Interlogix RCR-REX-B, RCR-REX-W Specsheet

Intrusion

RCR-REX

Dual technology request-to-exit
motion sensor

OVERVIEW

The RCR-REX is a dual technology, request-to-exit sensor used
for secure door egress and door access control. The RCR-REX
combines the power of passive infrared and Doppler range­controlled radar technologies to provide the industry’s most
secure request-to-exit sensor.

Historically, request-to-exit sensors have not been used in sensitive
areas because they were easy to defeat. With the RCR-REX, dual
technology requires that both the unit’s PIR sensor and RCR sensor
detect intrusion activity in order to trigger the internal relay. For
maximum protection, adjust the radar so that the curtain is above
the fl oor; objects slipped under the door will not activate the sensor,
making it virtually impossible to defeat.

The sensor has two detection patterns, the infrared PIR and the
Range Controlled Radar, that are adjusted independently. Radar
range can be adjusted from 3 to 15 feet (1 to 4.5 m) and can be
set to just above the fl oor if desired.

Two Form C output relay contacts are used to switch a door lock
and shunt a door switch. The RCR-REX’s fl exible lock relay may
be set to either Fail Safe or Fail Secure mode for operation when
the unit is not powered.

An LED indicator turns red for the duration of the lock relay time
when motion is detected and fl ashes twice per second during the
20-second warm-up period. It turns yellow when the radar detects
motion, and green when the passive infrared detects motion.

A tamper switch identifi es when the housing cover is opened.

STANDARD FEATURES

• Proprietary dual technology—request-to-exit uses both RCR
and PIR to detect intruders

• Incorporates two Form C output relay contacts

• Tamper switch detects device open

• Includes mask for easy adjustment of PIR fi eld of view

• Optional single gang wall plate

• Swing open design allows easy adjustment

• Housing available in white, gray, or black

• Built-in adjustable sounder for door position monitoring

• Wall or ceiling mount

• Dual relay outputs

The user can determine lock relay activation times with easy-to­change DIP switch settings. Factory default is 1/2 second, but
can be adjusted to 1, 2, 4, 8, 16, 32, or 64 seconds.

Depending on the settings chosen by the installer, when the
RCR-REX's sounder is turned on, it produces an audible tone
to warn of door-open-too-long (DOTL). Closing the door silences
the sounder, while new movement restarts the timer and resets
the sounder. A beeping tone will sound at the end of the external
input signal if the door is open.

interlogix.com

RCR-REX

Dual technology request-to-exit
motion sensor

North America

T 855-286-8889

Latin America

T 561-998-6114

Specifi cations

Electrical

Voltage 12 to 30VAC/VDC

Current

Time delay 1/2, 1, 2, 4, 8, 16, 32, 64 sec. at ± 10%, selectable

Loop type Open or Closed

Max. loop rating 2A @ 30VDC

Alarm output DPDT (Form C)

Tamper output 50mA @ 30VDC

Wire gauge AWG 14 to 22 (18 to 22 recommended)

Features

Radar frequency 5.8 GHz

Range, depth 3 to 15 ft. (0.9 to 4.57 m) adjustable

Range, width 7.9 ft. (2.4 m)

Range, PIR 15 ft. (4.6 m), adjustable

Environmental

Operating temperature -20°F~120°F (-29°C~50°C)

Relative humidity 0~95% (non-condensing)

RFI immunity 10 V/m @ 80 MHz to 2 GHz

Static immunity 10 kV

Lightning immunity 2.3 kV @ 1.4 J

23mA typical, 28mA max. @ 12VDC; 15mA typical, 17mA
max. @ 24VDC; 31mA typical, 38mA max. at 12VAC;
26mA typical, 29mA max. at 24VAC

Dimensional Diagram

7.395 in. (188 mm)

3.5 in. (89 mm)

1.76 in.

(45 mm)

1.85 in.

(47 mm)

1.76 in.

(45 mm)

Coverage Patterns

Door

Floor

Range:

3 to 15 ft.

(0.9 to 4.57 m)

Physical

Dimensions (HxWxD) 1.76 x 7.395 x 1.85 in. (45 x188 x 47 mm)

Weight 9.2 oz. (261 g)

Housing material ABS plastic

Colors White, black, gray

Mounting height 7 to 15 ft. (2.13 to 4.57 m) typical

Regulatory

FCC, CE, UL, CUL

Ordering Information

RCR-REX-W

RCR-REX-B

Dual Technology Request-To-Exit Motion Sensor, DPDT, Form C,
Includes Wall Plate, White

Dual Technology Request-To-Exit Motion Sensor, DPDT, Form C,
Includes Wall Plate, Black

Accessories

RCR-WP-W Single Gang Wall Plate, 2.25 x 8.375 in. (57 x 213 mm), White

RCR-WP-B Single Gang Wall Plate, 2.25 x 8.375 in. (57 x 213 mm), Black

RCR-REX sensor

Door

Floor

interlogix.com

Specifi cations subject to change without notice.

© 2014 United Technologies Corporation.

All rights reserved.

Interlogix is part of UTC Building & Industrial Systems,

a unit of United Technologies Corporation.

311-3750 2014/03 (76723)