Interlogix 13-489 Specsheet

Speaker/StrobeCombination

Low Profile, Field Selectable Candela

13-487, 13-489

Product Information

Standard Features

UL listed for Wall or Ceiling mount.

Frequency range 400 Hz — 4000 Hz.

Integral blocking capacitor for line supervision.

Strobes are available in 15/75 — 30 /120 and 110 Candela Intensity. 24VDC polarized models

Designed to meet or exceed NFPA / ANSI Standards and ADA Accessibility Guidelines.

UL listed for fire protective service.

Field selectable taps from

4W — 2 Watts.

Screw terminals capacity up to 12 AWG.

GE Interlogix offers the low profile fire alarm speaker/strobe

which is designed to generate attention grabbing tones and voice

commands for emergency signaling evacuation applications. These

highly efficient low profile speakers are available with field

selectable taps from

4W – 2 Watts. The low profile speakers are

available with input voltage of 25 Vrms and can be installed on a

standard 4” x 4” x 1

2” electrical backbox without the need for an

extension ring. This speaker/strobe series is designed with a new

strobe. The strobe features a unique candela intensity field

selector switch for switching the candela output from 15/75 to

30/120 cd. The strobe housing is clearly labeled with “FIRE”

lettering and is polarized for connecting to supervised fire alarm

circuits. The strobe is designed with a xenon flashtube and

provides a candela intensity field selector switch for maximum

performance. The speaker/strobe series is available in red or

white housing 15/75 to 30/120 cd. and 110 cd models.

The strobe can be synchronized by using the 13-472 sync module

to comply with NFPA recommendations concerning photosensitive

epilepsy when installing 2 or more visual appliances within the

field of view. The strobe signals are listed for indoor use, ceiling

and wall mount, under UL 1971 standard.

The fire alarm speaker is approved for fire alarm signaling use

capable of reproducing alarm tones or voice commands on

25Vrms. Speakers provide incremental tap settings of

/4, 1/2, 1,

and 2 watts and are selected by means of a jumper wire. The

speaker has a frequency range of 400 to 4000 Hz and has an

operating temperature between 14°F and 140°F. The speaker

produces a UL sound pressure level at 10 feet up to 84dB. The

strobe is listed under UL 1971 standard for signaling devices for

the hearing impaired and is approved for fire protective service.

The candela output is field selectable, having a dual setting of

15/75 to 30/120 cd output. The signaling strobe operates on

24VDC from a non-coded regulated DC supply or full-wave

rectified, unfiltered supply. The signaling strobe is designed to

produce a signal flash of one flash per second (1 Hz) with

continuously applied minimum voltage. The 13-487 and 13-489 is

capable of wall or ceiling mounting. The visual signaling devices

are to be installed in all non-sleeping/corridor and sleeping areas

as per plans and specifications.

Overview

Architectural and Engineering Specifications

Polarized strobes with wide listed voltage ranges using filtered DC or unfiltered FWR input voltage.

Meets ADA guidelines for minimum one flash per/sec (1Hz)

All models mount to 4” x 4” x 11/2” square back box

Red

White

, 1, 2

15/75, 30/120

Yes

Speaker Strobe Combination

Low Profile, Field Selectable Candela 13-487, 13-489

25VRMS

13-487

13-489

Ordering Information

Model

Voltage Strobe Sync W/SMS1-33A Selectable Flash

Grille Type Color

Rating Candela Rating Module Wattage Rate/Min.

MEA Approved

Square

Round

Specifications

Rated Input Voltage 25V Input Power

W, 1 W, 2W

Impedance 2.5K, 1250, 620, 310 Ω

Sound Pressure Level 75, 78, 81, 84dB/10ft Frequency Response 400 — 4000Hz Low frequency Cut Off 200Hz Operating Temp. Range 14°F - 140°F

(-10°C – +60°C)

Strobe – only current draw

3.97"

101mm

3.38"

85.7mm

2.69"

68mm

7.25"

184mm

2.28"

58mm

0.59"

15mm

1.25"

32mm

3.97"

101mm

3.38"

85.7mm

2.69"

68mm

5.5"

140mm

2.28"

58mm

0.59"

15mm

1.25"

32mm

Dimensions

The strobes and synch module are listed for indoor use with a temperature operating range of 32°F – 120°F ( 0°C – 49°C).

Average Current (mA) Peak Current (mA) In-Rush Current (mA)

24 volt models 24 volt models 24 volt models

19.2V 24V 26.4V 19.2V 24V 26.4V 19.2V 24V 26.4V

Candela DC FWR DC FWR DC FWR Candela DC FWR DC FWR DC FWR Candela DC FWR DC FWR DC FWR

15/75 105 132 86 111 79 107 15/75 189 225 154 220 140 220 15/75 232 260 248 280 255 288 30/120 144 184 114 132 104 125 30/120 213 245 175 235 163 235 30/120 236 264 252 350 260 293

110 202 297 200 292 198 289 110 308 370 320 369 320 394 110 357 132 101 189 129 517

Round

Square

ADA