Interlogix A2300SHR-R, A2325SHR-M, A2325SHR-R Specsheet
GE
A2300 Series
Security
Overview
The IFS A2300SHR series audio transceivers provide
distribution of balanced line-level (2.2 V peak-to-peak)
audio signals for emergency broadcast applications on two
optical fibers. The modules allow for the configuration of a
highly fault-tolerant emergency audio system. Utilizing a
self-healing ring topology provides a redundant audio path
via a counter rotating transmission on the second optical
fiber which enables the system to provide circuit integrity
in the event of a cable break. Both fault status indicating
LED’s and hard-wired contact outputs are provided for
each individual communication path for supervision of
proper systems performance. Models within this series are
available for use with multimode or single mode optical
fiber. Plug- and-play design ensures ease of installation
requiring no electrical or optical adjustments. The modules
are available in stand-alone only.
Application Examples
• Emergency Voice Evacuation
• Industrial Environments
• Campus Environments
Audio Repeater
Standard Features
• FM Audio Transmission
• Up to 40 Remotes in Ring Topology
• 20 Hz – 20kHz Bandwidth
• 600 Ohms Audio Input Impedance
• Provides a High Fault-Tolerant Emergency Broadcast
Audio Distribution System
• Transmits Balanced Line-Level Audio
(2.2 Volts Peak-to-Peak)
• No In-field Electrical or Optical Adjustments Required
• Power and Communication Fault Status Indicating LEDs
to Monitor System Performance
• TTL Output for Signal Fault Alarm
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
• Distances up to 30 miles (49 km) without Repeaters
• Comprehensive Lifetime Warranty
Emergency
Broadcast System
(EBS) Self Healing
Ring
Provides distribution of balanced
line-level audio signals for
emergency broadcast applications
on two optical fibers.
GE
Security
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E sales@ifs.com
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 32-2-719-9847
F 32-2-719-9846
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Specifications subject to
change without notice
© 2008 General Electric Company
All Rights Reserved
Specifications
Audio
Audio: Balanced, simplex
Input/Output Signal: 2.2 volts pk-pk
Impedance: 600 ohms
Bandwidth: 20 Hz - 20 KHz
Signal-to-Noise Ratio (SNR): 60 dB
Wavelength 850 or 1310nm, Multimode
1310 nm, Single Mode
Number of fibers 2 In/2 Out
Connectors
Optical: ST
Power and Audio: Terminal Block with Screw Clamps
Electrical & Mechanical
Power:
Surface Mount: 12 V @ 200 mA
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight: < 2 lbs./0.9 kg
Environmental
MTBF: > 100,000 hours
Operating Temp: -40° C to +74° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to
model number for conformal coating.
System Design
Agency compliance
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Remote
Master
A2300SHR
International
Fiber
Systems
ifs
Incorporated
203.426.1180
A2300SHR
International
Fiber
Systems
ifs
Incorporated
203.426.1180
4 Fibers
62.5/125µm MM
up to 2.8 miles
(4.5 km)
A2300SHR
International
Fiber
Systems
ifs
Incorporated
203.426.1180
A2300SHR
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Ordering Information
Part Number
Multimode
62.5/125μm**
Single Mode
9/125μm
Accessories
Options
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget. © All accessories are third party manufactured.
A2300SHR-M
A2300SHR-R
A2320SHR-M
A2320SHR-R
A2325SHR-M
A2325SHR-R
©
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Description
Audio Self-Healing Ring Master (850 nm)
Audio Self-Healing Ring Remote (850 nm)
Audio Self-Healing Ring Master (1350 nm)
Audio Self-Healing Ring Remote (1350 nm)
Audio Self-Healing Ring Master (1350 nm)
Audio Self-Healing Ring Remote (1350 nm)
Fibers Required
2 In/2 Out
2 In/2 Out
Opt. Pwr. Budget
16 dB
17 dB
Remote
International
Fiber
Systems
ifs
Incorporated
203.426.1180
Remote
In the event of a cable break, all
nodes on the network maintain
communication with the host.
Remote
Max. Distance*
2.8 miles (4.5 km)
10 miles (16 km)
30 miles (49 km)
Loading...