Interlogix 9910V1-R-R Specsheet

GE
Fiber Optic
Security
Overview
Exceptional Performance
The 99xxV series features 6.5 MHz per channel bandwidth and optical automatic gain control (OAGC). The system accepts analog baseband input signals and converts them to digital format for transmission, assuring high-quality video output at the receiver. These systems are compatible with NTSC and PAL video formats and are compliant with various international EMC and laser safety standards.
Superior Diagnostics
The SMARTS™ diagnostic technology includes LEDs that monitor the status of the video and optical signals.
Video Transmitters and Receivers
Standard Features
One-way transmission of 2 to 10 video channels over one single-
• mode fiber
Digital multiplexing technology
Supports NTSC and PAL video formats
>520 TV lines resolution
Video SNR >55 dB
6.5 MHz video bandwidth per channel
13 to 20 dB optical budget
Optical AGC
Built-in diagnostics
2-Channel to 10-Channel Video
99xxV
GE
Security
U.S. T (561) 998-6100 T 888-GE-SECURITY
888-(437-3287)
F 561 998 6224
Canada T 519 376 2430 F 519 376 7258
Asia T 852-2907-8108 F 852-2142-5063
Australia T 61-3-9239-1200 F 61-3-9239-1299
Europe T 32-2-719-9847 F 32-2-719-9846
Latin America T 305-593-4301 F 305-593-4300
www.gesecurity.com
© 2005 General Electric Company All Rights Reserved
Specifications
Video
Channels 2 to 10 Format NTSC, PAL Input/Output Signal 1.0 V p-p composite Bandwidth 6.5 MHz per channel Signal-to-Noise Ratio >55 dB Video Resolution >520 TV lines Input/Output
Impedance Differential Phase <2.5° Differential Gain <3%
Optical
Mode Single Mode Optical Budget,
2 - 10 Channels Emitter Laser Wavelength, 2 - 10
Channels Operating Distance ,∗∗
2 - 10 Channels
Gain Control Optical Automatic
Transmitter Launch Power, 2 - 10 Channels
Receiver Sensitivity, 2 - 10 Channels
75 ohms
13 or 20 dB (depending on model)
1310 nm or 1550 nm (depending on model)
20 mi (32 km) or 41 mi (66 km) (depending on model)
Gain Control (OAGC)
-6 dBm or -2 dBm (depending on model)
-19 dBm or -22 dBm (depending on model)
Electrical
Input Power 13.5 VDC nominal (10
Current Requirement 1.0 A Power Consumption 12 W Power Supply Model 613P
Environmental
Operating Temperature
Maximum Humidity 95% relative,
Mechanical
Dimensions (HWD), 2
- 10 Channel Units
Weight, 2 - 10 Channel Units
Construction Aluminum
VDC minimum, 30 VDC maximum)
-40 to 167 °F (-40 to 75 °C)
noncondensing
1.72” x 19.0” x 11.7” 44 x 483 x 297 mm
Transmitter 5.47 lbs (2.49 kg); Receiver
5.16 lbs (2.35 kg)
Related Diagram Ordering Information
2 to 10
Video In
∗∗ Operating distance is approximate and assumes best fiber. It will be affected by the type and number of splices in the fiber. Refer to update No. TB00-005, which can be found at www.gesecurity.com
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GESecurity online at www.GESecurity.com or contact your GE Security sales representative. 9900V-2006-09-2
Transmitter
Optical Fiber
Receiver
2 to 10
Video Out
Use the Configurator below to select the options available for this product.
imagination at work
Loading...