Interlogix 2315 User Manual
2315 Series
Panel Door Magnetic Contact
Models: 2315A, 2317A
Installation Instructions
Mounting
Caution: Locate the magnet away from manual
handles and latches to prevent it from being used
as a foothold or handle to close the door.
1. Slide the slot of the switch over the beveled-edge of
the L-bracket and snap it tightly into place as shown in
Figure 1. Screw down firmly.
Figure 1
Optional: Use the existing roller-track bolts to
mount the switch without using the L-Bracket as
shown in Figure 3.
Figure 3
3. Connect the switch wires to the alarm system and test to
verify proper operation.
Important: The contact should be mounted at
least 13 inches from the floor. If other trackmounted devices interfere, mount the switch under
them.
2. Align the magnet with the switch and use screws to
attach it to the door as shown in Figure 2. The switch
and magnet must be aligned within 1/2 inch of each
other to prevent false alarms.
Figure 2
elevation 1
1/4 to 1/2” spacing
elevation 2
The magnet can be attached at
two different elevations from
the door.
Fits standard 2” roller-tracks for
sectional/panel overhead
doors.
Figure 4
Dimensions Specifications
x
General
The contact shall be a hermetically sealed reed switch nominally 3.07” H x 1.80” W x 2.60” D with actuating magnet.
Fits 1.5” (3.8cm)
to 2.4” (6.1cm)
2.6”
6.6cm
Contact and magnet shall be in extruded aluminum type
housing. Contact shall be sealed in GE Interlogix exclusive
polyurethane potting compound. Mounting bracket shall be
furnished with contact. Contacts shall be specified as GE
Interlogix part numbers 2315A and 2317A. Contact is designed for installation on metal overhead door tracks.
USA Specifications
Form A (2315A)
Voltage 100V AC/DC max.
Current 0.5 A max.
Power 7.5 W max.
3.07”
7.8cm
2.0”
5.1cm
2.16”
5.5cm
3.1”
7.9cm
1.8”
4.6cm
0.85”
2.2cm
1.7”
4.3cm
1.88”
4.8cm
3.51”
8.9cm
2.51”
6.4cm
Form C (2317A)
Voltage 30V AC/DC max.
Current 0.25 A max.
Power 3.0 W max.
Canadian Specifications
Form A (2315A), Form C (2317A)
Voltage 30VDC max.
Current 50mA max.
European Union Specifications
Form A (2315A)
Voltage 48V AC/DC max.
Current 0.5A max.
WARNING: Each electrical rating is an
individual maximum and cannot be
exceeded!
Lead Functions
Form C (2317A)
Lead Color Function
Black Common
White Closed Loop (N.O.)
Re d Open Loop (N.C.)
Ordering Information
Model Loop Typ e Electrical Gap Distance Lead T ype Listing
Number Configuration (Make)*
2315A-L Closed NO Up to 3” 2’ stainless steel armored cable C UL-US
2317A-L Open or closed SPDT Up to 3” 2’ stainless steel armored cable C UL-US
*Gap distances are nominal make distance ±20%. Gap specifications are for switch to make. Break distance is approximately 1.1
to 1.5 times make.
GE Interlogi
www.GE-InterlogixSecurity.com
1030554 Rev B 09/03
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
T echnical Service: 800-648-7424
FaxBack: 800-483-2495
2266 Second Street North
North St. Paul, MN 55109
Phone: 651-777-2690
Made in T aiwan
Loading...