Interlogix AR1000-R3, AR1000, AR1030-R3, AR2000-R3, AR2010WDMA-R3 Specsheet
...
GE
AT/AR1000, AR2000 Series
Security
Overview
The IFS AT/AR1000 series audio transmitter and receiver
provide one-way transmission of an audio signal on one
optical fiber. The IFS AR2000 series audio transceiver
provides bi-directional transmission of one audio signals on
one or two optical fibers. The modules use frequency
modulation (FM) for superior transmission of balanced or
unbalanced line-level audio (2.2 V peak-to-peak). Models
within this series are available for use with multimode or
single mode optical fiber. Plug-and-play design ensures
ease of installation requiring no electrical or optical adjustments. The modules incorporate power and carrier detect
status indicating LED’s for monitoring proper system operation. The modules are available in either stand-alone or
rack mount versions.
Application Examples
• Transmission of Stage Mics from Pre-amp to Amplifier
• Recording Studios and Post-Production Facilities
• Transmission of Broadcast Audio Feeds
• Elimination of EMI/RFI Interference in Audio Cables
• Optical Isolation for Elimination of Ground Loop Noise
IFS Audio Transmitter/Receiver
and Transceiver
Standard Features
• FM Audio Transmission
• 20 Hz – 20kHz Bandwidth
• 600 Ohms Audio Input Impedance
• Transmits Balanced or Unbalanced Line-Level Audio
(2.2 Volts Peak-to-Peak)
• No In-field Electrical or Optical Adjustments Required
• Power and Carrier Detect Status Indicating LEDs to
Monitor System Performance
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
• Meets NEMA TS-1/TS-2 & Caltrans Specifications
(Temperature/Humidity, Shock/Vibration, and
Voltage Transient Protection)
• Distances up to 30 miles (49 km) without Repeaters
• Comprehensive Lifetime Warranty
Audio Transmitter/
Receiver and
Transceiver
The ATAR1000 provides one-way
transmission of an audio signal on
one optical fiber, while the AR2000
provides bi-directional audio
transmission signals on one or
two optical fibers.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Audio
Input/Output Signal: 2.2 volts pk-pk
Input/Output Impedance: 600 ohms (Single ended or differential)
Bandwidth: 20 Hz - 20 KHz
Total Harmonic Distortion: <1.0%
Signal-to-Noise Ratio (SNR): 60 dB min.
Wavelength ATAR1000,2000: 850 nm, MM AR2010WDMA: 850/1310, MM
Number of fibers 1or2
Connectors
Optical: ST
Power and Audio: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 VDC @ 200 mA
Rack: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount: 7.7 x 5.0 x 1.0 in., 19.6 x 12.7 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
All Others Models: 1310 nm
Agency compliance
System Design
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Mic
Pre-Amp Amp
AT1000
ifs
203.426.1180
Ordering Information
Part Number
AT1000
AR1000
Multimode
62.5/125μm**
Single Mode
9/125μm
Accessories
©
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth.** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
AR2000
AR2010WDMA
AR2010WDMB
AT1020
AR1030
AT1025
AR1030
AR2025
PS-24VACCT 24 Volt AC Center Tap Power Supply
PS-24VACCT-230 24 AC Center Tap Power Supply 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Description
Audio Transmitter ((850 nm)
Audio Receiver (850 nm)
Audio Transceiver (850 nm)
Audio Transceiver (850/1310 nm)
Audio Transceiver (1310/850 nm)
Audio Transmitter ((1310 nm)
Audio Receiver (1310 nm)
Audio Transmitter ((1310 nm)
Audio Receiver (1310 nm)
Audio Transceiver (1310 nm)
Fibers Required
1
1
2
1
1
1
1
©
All accessories are third party manufactured.
up to 2.8 miles
(4.5 km)
International
Fiber
Systems
Incorporated
1 Fiber
62.5/125µm MM
Optical Pwr. Budget
16 dB
17 dB
AR1000
ifs
203.426.1180
International
Fiber
Systems
Incorporated
Max. Distance*
2.8 miles (4.5 km)
2.8 miles (4.5 km)
2.8 miles (4.5 km)
2.8 miles (4.5 km)
2.8 miles (4.5 km)
10 miles (16 km)
10 miles (16 km)
30 miles (49 km)
Loading...