Interlogix 1085T User Manual
GE Magnetic Contacts
1085T Series
Surface Mount with Screw Terminals
Gap Distance Closed Loop SPDT
Regular 3/4" 1085T 1087T
Wide 11/2" 1085TW 1087TW
Extra Wide 2" 1084TW
Color
Quantity
White, Mahogany Brown, Grey
10
100% TESTED
1085T-N
1085T Series
Surface Mount with Screw Terminals
Installation Instructions
1. 1084TW, 1085T, 1085TW, 1087T, 1087TW Select desired mounting positions for contact and
magnet. On wide gap contacts (those with W suffix) align labels on contact and magnet so
labels read in the same direction (switches are polarity sensitive). Attach with screws.
2. General If protective cover is to be used to shield screw terminals, allow space for “ears” of cover
before tightening down mounting screws. Route connecting wires through holes provided in cover.
2.50"
6.35 cm
.63"
1.59 cm
.75"
1.91 cm
.56"
1.43 cm
2.09"
5.33 cm
UL Specifications
Part Loop Electrical Gap
Number Type Configuration Distance
1084TW Open or Closed SPDT 2"
1085T Closed N.O.
1085TW Closed N.O. 11/2"
1087T Open or Closed SPDT
1087TW Open or Closed SPDT 11/2"
*
Gap Specifications are nominal and may vary ±20%. Gap Specifications are for switch to make.
Break distance is approximately 1.1 to 1.5 times make.
**
European Union Specifications: 48 V AC/DC max, 0.5 Amp
**
FORM A (1085T, 1085TW) FORM C (1084TW, 1087T, 1087TW)
Voltage: 100 V AC/DC max Voltage: 30 V AC/DC max
Current: 0.5 A max Current: 0.25 A max
Power: 7.5 W max Power: 3.0 W max
WARNING: Each electrical rating is an individual maximum and cannot be exceeded!
.50"
1.27 cm
*
3
/4"
3
/4"
C-UL Specifications
All Contacts: 30 VDC, 50 mA max Gap Specifications:
See UL Gap Specifications
www.GE-InterlogixSecurity.com 2266 Second Street North
12302 Rev F 07/02
12345 SW Leveton Drive
Tualatin, OR 97062
Phone: 503-692-4052
USA & Canada: 800-547-2556
Technical Service: 800-648-7424
Faxback: 800-483-2495
North St. Paul, MN 55109
Phone: 651-777-2690
USA & Canada: 800-777-5485
Technical Service: 800-777-2624
Made in Taiwan
*
GE Interlogix
Loading...