Intel X18-M, SSDSA1MH080G1, X25-M, SSDSA2MH080G1 User Manual

Intel® X18-M/X25-M SATA Solid State Drive

SSDSA1MH080G1, SSDSA2MH080G1

Advance Product Manual

 Available in 1.8” and 2.5” Form Factors  Capacity: 80 GB  Uses Intel NAND flash memory Multi-Level Cell

(MLC) components

 Bandwidth Performance Specifications

— Sustained Sequential Read: Upto 250 MB/s — Sustained Sequential Write: Upto 70 MB/s

 PCMark* Vantage Benchmark HDD Score:

20,000

 Compatibility

—Intel

Matrix Storage Manager

— SATA Revision 2.6 compliant, compatible

with SATA 1.5 Gb/s and 3 Gb/s in terf ace

rates — ATA/ATAPI-7 Compliant — SSD Enhanced SMART ATA feature set — Native Command Queuing (NCQ) command

set

 Certifications

—UL* —CE* —C-Tick* —BSMI* —MIC* —Microsoft* WHQL —RoHS*

 Power Management

— 3.3 V (1.8”) or 5 V (2.5”) SATA Supply Rail — Supports ATA Power Management and

Advanced Power Management Specifications — SATA Interface Power Management — OS-Aware Hot Plug/Removal

 Power Specifications

— Active: 0.150 W TYP — Idle: 0.060 W TYP

 Temperature

—Operating: 0 — Non-Operating: -55

 Reliability

C to 70o C

C to 95o C

— Read Error Rate (BER): 1 sector per 10

bits read — Mean Time Between Failures (MTBF)

1,200,000 hours — Endurance Management Feature enables

five years minimal useful life

 Shock

— Operating and Non-operating: 1,000G/0.5

msec

 Vibration

— Operating: 2.17 G (7-800 Hz) — Non-operating 3.13 G (10-500 Hz)

 Weight

— 1.8” 5 mm Form Factor: 35 +/-2 grams — 2.5” 7 mm Form Factor: 80+/-2 grams — 2.5” 9.5 mm Form Factor: 86 +/-2 grams

Order Number: 319765-002US

July 2008

S D S A 1 8 0M H GS 0

Product Type Designator

SSD = Solid State Disk

Density

004G = 4 GB 008G = 8 GB 016G = 16 GB 032G = 32 GB 064G = 64 GB 080G = 80 GB

Product Generation

1-9 Generations

Bus Arc hit e c ture

PA = PATA SA = SATA US = Univ e r sa l Ser ial Bus

Form Factor

1 = 1.8" Drive 2 = 2.5" Drive

Product Technology Type

S = Single Level Cell M = Multi-Level Cell

Feature

H = High Performance

Ordering Information

Decoder

Intel High Performance Solid State Drive Ordering Information

Part Number MM # Device Nomenclature Packaging

SSDSA1MH080G1 895506 80 GB SATA 1.8” 5 mm Drive, MLC, 50 nm, Qualification Sample 1 unit SSDSA2MH080G1 895507 80 GB SATA 2.5” 7 mm Drive, MLC, 50 nm, Qualification Sample 1 unit SSDSA2MH080G1 898189 80 GB SATA 2.5” 9.5 mm Drive, MLC, 50 nm, Qualification Sample 1 unit

Intel® X18-M/X25-M SATA Solid State Drive Advance Product Manual July 2008 2 Order Number: 319765-002US

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLEC TUAL PRO PER TY RIGHTS IS GRANT ED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.

Intel may make changes to specifications and product descriptions at any time, without notice. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the

presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.

IMPORTANT - PLEASE READ BEFORE INSTALLING OR USING INTEL® PRE-RELEASE PRODUCTS. Please review the terms at http://www.intel.com/netcomms/prerelease_terms.htm carefully before using any Intel® pre-release product, including any

evaluation, development or reference hardware and/or software product (collectively, “Pre-Release Product”). By using the Pre-Release Product, you indicate your acceptance of these terms, which constitute the agreement (the “Agreement”) between you and Intel Corporation (“Intel”). In the event that you do not agree with any of these terms and conditions, do not use or install the Pre-Release Product and promptly return it unused to Intel.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not finalize a design with this information.

This Advance Product Manual as well as the software described in it is furnished under license and may only be used or copied in accordance with the terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document.

Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-

Intel® X18-M/X25-M SATA SSD

1.0 Introduction..............................................................................................................5

1.1 Product Overview................................................................................................5

1.2 Block Diagram .................................................................................................... 6

1.3 Architecture........................................................................................................6

2.0 Certifications.............................................................................................................6

3.0 Product Specifications ...............................................................................................7

3.1 Capacity ............................................................................................................7

3.2 Performance.......................................................................................................7

3.3 Electrical Characteristics.......................................................................................8

3.3.1 Supply Voltage.............................. .. ... ............................. .. .. .....................8

3.3.2 Power Consumption..................................................................................8

3.4 Environmental Conditions......................................... ................................ ............9

3.4.1 Temperature............................................................................................9

3.4.2 Altitude...................................................................................................9

3.4.3 Shock and Vibration..................................................................................9

3.4.4 Acoustics ................................................................................................9

3.4.5 Electromagnetic Immunity.......................................................................10

3.5 Reliability.........................................................................................................10

3.5.1 Nonrecoverable Read Errors.....................................................................10

3.5.2 Mean Time Between Failure .....................................................................11

3.5.3 Power On/Off Cycles............................................................................... 11

3.5.4 Minimum Useful Life ...............................................................................11

4.0 Mechanical Information...........................................................................................11

4.1 1.8” 5 mm Intel X18-M SATA SSD.......................................................................11

4.2 2.5” 7 mm Intel X25-M SATA SSD.......................................................................13

4.3 2.5” 9.5 mm Intel X25-M SATA SSD ................................................................ .. ..14

5.0 Pin and Signal Descriptions .....................................................................................15

5.1 Pin Locations ....................................................................................................15

5.1.1 1.8” Pin Locations............................ ... ............................. .. .. ...................15

5.1.2 2.5” Pin Locations............................ ... ............................. .. .. ...................16

5.2 Signal Description Table..................................... .. .. .. .............................. .. .. .. ......16

5.3 Hot Plug Support...............................................................................................18

6.0 Command Sets ........................................................................................................18

6.1 ATA Commands ................................................................................................18

6.1.1 ATA General Feature Command Set..........................................................18

6.1.2 Power Management Command Set............................................................21

6.1.3 Security Mode Feature Set.......................................................................21

6.1.4 SMART Command Set.............................................................................22

6.1.5 Host Protected Area Command Set...........................................................22

6.1.6 48-Bit Address Command Set ..................................................................23

6.1.7 Device Configuration Overlay Command Set ..............................................23

6.1.8 General Purpose Log Command Set..........................................................23

6.2 SATA Commands........................ ......................................................... ..............23

6.2.1 Software Settings Preservation.................................................................23

6.2.2 Native Command Queuing.......................................................................24

7.0 References ..............................................................................................................24

8.0 Terms and Acronyms ...............................................................................................25

July 2008 Advance Product Manual Order Number: 319765-002US 3

Intel® X18-M/X25-M SATA Solid State Drive

Intel® X18-M/X25-M SATA SSD

9.0 Revision History.......................................................................................................26

X18-M/X25-M SATA Solid State Drive

Intel Advance Product Manual July 2008 4 Order Number: 319765-002US

Intel® X18-M/X25-M SATA SSD

1.0 Introduction

The Intel® X18-M/X25-M SATA Solid State Drive (SSD) delivers leading performance in industry standard 1.8” and 2.5” form factors while simultaneously improving system responsiveness for mobile applications over standard rotating drive media or hard disk drives. By combining Intel’s leading NAND flash memory technology with our innov ative high performance controller, Intel delivers an SSD for Native Serial Advanced Technology Attachment (SATA) hard disk drive drop-in replacement with enhanced performance, reliability, ruggedness and power savings.

Since there are no rotating platters, moving heads, fragile actuaters, or unnecessary delays due to spin-up time or positional seek time that can slow down the storage subsystem significantly, the Intel X18-M/X25-M SATA SSD enables fast read/write access times and a significant I/O and throughput performance improvement as compared to rotating media or hard disk drives.

This document describes the specifications of the Intel X18-M/X25-M SATA SSD in the

1.8” and 2.5” form factors.

1.1 Product Overview

The Intel X18-M/X25-M SATA SSDs primarily target SATA based laptop PCs, highly rugged mobile client devices, as well as thin and light, mini/sub-notebooks. Key attributes include high performance, low power, increased system responsiveness, high reliability and enhanced ruggedness as compared to standard mobile SATA hard drives. Intel X18-M/X25-M SATA SSDs are available in 1.8” and 2.5” form factors that are electrically, mechanically, and software compatible with existing 1.8” and 2.5” Serial ATA slots and cables. Our flexible design allows interchangeability with existing mobile hard drives based on the SATA interface standard.

July 2008 Advance Product Manual Order Number: 319765-002US 5

Intel® X18-M/X25-M SATA Solid State Drive

1.2 Block Diagram

Intel

System

On A Chip

(SOC)

SATA Interface

Flash Memory

Channel 0

Flash Memory

Channel ...

Flash Memory

Channel n

NAND

Flash

Memory

NAND

Flash

Memory

NAND

Flash

Memory

Figure 1. Block Diagram

Intel

Intel® X18-M/X25-M SATA SSD

X18-M/X25-M SATA SSD

1.3 Architecture

2.0 Certifications

Table 1. Device Certifications

CE Compliant

UL Certified Underwriters Laboratories, Inc. Component Recognition UL60950-1.

C-Tick Compliant

BSMI Compliant

Intel Advance Product Manual July 2008 6 Order Number: 319765-002US

The Intel X18-M/X25-M SATA SSDs utilize a cost effective System on a Chip (SOC) design to manage a full SATA 3 Gb/s bandwidth with the host while managing multiple flash memory devices on multiple channels internally.

Certification Description

Indicates conformity with the essential health and safety requirements set out in European Directives Low Voltage Directive and EMC Directive.

Compliance with the Australia/New Zealand Standard AS/NZS3548 and Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

Compliance to the Ta iwan EMC standard “Limits and methods of measurement of radio disturbance characteristics of information technology equipment, CNS 13438 Class B.”

X18-M/X25-M SATA Solid State Drive

Intel® X18-M/X25-M SATA SSD

Table 1. Device Certifications (Continued)

Certification Description

Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility control

MIC Certified

Microsoft WHQL Microsoft Windows Hardware Quality Labs RoHS Compliant Restriction of Hazardous Substance Directive

Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

3.0 Product Specifications

3.1 Capacity

Table 2. User Addressable Sectors

Unformatted Capacity Total User Addressable Sectors in LBA Mode

80 GB 156,301,488

Notes:

1. 1GB=1,000,000,000 Byte and not all of the memory can be used for data storage.

2. 1 sector = 512Byte

3.2 Performance

Table 3. Maximum Sustained Read and Write Bandwidth

Access Type MB/s

Sequential Read Upto 250 Sequential Write Upto 70

Notes:

1. Performance measured using IOmeter with queue depth set to 32.

Table 4. PCMark* Vantage Benchmark

Benchmark Score

PCMark Vantage HDD Score 20,000

Note: Performance tests and ratings are measured using HP* Compaq* 6910p notebook with Intel Core™2 Duo CPU T7300 @

2.0 GHz processor and 2 GB DRAM running Microsoft* Windows Vista* Enterprise Edition and reflects the approximate performance as measured by that configuration. Any difference in system hardware or software design or configuration may affect actual performance.

July 2008 Advance Product Manual Order Number: 319765-002US 7

Intel® X18-M/X25-M SATA Solid State Drive

Intel

Intel® X18-M/X25-M SATA SSD

X18-M/X25-M SATA SSD

Table 5. Latency Specifications

Type Average Latency

Read 85 µs (TYP) Write 115 µs (TYP) Power On to Ready 1 s

Notes:

1. Write Cache Enabled.

2. Device measured using IOmeter.

3. Power On To Ready time assumes proper shutdown (power removal preceded by STANDBY command).

4. Read/Write latency measured on 4 K transfers.

3.3 Electrical Characteristics

3.3.1 Supply Voltage

Table 6. Operating Voltage

Description Min Max Unit

Operating Voltage for 3.3 V (+/- 5%) 3.14 3.47 V Operating Voltage for 5 V (+/- 5%) 4.75 5.25 V

3.3.2 Power Consumption

Table 7. Typical Power Consumption

Mode Typ Unit

Active 0.150 W

Idle 0.060 W

Active power is measured during execution of MobileMark* 2007 with DIPM (Device Initiated Power Management) enabled.

X18-M/X25-M SATA Solid State Drive

Intel Advance Product Manual July 2008 8 Order Number: 319765-002US

+ 18 hidden pages

Intel X18-M, SSDSA1MH080G1, X25-M, SSDSA2MH080G1 User Manual

Intel® X18-M/X25-M SATA Solid State Drive

Contents

1.0 Introduction

1.1 Product Overview

1.2 Block Diagram

Figure 1. Block Diagram

1.3 Architecture

2.0 Certifications

3.0 Product Specifications

3.1 Capacity

Table 2. User Addressable Sectors

3.2 Performance

Table 3. Maximum Sustained Read and Write Bandwidth

Table 4. PCMark* Vantage Benchmark

Table 5. Latency Specifications

3.3 Electrical Characteristics

3.3.1 Supply Voltage

Table 6. Operating Voltage

3.3.2 Power Consumption

Table 7. Typical Power Consumption