Interlogix S30-RJ Specsheet

Page 1
®
IFS
Line / Network Transmission
Mini-GBIC SFP & SFP+ Transceivers
Small Form-factor Pluggable Transceiver Modules
OVERVIEW
The IFS SFP Transceiver Modules offer the ability to enable the SFP ports on any Ethernet equipment that have a built-in SFP Mini-GBIC interface. These modules are hot-swappable without any interruption of the host equipment operation.
These SFP modules are available in 100Base-FX/BX or 1000Base-TP/FX/BX confi gurations allowing for use of either one fi ber or two fi ber transmission over single mode or multi-mode optical fi ber. The 10 Gigabit SFP+ modules are available for single mode and multi-mode fi ber for use in IFS switches that support 10G SFP+ slots for high­bandwidth switch trunking and communication links.
Additionally, certain SFPs are available as wide-temperature versions for use in industrial equipment deployed in harsh environments.
STANDARD FEATURES
Design
• Plug-and-play capability for easy installation
• Hot-swappable
• Low power dissipation
Optical Performance
• Available in wide-temperature versions for harsh industrial applications
• Data rates of 100Mbps, 1.25Gbps or 10Gbps
• Single mode or multi-mode fi ber
• 1 or 2 fi ber confi gurations
• RJ-45 1.25Gbps SFP available
Standards Compliance
• Mini-GBIC Interface compliant
• Multi-source Agreement (MSA) compliant
• Class 1 laser safety standard IEC 60825 compliant
Warrant y
• 3-year warranty
interlogix.com
Page 2
Specifi cations
Pin Signal Name Description
1 VeeT Transmitter Ground
2 TX_FAULT Transmitter Fault Indication
3 TX_DISABLE Transmitter Disable
4 MOD_DEF (2) SDA Serial Data Signal
5 MOD_DEF (1) SCL Serial Clock Signal
6 MOD_DEF (0) TTL Low to indicate the SFP is present
7 RATE SELECT Not Connected (Open Circuit)
8 LOS Receiver Loss of Signal
9 VeeR Receiver Ground
10 VeeR Receiver Ground
11 VeeR Receiver Ground
12 RD- Inv. Received Data Out (Differential PECL, AC coupled)
13 RD+ Received Data Out (Differential PECL, AC coupled)
14 VeeR Receiver Ground
15 VccR Receiver Power Supply
16 VccT Transmitter Power Supply
17 VeeT Transmitter Ground
18 TD+ Transmit Data In (Differential PECL, AC coupled)
19 TD- Inv. Transmit Data In (Differential PECL, AC coupled)
20 VeeT Transmitter Ground
Electrical and Mechanical
Input Voltage 3.3V DC
Dimensions (W x D x H) 2.20 x 0.59 x 0.49 in. (59 x 15 x 12.4 mm)
Weight (ounces, grams) 0.6 oz, 18g
Storage Temperature -40ºC~85°C
Relative Humidity 5%~95% (non-condensing)
Reliability >50,000 hrs @ 25°C
Standards Compliance
EMI
EMS
Regulatory Standards
EN55022:2010, Class A EN61000-3-2: A1+A2:2009 EN61000-3-2: 2008
EN55024: 2010 IEC 61000-4-2:2008 IEC 61000-4-3:A1+A2:2010 IEC 61000-4-4:2012 IEC 61000-4-5:2005 IEC 61000-4-6:2008 IEC 61000-4-8:2009 IEC 61000-4-11:2004 AS/NZS Cispr22: 2010
FCC CFR 47, Part 15B, FDA 21 CFR 1040, CE Directive 2004/108/EC, EN60825-1 Laser Safety
Page 3
Dimensional Diagrams
Copper SFP
13.40
8.60
Dual Fiber SFP
13.40
8.60
TX
13.80
6.25 RX
13.80 PCB
45.20
24.90
56.00
45.00
56.00
24.00
70.00
14.00
1.7
2.20
2.20 8.60
Single Fiber SFP 10 Gigabit SFP+
13.40
6.85
8.60
15.00
13.80
PCB
8.60 1.901.90
15.00
13.4
56.00
24.90
45.00
8.601.87 1.72
Dimensions are in millimeters. All dimensions are ±0.20mm unless otherwise specifi ed.
15.00
1.95
45
47º
56
.91
2
.55
1.1 6
8.55
1.9
15.2 TX RX
2.218.5
13.9
6.25
Page 4
North America
T 855-286-8889
Latin America
T 561-998-6114
Mini-GBIC SFP & SFP+ Transceivers
Small Form-factor Pluggable Transceiver Modules
Ordering Information
Fast (100Mbps)
Part No. PHY Type
100Base-FX
S20-2MLC-2 100Base-FX 2 Multi-mode LC 1310nm 1310nm 2km -20 ~ -14 -32 12 0 ~ 50°C
S25-2MLC-2 100Base-FX 2 Multi-mode LC 1310nm 1310nm 2km -20 ~ -14 -32 12 -40 ~ 75°C
100Base-LX
S20-2SLC-20 100Base-LX 2 Single mode LC 1310nm 1310nm 20km -15 ~ -8 -34 19 0 ~ 50°C
S25-2SLC-20 100Base-LX 2 Single mode LC 1310nm 1310nm 20km -15 ~ -8 -34 19 -40 ~ 75°C
100Base-BX
S20-1SLC/A-20 100Base-BX20-U 1 Single mode LC 1310nm 1550nm 20km -14 ~ -8 -32 18 0 ~ 50°C
S20-1SLC/B-20 100Base-BX20-D 1 Single mode LC 1550nm 1310nm 20km -14 ~ -8 -32 18 0 ~ 50°C
Gigabit (1000Mbps)
Part No. PHY Type
Copper-RJ45
S30-RJ SFP-1000T - Copper RJ-45 - - 100m - - - 0 ~ 50°C
1000Base-SX
S30-2MLC 1000Base-SX 2 Multi-mode LC 850nm 850nm 220m/550m* -9.5 ~ -4 -17 7.5 0 ~ 50°C
S35-2MLC 1000Base-SX 2 Multi-mode LC 850nm 850nm 220m/550m* -9.5 ~ -4 -17 7.5 -40 ~ 75°C
S30-2MLC-2 1000Base-SX2 2 Multi-mode LC 1310nm 1310nm 2km** -9 ~ -1 -19 10 0 ~ 50°C
1000Base-LX/LHX/ZX
S30-2SLC-10 1000Base-LX 2 Single mode LC 1310nm 1310nm 10km -9.5 ~ -3 -20 10.5 0 ~ 50°C
S35-2SLC-10 1000Base-LX 2 Single mode LC 1310nm 1310nm 10km -9.5 ~ -3 -20 10.5 -40 ~ 75°C
S30-2SLC-30 1000Base-LHX 2 Single mode LC 1310nm 1310nm 30km -2 ~ +3 -23 21 0 ~ 50°C
S35-2SLC-30 1000Base-LHX 2 Single mode LC 1310nm 1310nm 30km -2 ~ +3 -23 21 -40 ~ 75°C
S30-2SLC-70 1000Base-ZX 2 Single mode LC 1550nm 1550nm 70km 0 ~ +5 -24 24 0 ~ 50°C
S35-2SLC-70 1000Base-ZX 2 Single mode LC 1550nm 1550nm 70km 0 ~ +5 -24 24 -40 ~ 75°C
1000Base-BX
S30-1SLC/A-10 1000Base-BX10-U 1 Single mode LC 1310nm 1490nm 10km -9 ~ -3 -20 11 0 ~ 50°C
S30-1SLC/B-10 1000Base-BX10-D 1 Single mode LC 1490nm 1310nm 10km -9 ~ -3 -20 11 0 ~ 50°C
S30-1SLC/A-20 1000Base-BX20-U 1 Single mode LC 1310nm 1490nm 20km -8 ~ -2 -23 15 0 ~ 50°C
S30-1SLC/B-20 1000Base-BX20-D 1 Single mode LC 1490nm 1310nm 20km -8 ~ -2 -23 15 0 ~ 50°C
S30-1SLC/A-60 1000Base-BX60-U 1 Single mode LC 1310nm 1490nm 60km 0 ~ +5 -24 24 0 ~ 50°C
S30-1SLC/B-60 1000Base-BX60-D 1 Single mode LC 1490nm 1310nm 60km 0 ~ +5 -24 24 0 ~ 50°C
# of
Fibers
# of
Fibers
Fiber Type Connector
Fiber Type Connector
TX
Wavelength
TX
Wavelength
RX
Wavelength
RX
Wavelength
Max.
Distance
Max.
Distance
Power
(dBm)
Power
(dBm)
RX Sen.
(dBm)
RX Sen.
(dBm)
Power
Budget
Power
Budget
Operating
Temperature
Operating
Temperature
10 Gigabit (10,000Mbps)
Part No. PHY Type
10 Gigabit (SFP+)
S40-2MLC 10GBase-SR 2 Multi-mode LC 850nm 850nm 300m*** -7.0 avg -11 7 0 ~ 70°C
S40-2SLC-10 10GBase-LR 2 Single mode LC 1310nm 1310nm 10km -8.0 avg -12 10 0 ~ 70°C
* 220m distance is based on 62.5/125 (OM1) fi ber. 550m distance is based on 50/125 (OM2) fi ber. ** Requires laser optimized 50/125 (OM3) fi ber to achieve 2km distance. FIber should be tested and verifi ed to OM3 standard. *** 300m distance with 10G is based on 50/125 (OM3) fi ber.
Legend
SFP Type Heading
Standard SFP
Hardened SFP (wide-temp)
# of
Fibers
Fiber Type Connector
TX
Wavelength
RX
Wavelength
Max.
Distance
Power
(dBm)
RX Sen.
(dBm)
Power
Budget
Operating
Temperature
interlogix.com
Specifi cations subject to change without notice.
© 2014 United Technologies Corporation.
Interlogix is part of UTC Building & Industrial Systems,
a unit of United Technologies Corporation.
408-3849 2014/08 (79013)
All rights reserved.
Loading...