Interlogix 430062001 Specsheet

BARIUM FERRITE BADGES

The Model 610 barium ferrite touch card reader is easy to
use, low cost and low maintenance. It is compatible with all
CASI microcontrollers and Entry Perfect

TM

, Secure Perfect

®

or Picture Perfect

TM

access control system software.

The reader allows site managers to extend the life of access
control systems by using barium ferrite badges.

The Model 610 reader is fully self-contained with all of the
electronics contained in the reader housing. The reader is
weather-resistant, making it suitable for outdoor use. The
Model 610 reader can be located up to 1,000 feet (305m)
from a Micro/2, Micro/4 or Micro/5 microcontroller.

READER OPERATION

Using the Model 610 Barium Ferrite Touch Card reader is a
one-step process. The user touches a CASI barium ferrite
badge to the stainless steel plate located on the front of the
reader. An LED indicator turns green if access is granted or
red if access is denied.

Model 610 readers 12VDC input power is typically provided
by the micocontroller. The reader outputs badge data in
Wiegand 3201 format. The microcontroller reader processor
must be set for Wiegand data input.

Important configuration note: a Micro/5 can be configured
with a Rusco-RP Reader Processor which supports barium
ferrite insertion readers (CR503 / ID503) and either a 2RP or
2SRP Reader Processor which supports operation of the
Model 610 barium ferrite touch card reader.

FEATURES

• Compatible with all CASI barium ferrite
access control badges

• Easy installation

• Virtually no maintenance

• Beveled reader face allows easy
card-to-plate placement

• Indoor and outdoor operation

• Suitable for high-throughput access
control applications

• Self-contained reader electronics

• Access indicator LED provides visual feed-back

• Vandal resistant

• Sturdy beige plastic housing with stainless steel
badge read plate

Model 610

BaFe Touch Card Reader

GE Interlogix, CASI division
791 Park of Commerce Boulevard
Suite 100, Boca Raton, FL 33487
Tel: [phone]
U.S.A. Toll Free: 1 [phone]
Fax: [phone]
Internet: http://www.ge-interlogix.com,
www.casi-rusco.com

General Information
E-mail: [e-mail]

Customer Support
E-mail: [e-mail]
U.S.A. Toll Free: 1 [phone]
International: [phone]

Training Department
E-mail: [e-mail]

For the Authorized CASI Business
Partner Nearest You:

United States/Canada
Tel: [phone]

Asia/Pacific
Tel: [phone]

Northern Europe
Tel: [phone]

Southern Europe /
Middle East / Africa
Tel: [phone]

Latin America/Caribbean
Tel: [phone]

MOUNTING REQUIREMENTS

The Model 610 includes a mounting bracket and gasket.
The reader is mounted directly to the wall with four
screws; an electrical box is not required. The reader is
then secured to the bracket with a flange and one secu­rity screw. The weather-seal gasket provides a moisture
barrier between the reader backplate and the wall or
mounting surface. The reader can be mounted directly
to a hollow wall, onto a back box (optional) when mount­ing to a solid wall, or to either a single- or dual-width USA
electrical box. An optional security wrench is required to
complete installation.

CUSTOMER SUPPORT

GE Interlogix and its CASI Business Partner Network
offer a full range of support services including site sur­veys, installation supervision and training. Emergency
support is available 24 hours a day, 7 days a week.

FOR MORE INFORMATION

Please contact the authorized CASI Business Partner list­ed below to see how Model 610 Barium Ferrite Touch
Card reader can meet your specific site requirements.

Literature contents may change at any time without notice.
Other product and company names herein may be the trademarks of their respective owners.
GE and GE Interlogix are registered trademarks of the General Electric Company.

©2000-2002 GE Interlogix, Inc. All rights reserved. 465031001Ce/08-00

Model 610
BaFe Touch Card Reader

SPECIFICATIONS

Color, Material

Sand beige, polycarbonate

Weight

14oz (0.40 Kg)

Dimensions

4.6"H x 4.0"W x 2.25"D
(11.70cm H x 10.16cm W x

5.72cm D)

Hardware/
Power
Requirements

Power: 12VDC at 200mA m 10%.
Microcontroller firmware: Micro/2,
Micro/4 - Universal EPROM
required. Micro/5’s require either a
2RP or 2SRP Reader Processor.

Installation

Security wrench required

Communication

Wiegand 3201 data output.
Maximum distance from
microcontroller is 1,000 feet (305m).

Environment

Indoor and outdoor

Door Strike
Relay

12/24VDC door strike relay,
installer provided

Operating
Temperature

–22°F to 158°F (–30°C to 70°C)

Relative
Humidity

0 to 90% non-condensing

Agency
Approvals

FCC Part 15 or Class B
CE Mark
UL 294

DESCRIPTION

ORDERING NUMBERS

Model 610 BaFe Touch
Card reader*, Wiegand
output, beige

430062001

Model 610 back box, beige

360021021

Installation wrench

380486001

* Installation wrench required

Model 610 Barium Ferrite Touch Card Reader