e
GE Security Product Data Sheet
3045-W
Surface mount panic switch, no LED indicator, with screw terminals
The Sentrol 3040/3050 series Panic Switch activates the
alarm output when the user pulls the actuating lever. On the
3040 model, an external LED lights and latches, indicating
that the alarm circuit has been activated. The lever is closed
first to rearm the alarm switch, then the latching LED circuit
is reset externally at the control panel. The 3045 model has
no LED or latching circuit. The 3050 model feature a glowing
LED for low light visibility. The LED glows green when
powered up, turns red upon activation. The 3050 also
contains a latching LED.
Applications
Mounted out of sight but within easy reach for manual
activation, such as under desks or counters in banks, jewelry
stores and other facilities where people or property are at
risk. The 3045 model can be used in residential installations
when a panic switch is needed. Models with the LED and
latching circuit can be used in commercial and high risk
applications.
Standard Features
E
Mounts underneath or on side of desk or counter
E
Smooth housing prevents accidental damage to clothing
E
Actuating lever designed to accommodate only tip of finger
E
Reed contact resets when lever is in closed position
E
Version with latching LED available
3045-W
Surface mount panic switch, no LED indicator, with screw terminals
Specifications
Operating voltage
Curent draw
Relay output
LED
Latching LED circuit
Dimensions (L x W x H)
Operating temperature
Connections
N/A
N/A
NC
No
No
74 x 45 x 19 mm
-40°C till +66°C
Screw terminals
Ordering Information
Part No. Description
3045-W
g
As a company of innovation, GE Security reserves the right to change product specifications without notice. For the latest product specifications, visit GE Security online or contact your GE Security sales representative.
IPS-ED-3045-W-2006-01-20 12:34:14
Surface mount panic switch, no LED indicator, with screw terminals, N/C
contact, white
GE Security
www.gesecurity.net