Interlogix R1125T User Manual
604S
Connectors and Switches
GE Magnetic Contacts
R1125T Series
3
/
8
" Diameter Press Fit with Mini-Max Magnets
Gap Distance Closed Loop
Regular 1/2" R1125T
Wide 7/8" R1125TW
Color
Quantity
White
10
100% TESTED
R1125T-N
R1125T Series
3
/
8
" Diameter Press Fit with Mini-Max Magnets
Installation Instructions
Switch
1: Drill 3/
8
"
2: Strip wire from security system loop, insert into terminal block and tighten. Test for continuity.
dia. hole 11/
3: Lightly coat the contact RTV mounting compound (GE part number 1905) and insert into
respective hole.
Magnet
1: Mount magnet to double-sided tape (included) and affix to window frame.
2: Or, if using stainless steel screw (included), drill 1/
as a guide) and mount using #4 x 1/
screw other than the one provided, as it will effect the gap performance.
3: Care should be taken not to over tighten screw to avoid damage to magnet or stripping hole.
Recess/Flush Mount Magnet
1: Drill 7/
16
"
dia. hole (standard gap) or 5/
2: Coat magnet with RTV silicon adhesive and mount into hole.
NOTE: When surface mounting magnet be sure there is enough clearance to prevent the magnet from becoming
damaged when closing the window or door.
Standard Gap
Magnet
Part No. 1830
(included)
Wide Gap
Magnet
Part No. 1835
(included)
C-UL-US Specifications
Part Loop Electrical Gap
Number Type Configuration Distance
R1125T Closed N.O.
R1125TW Closed N.O.
**
European Union Specifications: 48 V AC/DC max, 0.5 Amp
**
FORM A (R1125T, R1125TW)
Voltage: 100 V AC/DC max
Current: 0.5 A max
Power: 7.5 W max
WARNING: Each electrical rating is an individual maximum and cannot be exceeded!
C-UL Specifications
.38"
9.5mm
8
"
deep for the contact.
.38"
9.5mm
1.08"
27.4mm
16
"
dia. (using magnet center hole
2
"
stainless steel screw (included). Use caution if using
8
"
dia. hole (wide gap) by approximately 1/
1.08"
27.4mm
.44"
11.1mm
.44"
11.1mm
.16"
4.06mm
.16"
4.06mm
.38"
.95mm
.60"
15.2mm
hole diameter:
#4 Countersink
#4 Countersink
1
/
7
/
8
"
deep .
.13"
3.3mm
hole diameter:
.13"
3.3mm
2
"
8
"
www.GE-Interlogix.com 2266 Second Street North
10341402 rev A
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5484
Technical Service: 800-777-2624
Made in Taiwan
GE Interlogix
Loading...