Interlogix 2317A-L, 2325A-L Specsheet
S E N T R O L
P R O D U C T I N F O R M A T I O N B U L L E T I N
• Designed specifically for panel or
sectional style overhead doors
• Integrated mounting bracket
• Adjusts to fit most doors
• Fast installation with minimal
effort
• Wide operating gap distance
• Fewer service calls
• All necessary mounting hardware
included
continued
U
L
LISTED
U
N
D
E
R
W
R
I
T
E
R
S
L
A
B
O
R
A
T
O
R
I
E
S
O
F
C
A
N
A
D
A
L
I
S
T
E
D
B
Y
2300 SERIES PANEL
DOOR MAGNETIC
CONTACT
Model numbers: 2315, 2317, 2325, 2327
The Sentrol 2300 Series Panel Door magnetic
contacts are designed specifically for panel or sectional
style overhead doors. The unique design allows the
contact to be mounted directly to the door channel, with
the magnet mounted vertically on the door – off the
floor and out of harm’s way. This eliminates service
calls and false alarms that occur when typical floor-
mount contacts become damaged or as the door
becomes misaligned with normal usage. The contact’s
integrated mounting bracket is adjustable to fit most
door channel widths. Installation requires no special
tools and takes only a few minutes. The 2300 Series
contacts are constructed with a rugged extruded alu-
minum housing potted with Sentrol’s exclusive
polyurethane potting compound which makes the unit
corrosion resistant.
Sentrol 2315 Series Panel Door Magnetic Contacts
Contact and magnet shall be in extruded aluminum type
housing. Contact shall be sealed in Sentrol’s excusive
polyurethane potting compound. Mounting brackets shall be
furnished with contact.
Specifications:
Form A (2315, 2325)
Voltage........................................................ 100 V AC/DC max.
Current .................................................................... 0.5 A max.
Power...................................................................... 7.5 W max.
2315
2317
3.07"
(7.80 cm)
1.80"
(4.57 cm)
2.60"
(6.60 cm)
Form C (2317, 2327)
Voltage.......................................................... 30 V AC/DC max.
Current .................................................................. 0.25 A max.
Power...................................................................... 3.0 W max.
2315 / 2325
2315, 2317 – Fits 1.5" to 2.4" (3.81 cm to 6.10 cm)
2325, 2327 – Fits 2.75" to 3.25" (6.99 cm to 8.26 cm)
3.51"
(8.92 cm)
2.16"
(5.49 cm)
3.10"
(7.87 cm)
1.70"
(4.32 cm)
2.51"
(6.38 cm)
2325
2327
2.00"
(5.08 cm)
3.25"
(8.26 cm)
2.19"
(5.56 cm)
0.85"
(2.16 cm)
2.73"
(6.93 cm)
1.27"
(3.23 cm)
ORDERING INFORMATION
Model Loop Electrical Gap Distance
Number Type Configuration (Make)* Lead Type Listing
1.88"
(4.78 cm)
3.75"
(9.53 cm)
2.77"
(7.04 cm)
2315 Closed N.O. Up to 3" 2' vinyl jacketed UL
2315A Closed N.O. Up to 3" 2' stainless steel armored cable UL
2317 Open or Closed S.P.D.T. Up to 3" 2’ vinyl jacketed UL
2317A Open or Closed S.P.D.T. Up to 3" 2' stainless steel armored cable UL
2317AH Open or Closed S.P.D.T.
2317H Open or Closed S.P.D.T.
3
/4" min, 21/2 max 2' stainless steel armored cable UL
3
/4
" min, 2
1
/2
max 2' vinyl jacketed UL
2325 Closed N.O. Up to 3" 2' vinyl jacketed UL
2325A Closed N.O. Up to 3" 2' stainless steel armored cable UL
2327 Open or Closed S.P.D.T Up to 3" 2' vinyl jacketed UL
2327A Open or Closed S.P.D.T. Up to 3" 2' stainless steel armored cable UL
Note: *Gap distances are nominal make distance ±20%. Gap specifications are for switch to make.
Break distance is approximately 1.1 to 1.5 times make.
Protected by U.S. Patent 6,011,469.
CORPORATE HEADQUARTERS
12345 SW Leveton Dr., Tualatin, OR 97062
Sentrol reserves the right
to change specifications
Tel.: 503.692.4052 Fax: 503.691.7566
http://www.sentrol.com
U.S. & Canada: 888-437-3287
Technical Service: 800.648.7424
SENTROL
FaxBack: 800.483.2495
Printed on recycled paper
without notice.
©2000 Sentrol
C-3961-st20K-0500
Loading...