Interlogix AR1030, AR2000, AR2025, AT1000 Specsheet

®

All Others Models: 1310 nm

System Design

Line / Fiber Transmission

IFS

AT/AR1000 &
AR2000 Series

IFS Audio Transmitter/Receiver
and Transceiver

OVERVIEW

The IFS AT/AR1000 Series audio transmitter and receiver provide
one-way transmission of an audio signal on one optical fiber.
The IFS AR2000 Series a s bi-directional
transmission of one audio signal on one or two optical fibers. The
modules use frequency modulation (FM) for superior transmission
of balanced or unbalanced line-level audio (2.2V peak-to-peak).
Models within this series are available for use with multimode
or single mode optical fiber. Plug-and-play design ensures ease
of installation requiring no electrical or optical adjustments. The
modules incorporate power and carrier detect status indicating
LED’s for monitoring proper system operation. The modules are
available in either stand-alone or rack mount versions.

udio transceiver provide

APPLICATION EXAMPLES

• Transmission of Stage Mics from Pre-amp to Amplifier

• Recording Studios and Post-Production Facilities

• Transmission of Broadcast Audio Feeds

• Elimination of EMI/RFI Interference in Audio Cables

• Optical Isolation for Elimination of Ground Loop Noise

STANDARD FEATURES

• FM Audio Transmission

• 20 Hz – 20 kHz Bandwidth

• 600 Ohms Audio Input Impedance

• Transmits Balanced or Unbalanced Line-Level Audio
(2.2 Volts Peak-to-Peak)

• No In-field Electrical or Optical Adjustments Required

• Power and Carrier Detect Status Indicating LEDs to Monitor
System Performance

• Hot-Swappable Rack Modules

• Automatic Resettable Fuses on all Power Lines

• Meets NEMA TS-1/TS-2 & Caltrans Specifications (Temperature/
Humidity, Shock/Vibration, and Voltage Transient Protection)

• Distances up to 30 miles (49km) without Repeaters

• Comprehensive Lifetime Warranty

SYSTEM DESIGN

Mic

Pre-Amp Amp

AT1000

International

Fiber

Systems

ifs

Incorporated

203.426.1180

up to 2.8 miles

(4.5 km)

1 Fiber

62.5/125µm MM

AR1000

International

Fiber

Systems

ifs

Incorporated

203.426.1180

interlogix.com

Specifications

Data

Data Interface: RS-232 (data lines only), or RS-422 (see note)
Data Rate: DC - 1.5 Mbps (NRZ)
Operating Mode: Asynchronous Simplex or Full-Duplex
Bit Error Rate: <1 in 10˚

Wavelength D1010: 850 nm, MM D1010WDMA: 850/1310 nm, MM

D1010WDMB: 1310/850 nm, MM D1020: 1310 nm, MM
D1030: 1310 nm, SM D1030WDMA: 1310 nm, SM
D1030WDMB: 1550 nm, SM

Number Of Fibers D1010: 2 D1010WDMA: 1 D1010WDMB: 1 D1020: 2

D1030: 2 D1030WDMA: 1 D1030WDMB: 1

Connectors

Optical: ST
Data and Power: Terminal Block with Screw Clamps

Electrical & Mechanical

Power:
Surface Mount: 12 VDC @ 150 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†

†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.

GE

Security

North America
T 888-GE-SECURITY

888-437-3287
F 503-691-7566
E [e-mail]

Asia
T 852-2907-8108
F 852-2142-5063

Australia and New Zealand
T 613-9239-1200
F 613-9239-1299

Europe
T 44-113-238-1668
F 44-113-253-8121

Latin America
T 305-593-4301
F 305-593-4300

gesecurity.com/ifs

Specifications subject to
change without notice

© 2008 General Electric Company
All Rights Reserved

T/AR1000 & AR2000 Series

A

North America

T 855-286-8889

Latin America

T 561-998-6114

IFS Audio Transmitter/Receiver and Transceiver

Ordering Information

Part Number Description Fibers Required Optical Pwr. Budget Max. Distance*

Multimode 62.5/125µm** AT1000 Audio Transmitter (850 nm) 1 16 dB 2.8 miles (4.5 km)

AR1000 Audio Receiver (850 nm) 1 16 dB 2.8 miles (4.5 km)

AR2000 Audio Transceiver (850 nm) 2 16 dB 2.8 miles (4.5 km)

AR2010WDMA

AR2010WDMB Audio Transceiver (1310/850 nm) 1 16 dB 2.8 miles (4.5 km)

AR1030 Audio Receiver (1310 nm) 1 16 dB 10 miles (16 km)

Single Mode 9/125µm AT1025 Audio Transmitter (1310 nm) 17 dB 30 miles (49 km)

AR1030 Audio Receiver (1310 nm) 17 dB 30 miles (49 km)

AR2025 Audio Transceiver (1310 nm) 17 dB 30 miles (49 km)

Accessories ♦

Options Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)

*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.

♦ All accessories are third party manufactured.

PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)

Audio Transceiver (850/1310 nm) 1 16 dB 2.8 miles (4.5 km)



WDMA must mate with a WDMB

Specifications

Video

Input/Output Signal: 2.2 volts pk-pk

Input/Output Impedance: 600 ohms (Single ended or differential)

Bandwidth: 20 Hz - 20 KHz

Total Harmonic Distortion: <1.0%

Signal-to-Noise Ratio (SNR): 60 dB min.

Wavelength

Number Of Fibers

Connectors

Optical: ST

Power and Audio: Terminal Block with Screw Clamps

Electrical & Mechanical

Power:

Surface Mount 12 VDC @ 200 mA

Rack: From Rack

Number of Rack Slots: 1

Current Protection: Automatic Resettable Solid-State Current Limiters

Circuit Board: Meets IPC Standard

Size (in./cm.) (LxWxH)

Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm

Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm

Shipping Weight: < 2 lbs./0.9 kg

Environmental

MTBF: > 100,000 hours

Operating Temp: -40° C to +74° C

Storage Temp: -40° C to +85° C

Relative Humidity: 0% to 95% (non-condensing)

ATAR1000,2000: 850 nm, MM AR2010WDMA: 850/1310, MM
All Others Models: 1310 nm

1 or 2

Agency Compliance

Complies with FDA Performance

Standard for Laser Products, Title 21,

Code of Federal Regulations, Subchapter J

interlogix.com

Specifications subject to change without notice.

© 2013 United Technologies Corporation

All rights reserved.

Interlogix is part of UTC Building & Industrial Systems,

a unit of United Technologies Corporation.

AT/AR1000, AR2000 Series