Interlogix 5414-W, 5415A-M, 5415A-W, 5425-M, 5425-W Specsheet

S E N T R O L

P R O D U C T I N F O R M A T I O N B U L L E T I N

5400 SERIES SHOCK GLASSBREAK SENSOR

Model numbers: 5414, 5415A, 5425, 5426, 5427, 5428

• Mounts on the frame or on the glass

• Models with internal magnetic reed switch for double detection

• Adjustable sensitivity for enhanced detection and reduced false alarms

• Use for 24-hour loop protection

The 5400 Series glassbreak shock sensor mounts

on windows or doors, either on the frame or on the glass.

The 5400 Series responds to the shock waves that are

created when the protected glass is broken. Adjustable

sensitivity allows each installation to be fine-tuned,

enhancing the sensor’s detection and minimizing nuisance

alarms.

The 5400 Series mounts quickly using special adhesive

strip or screws. The tape, formulated by 3M®, has been

field-tested with proven reliability.

The 5400 shock sensor is ideal for rooms where acoustic

sensors are not practical, such as acoustically live rooms,

small glass rooms, on glass mounted near kitchen sinks, in

high noise areas, and on a 24-hour loop.

Sensor range is up to 10' (3.5 m). Optional magnetic

reed and tamper switches are available. These models are

designed to detect forced openings and glass breaking

with one wire run.

continued

Sentrol 5400 Series Glassbreak Shock Sensor

Architects' and Engineers' Specifications:

The 5400 Series glassbreak sensors shall detect the shock produced from breaking glass. The shock sensors can be mounted to the frame or on the glass. The sensors use a specially mounted piezo element to trigger a solid state circuit into an alarm condition. The output loop opens and an LED lights for 2 to 6 seconds. The output loop shall have a bidirectional normally closed alarm loop. The detector shall have a sensitivity adjustment to optimize performance at each installation. Terminal blocks shall be provided for easy wire installation. The sensor will be available as a two-wire battery sensor, a four-wire externally powered (9-16 volts) sensor, and a six-wire sensor with separate reed or tamper loop. A field selectable latching LED feature shall be available on the powered models. The sensor shall be installed with a doublesided tape pad or screws.

Specifications:

Electrical

Operational Voltage ............................................ 9 to 16 V DC

Current Draw ....................................................... 15 mA max.

Resistance

Normal .............................................. <15 Ohms (closed)

Alarm .................................................... >1 MOhm (open)

Maximum loop rating .................................... 16 V DC, 50 mA

Loop configuration............................................... Closed loop

Output .................................... Open 2 to 6 seconds on alarm

Number of leads

5414, 5415A .............................................. 2 (alarm loop)

5425 .............................................................................. 4

5426, 5427, 5428 .......................................................... 6

Battery Models (5414, 5415A)

Battery type .......................................................... Lithium

Battery life ......................................... 15 years (estimated)

0.84"

0.54"

1.4 cm

2.1 cm

0.60"

1.5 cm

1.10"

2.8 cm

Environmental

3.46"

8.8 cm

6.5 cm

2.5"

Lightning suppression ................... 400 watts for 2 msec pulse

Operating temperature ............ –4ºF to 131ºF (–20ºC to 55ºC)

Features

Housing material ........................... Flame retardant ABS plastic

Sensitivity setting ..................................................... Adjustable

Range .......................................................... Up to 10' (3.5 m)

Glass types protected

Plate glass ........................................ Up to 1/4" (6.4 mm)

Tempered glass ................................ Up to 1/4" (6.4 mm)

Wired glass ...................................... Up to 1/4" (6.4 mm)

Laminated glass ............................... Up to 1/4" (6.4 mm)

Mounting location ............ Mount on glass or mount on frame

Mounting method ........... High bonding acrylic tape or screws

Dimensions .................................... 1.1" H x 0.84" W x 3.46" L

(2.8 mm x 2.1 mm x 8.8 mm)

Color ................................................ White, Mahogany brown

Ordering Information

Description Model Number Color

Shock sensor, lithium battery, tamper, 2-wire 5414-W White

Shock sensor, lithium battery, tamper, 2-wire 5414-M Mahogany brown

Shock sensor, lithium battery, tamper, 2-wire, alarm loop reed switch, magnet 5415A-W White

Shock sensor, lithium battery, tamper, 2-wire, alarm loop reed switch, magnet 5415A-M Mahogany brown

Shock sensor, external power, 4-wire, latching LED option 5425-W White

Shock sensor, external power, 4-wire, latching LED option 5425-M Mahogany brown

Shock sensor, external power, 6-wire, latching LED option, reed loop, magnet 5426-W White

Shock sensor, external power, 6-wire, latching LED option, reed loop, magnet 5426-M Mahogany brown

Shock sensor, external power, 6-wire, latching LED option, tamper loop 5427-W White

Shock sensor, external power, 6-wire, latching LED option, tamper loop 5427-M Mahogany brown

Shock sensor, external power, 6-wire, latching LED option, tamper loop, 5428-W White alarm loop reed switch, magnet

Shock sensor, external power, 6-wire, latching LED option, tamper loop, 5428-M Mahogany brown alarm loop reed switch, magnet

12345 SW Leveton Dr., Tualatin, OR 97062 Tel.: 503.692.4052 Fax: 503.691.7566 http://www.sentrol.com

Sentrol reserves the right

to change specifications

U.S. & Canada: 800.547.2556 Technical Service: 800.648.7424 FaxBack: 800.483.2495

SENTROL

G-1644-FLG20K-994

without notice.