostic technology provides built-in diagnostic
tools including LEDs that monitor the operating status of the video
and optical signals.
Video Transmitters and Receivers
Standard Features
One-way video transmission over one multimode fiber
•
Single video channel
•
Supports NTSC and PAL video formats
•
Works with all cameras
•
Video SNR >50 dB
•
8 MHz video bandwidth
•
Optical AGC
•
13 dB optical budget
•
Operating distance up to 3.2 miles (5.2 km)
•
Standalone or rack configurations
•
>640 TV lines resolution
•
Works with all cameras
•
Rack Mount, Standalone, or Kit configurations available
•
Single-Channel Video
S700V and S700V-PKG
S700V-PKG
S700V
GE
Security
U.S.
T (561) 998-6100
T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada
T 519 376 2430
F 519 376 7258
Asia
T 852-2907-8108
F 852-2142-5063
Australia
T 61-3-9676-1300
F 61-3-9646-7005
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company
All Rights Reserved
Related Diagram
Video In Video Out
Transmitter
Optical Fiber
Receiver
Specifications
Video S700V S700V-PKG
Channels 1
Format NTSC and PAL
Input/Output Signal 1.0 V p-p composite
Bandwidth 8 MHz
Signal-to-Noise Ratio >50 dB
Video Resolution >640 TV lines
Input/Output Impedance 75 ohms
Differential Phase 4°
Differential Gain 10%
Optical
Mode Multimode
Optical Budget* 13 dB
Emitter LED
Wavelength 850 nm
Operating Distance** 3.2 mi (5.2 km)
Gain Control Optical Automatic Gain Control (OAGC)
Electrical
Input Power Standalone Units: 12 - 14 VAC
Transmitter Current Requirement 50 mA
Receiver Current Requirement 200 mA
Transmitter Power Consumption 0.70 W 0.75 W
Receiver Power Consumption 2.8 W 3 W
Power Factor 1 (transmitter), 2 (receiver) (rack units only)
Protection Solid-state short circuit protection
Power Supply Optional Model 610P (AC) or
Environmental
Operating Temperature -40 to 167 °F (-40 to 75 °C)
Maximum Humidity 95% relative, noncondensing
Mechanical
Dimensions (LWD)
Weight Standalone: 0.67 lbs (0.31 kg)
Construction Standalone: Polycarbonate
or 13.5 VDC regulated
Rack Units: 13.5 VDC regulated
Model 613P (DC)
Standalone Units:
5.0” x 2.8” x 1.5”
(127 x 71 x 38 mm)
Rack Units: 1 slot (1.0”)
Rack: 0.49 lbs (0.22 kg)
Rack: Aluminum
S700V-MST: 12 - 14 VAC
or 13.5 VDC regulated
S700V: 12 - 14 VAC
or 13.5 VDC regulated
Model 610P
(2 supplied)
Transmitter: 2.67” x 1.05” x 0.95”
(68 x 27 x 24 mm)
Standalone Receiver:
5.0” x 2.8” x 1.5” (127 x 71 x 38 mm)
Transmitter: 0.09 lbs (0.04 kg)
Receiver: 0.67 lbs (0.31 kg)
Receiver: Polycarbonate
Transmitter: Aluminum
Ordering Information
Use the Configurators below to select
the options available for these products.
Includes a miniature transmitter with an 18-inch (456 mm)
coax cable assembly, an S700V standalone receiver, and two
610P AC power supplies.
* Optical Budget based on 62.5 µm fiber, for 50/125 µm fiber subtract 3 dB.
** Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative.
S700V-2006-09-2
imagination at work
Loading...