Interlogix 2500 User Manual

2500 Series Aluminum Housing

Installation Instructions

1030557C • August 2006

Introduction

This is the GE 2500 Series Aluminum Housing Installation Instructions for models 2505A-L, 2507A-L, 2507AD, 2507AH.

Installation

To install models 2505A-L, 2507A-L, 2507AD do the following:

1. Mount the switch and magnet so both labels read in the same direction (Figure 1). Use the screws supplied or 18/8 stainless steel screws.

Note: Switch position and gap distances will be reduced

Figure 1. Line up the labels

Mounting holes

0.156 in. (4 mm) dia.

when switch and magnet are positioned incorrectly.

2 in. (5.08 cm)

GE Security

3 in. (7.62 cm)

GE Security

Magnet included (part no. 1920)

1 in.

0.5 in. (1.27 cm)

Lead functions

Here are the lead colors and functions:

Lead color Function

Black Common

White Closed loop (NO)

Red Open loop (NC)

Specifications

Form A (2505A)

Voltage: 100 V max. Current: 0.5 A max. Power: 7.5 W max.

Form C (2507A, 2507AH, 2507AD)

Form A (2505A) ULC specifications

(2.54 cm)

Form A (2505A) European Union specification

Voltage: 30 V max. Current: 0.25 A max. Power: 3.0 W max.

Voltage: 30 V max. Current: 50 mA max.

Voltage: 48 V max. Current: 0.5 A max.

To install model 2507AH, do the following:

1. Mount switch in desired location.

2. Attach an ohmmeter to the black and white wires. The meter should read infinity with the magnet away from the switch.

3. Bring the magnet toward the switch until the meter reads zero ohms. Mark this position.

4. Bring the magnet closer to the switch until the meter reads infinity. Mark this position.

5. Position the magnet between the two marks.

6. Align the magnet and switch so the labels read in the same direction. With the magnet positioned in this manner, the switch will be harder to defeat with an external magnet.

Product ordering

Model number Loop type Electrical configuration Finish Gap distance (make) Lead type Listing 2505A-L Closed NO Anodized Up to 3 in. 3 ft. stainless steel armored cable UL, ULC 2507A-L Open or closed SPDT Anodized Up to 3 in. 3 ft. stainless steel armored cable UL, ULC 2507AD-L Open or closed DPDT Anodized Up to 1.5 in. 3 ft. stainless steel armored cable UL 2507AH-L Open or closed SPDT Anodized 0.75 in. min, 2.5 in. max 3 ft. stainless steel armored cable UL

Toll-free: 888.GESECURity (888.437.3287 in the US, including Alaska and Hawaii; Puerto Rico; Canada).

Outside the toll-free area: Contact your local dealer.

Technical support

www.gesecurity.com