Interlogix 1125 User Manual
GE Magnetic Contacts
1125 Series
3
/8" Diameter Stubby Press Fit with Wire Leads
Gap Distance Closed Loop
Regular 1/4" 1125
Wide 3/4" 1125W
Color
Quantity
White, Mahogany Brown
10
100% TESTED
1125-N
1125 Series
3
/8" Diameter Stubby Press Fit with Wire Leads
Installation Instructions
Drill Mounting in Wood
3
/8" diameter holes 3/4" deep for both the contact and the magnet. Press them
Drill
into their respective holes.
Mounting in Aluminum Sliding Windows and Doors
Do not overdrill. Attach contact and magnet with RTV mounting compound or epoxy.
.75"
1.90 cm
.44"
1.11cm
.75"
1.90 cm
Magnet
Part No. 1946
(included)
UL Specifications
Part Loop Electrical Gap Distance Magnet
Number Type Configuration (Up To)
1125 Closed N.O.
1125W Closed N.O.
*
Gap Specifications are nominal and may vary ±20%. Gap Specifications are for switch to make.
Break distance is approximately 1.1 to 1.5 times make.
**
European Union Specifications: 48 V AC/DC max, 0.5 Amp
**
FORM A (1125, 1125W)
Voltage: 100 V AC/DC max
Current: 0.5 A max
Power: 7.5 W max
WARNING: Each electrical rating is an individual maximum and cannot be exceeded!
*
1
/4"
3
/4"
C-UL Specifications
All Contacts: 30 VDC, 50 mA max Gap Specifications:
See UL Gap Specifications
*
Length
3
/4"
3
/4"
www.GE-InterlogixSecurity.com 2266 Second Street North
PK-0984 Rev G 07/02
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5485
Technical Service: 800-777-2624
Made in Taiwan
GE Interlogix
Loading...