Interlogix R1125W-N, R1075-N, R1125-N Specsheet
S E N T R O L
P R O D U C T I N F O R M A T I O N B U L L E T I N
R1075/R1125 SERIES
MINI-MAX
™
MAGNETIC CONTACTS
3/8" Dia. Press Fit with
Mini-Max™ Magnets
Model numbers:
R1075, R1075W,
R1125, R1125W
T
R
O
L
N
Model R1075 (above) and Model R1125 (below).
U
L
LISTED
Patent pending.
E
S
S
• Rare-Earth Magnet Technology
delivers powerful magnetic force
• Ideal for vinyl-clad and custom
windows
• Magnets mount easily with glue,
double-stick tape, or stainless steel
screw
• Standard gap 1/2"; wide gap 1"
S
N
T
O
I
O
L
U
Sentrol’s R1075/R1125 Series Mini-Max™ Contacts
are Press Fit magnetic contacts with Mini-Max™
magnets. The Mini-Max™ magnets are available for
both the standard R1075 Press Fit and the “Stubby”
R1125 Press Fit.
Mini-Max™ magnets deliver strong protection in a
low-profile design – virtually eliminating the risk of
window damage during installation. Just 1/8" thick, the
magnets surface mount easily with glue, double-stick
tape (included), or stainless steel screw (included).
The R1075 and R1125 contacts are designed
specifically for applications where space is limited. The
short length of the “Stubby” R1125 contact makes it ideal
for thin framed windows and doors where larger units
cannot be used. Press Fit ribs on the R1075 and R1125
contact housings make for quick, easy installation.
Available in Two Configurations
The R1075/R1125 Series Mini-Max™ Contacts are
available with standard and wide gap magnets.
Standard Mini-Max™ magnets maintain a 1/2" gap,
while wide gap models have a gap distance of up to 1".
continued
Sentrol R1075/R1125 3/8" Dia. Press Fit with Wire Leads
Architects and Engineering Specifications
The R1075 contact measures 1.313" L x 0.425 Dia. (3.33 cm
x 0.952 cm) and the R1125 measures 0.75" L x 0.425 Dia.
(1.91 cm x 0.952 cm). Both switch housings shall have
three fins to press fit against the mounting hole. The reed
switch is hermetically sealed by a polyeurethane potting
compound and encapsulated in flame-retardant plastic.
Color shall be white or mahogany brown.
Mini-Max™ magnets shall surface mount with glue,
double-stick tape (provided) or stainless steel screw
(included). Or, recess mount 1/8" with a spade bit.
Standard gap Mini-Max™ magnets (Sentrol part number
1830) shall be 0.394" Dia. x 0.125" H (1.0 cm x 0.318 cm).
Wide gap Mini-Max™ magnets (Sentrol part number 1835)
shall be 0.591" Dia. x 0.125" H (1.50 cm x 0.318 cm).
Color shall be white or black.
Specifications:
Voltage...................................................... 100 V AC/DC max
Current .................................................................... 0.5 A max
Power..................................................................... 7.5 W max
R1075 Standard Gap
3.33 cm
R1075 Wide Gap
3.33 cm
R1125 Standard Gap
0.75"
1.91 cm
1.313"
1.313"
0.438"
0.952 cm
0.438"
0.952 cm
Part No. 1830
Part No. 1835
0.125"
0.318 cm
0.125"
0.318 cm
Magnet
(included)
0.125"
0.318 cm
Magnet
(included)
Hole diameter:
Hole diameter:
0.394"
1.0 cm
0.394"
1.0 cm
0.13"
0.33 cm
0.591"
1.50 cm
0.13"
0.33 cm
R1125 Wide Gap
0.75"
1.91 cm
0.438"
0.952 cm
0.438"
0.952 cm
Magnet
Part No. 1830
(included)
0.125"
0.318 cm
Magnet
Part No. 1835
(included)
Hole diameter:
ORDERING INFORMATION
Model Loop Type Electrical Color Choices Gap Distance*
Number Configuration
R1075 Closed N.O. White or Mahogany brown 1/2"
R1075W Closed N.O. White or Mahogany brown 1"
R1125 Closed N.O. White or Mahogany brown 1/2"
R1125W Closed N.O. White or Mahogany brown 7/8"
NOTE:
* Gap distances are nominal make distance ± 20%. Gap specifications are for switch to make. Break distance is
approximately 1.1 to 1.5 times make.
0.13"
0.33 cm
0.591"
1.50 cm
Hole diameter:
0.13"
0.33 cm
SENTROL
CORPORATE HEADQUARTERS
12345 SW Leveton Dr., Tualatin, OR 97062
Tel.: 503.692.4052 Fax: 503.691.7566
http://www.sentrol.com
U.S. & Canada: 800.547.2556
Technical Service: 800.648.7424
FaxBack: 800.483.2495
Sentrol reserves the right
to change specifications
without notice.
©1998 Sentrol
C-2091-FLG10K-1095
Printed on recycled paper.
Loading...