Intel SSDPAMM0004G1, SSDPAMM0016G1, SSDPAMM0008G1, SSDPAEM0004G1, SSDPAEM0008G1 Product Manual
...
Intel® Z-P230 PATA Solid State Drive
SSDPAMM0004G1, SSDPAMM0008G1, SSDPAMM0016G1,
SSDPAEM0004G1, SSDPAEM0008G1, SSDPAEM0016G1
Product Manual
Product Features
Capacities
—4 GB
—8 GB
— 16 GB
ONFI 1.0 compliant
PATA Compatibility
— ATA-5 compatible
—UDMA4 supported
— PIO Mode 4 supported
— MWDMA Mode 2 supported
— PATA ZIF connector
Performance
— Sustained Sequential Read Bandwidth:
38 MB/s
— Sustained Sequential Write Bandwidth:
10 MB/s
Form Fact or
— ZIF Connector
• 1.8 in (W) x 0.9 in (L) x 0.13 in (H)
• Weighs approximately 11 grams (TYP)
• Suggested ZIF cable length: 3 in
— Mini PCIe Form Factor
• 1.18 in (W) x 2 in (L) x 0.15 in (H)
• Weighs approximately 8 grams (TYP)
Reliability
— Mean Time Between Failure (MTBF)
1 Million Hours
— 3 Years Useful Life
Power Supply Voltage: 3.3 V ± 10% (TYP)
Power Consumption (Vcc = 3.3 V)
—Idle: <1 mW (TYP)
— Active: 445 mW (TYP)
Power Loss Protection: both hardware and
firmware help prevent data corruption in the
event of a power down during a WRITE cycle
Temperature
—Operating: 0
— Non-operating: 0
Shock and Vibration
o
C to 70oC
o
C to 85oC
— Shock: 600 G/2 ms
— Non-operating Vibration: 3.13 G, 5-500 Hz
— Operating Vibration: 1.1 G, 5-40 Hz
Compliances
— Lead free
—RoHS
Order Number: 319955-003US
September 2008
Ordering Information
S D P A M 0 4M 0 GS 0
Product Type Designator
SSD = Solid State Drive
Density
001G = 1 GB
002G = 2 GB
004G = 4 GB
008G = 8 GB
016G = 16 GB
032G = 32 GB
Product Generation
1-9 Generations
Bus Architectu re
PA = PATA
SA = SATA
US = Uni v e rsal Serial Bus
Form Factor
E = PCIe Module
M = Full Minicard
Product Technology Type
S = Single Level Cell
M = Multi-Level Cell
1
Reserved for Futu re Use
Intel Solid State Drive Product Name Decoder
Intel Z-P230 PATA SSD Ordering Information
Part Number Production MM # Device Nomenclature
SSDPAMM0004G1 898543 4 GB PATA SSD MLC ZIF Connector 100 pieces
SSDPAMM0008G1 898544 8 GB PATA SSD MLC ZIF Connector 100 pieces
SSDPAMM0016G1 899886 16 GB PATA SSD MLC ZIF Connector 100 pieces
SSDPAEM0004G1 899163 4 GB PATA SSD MLC PCIe Connector 100 pieces
SSDPAEM0008G1 899164 8 GB PATA SSD MLC PCIe Connector 100 pieces
SSDPAEM0016G1 899 165 16 GB PATA SSD MLC PCIe Connector 100 pieces
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLEC TUAL PRO PER TY RIGHTS IS GRANT ED BY THIS DOCUMENT. EXCEPT A S PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELA TING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for
use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the
presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel
or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.
IMPORTANT - PLEASE READ BEFORE INSTALLING OR USING INTEL® PRE-RELEASE PRODUCTS.
Please review the terms at http://www.intel.com/netcomms/prerelease_terms.htm carefully before using any Intel® pre-release product, including any
evaluation, development or reference hardware and/or software product (colle ctively, “Pre-Release Product”). By using the Pre-Release Product, you
indicate your acceptance of these terms, which constitute the agreement (the “Agreement”) between you and Intel Corporation (“Intel”). In the event
that you do not agree with any of these terms and conditions, do not use or install the Pre-Release Product and promptly return it unused to Intel.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not
finalize a design with this information.
This Preliminary Product Manual as well as the software described in it is furnished under license and may only be used or copied in accordance with the
terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be
construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear
in this document or any software that may be provided in association with this document.
Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means without the express written consent of Intel Corporation.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-
4725 or by visiting Intel's website at http://www.intel.com.
*Other names and brands may be claimed as the property of others. Copyright © 2008, Intel Corporation. All Rights Reserved.
Intel® Z-P230 PATA Solid State Drive
Product Manual September 2008
2 Order Number: 319955-003US
Packaging
Production
Intel® Z-P230 PATA SSD
Contents
1.0 Overview...................................................................................................................5
1.1 Key Features ...................................................... .. .. ................................ .. ..........6
1.2 Architecture........................................................................................................6
1.3 Block Diagram ....................................................................................................7
2.0 Regulatory Compliance..............................................................................................7
3.0 Product Specifications ............................................................................................... 8
3.1 Capacity ............................................................................................................8
3.2 Performance.......................................................................................................8
3.3 Operating Conditions ............................................................ .. .............................8
3.3.1 Maximum Ratings.....................................................................................8
3.3.2 Recommended Operating Conditions.............................. .. .. .........................9
3.4 Electrical Characteristics.......................................................................................9
3.5 Environmental Conditions....................................................................... .. .. .. ........9
3.5.1 Temperature............................................................................................9
3.5.2 Altitude...................................................................................................9
3.5.3 Shock and Vibration................................................................................10
3.5.4 Acoustics ..............................................................................................10
3.5.5 Electrostatic Discharge (ESD)...................................................................10
3.6 Reliability.........................................................................................................10
4.0 Mechanical Information...........................................................................................11
5.0 Pin Assignments and Signal Descriptions.................................................................14
5.1 Pin Assignments................................................................................................14
5.2 Signal Descriptions................................... .. ... ................................. ...................15
6.0 Command Sets ........................................................................................................16
6.1 ATA General Feature Command Set..................................................................... 16
6.1.1 IDENTIFY DEVICE DATA................................ .. .. .. .................................. ..17
6.1.2 READ MULTIPLE and WRITE MULTIPLE Command Value...............................20
6.1.3 SET FEATURES Subcommands .................................................................20
6.1.4 SMART Subcommand Set ........................................................................20
6.2 Power Management Command Set.......................................................................21
7.0 References .............................................................................................................. 21
8.0 Additional Product Information ...............................................................................22
9.0 Glossary ..................................................................................................................22
10.0 Revision History ......................................................................................................23
September 2008 Product Manual
Order Number: 319955-003US 3
Intel® Z-P230 PATA Solid State Drive
Intel® Z-P230 PATA SSD
Intel® Z-P230 PATA Solid State Drive
Product Manual September 2008
4 Order Number: 319955-003US
Intel® Z-P230 PATA SSD
1.0 Overview
The Intel® Z-P230 PA TA Solid-State Drive (SSD) devices are available in either a 4 GB,
8 GB or 16 GB capacities featuring either a Zero Insertion Force (ZIF) connector or Mini
PCIe form factor for notebooks. The targeted application is for notebook computers
which require a small capacity and durable, low-power storage.
The Intel Z-P230 PATA SSD is electronically-drop-in compatible with mechanical PATA
Hard Disk Drives, but delivers faster boot—the loading and execution of applications
with no moving parts—leading to faster system responsiveness and longer battery life.
Figure 1. Front View of the Intel Z-P230 PATA SSD with ZIF Connector
Figure 2. Front View of the Intel Z-P230 PATA SSD with Mini PCIe Connector
September 2008 Product Manual
Order Number: 319955-003US 5
Intel® Z-P230 PATA Solid State Drive
1.1 Key Features
• 4 GB, 8 GB and 16 GB capacity
•ATA UDMA4 support
• ZIF connector or Mini PCIe form factor
•Weight
— ZIF connector: approximately 11 grams
— Mini PCIe form factor: approximately 8 grams
• Less than 1mW idle power (TYP)
•445 mW active power (TYP)
• Uses Intel MLC NAND Flash Memory
• Sequential read: 38 MB/s
• Sequential write: 10 MB/s
• Footprint
— ZIF connector: 38 mm (L) x 54 mm (W) x 3.2 mm (H)
— Mini PCIe form factor: 50.95 mm (L) x 30 mm (W) x 3.8 mm (H)
Intel® Z-P230 PATA SSD
1.2 Architecture
The Intel Z-P230 PATA Solid State Drive is a dual-channel PAT A controller driven SSD
available in a ZIF connector or mini PCIe form factor.
The PA TA controller in the Intel® Z-P230 PAT A Solid State Drive uses a microcontrollerbased architecture that enables two flash memory channels to service read and write
operations. See Figure 3, “Functional Block Diagram of Intel Z-P230 PATA Solid State
Drive” on page 7. Capable of performing flash management functions, the SSD also
implements internal wear leveling to minimize system overhead.
Intel Z-P230 PATA Solid State Drives use Intel MD516 NAND Flash Memory multi-level
cell (MLC) thin-small outline package (TSOP) devices in three capacities: 4 GB, 8 GB
and 16 GB. Refer to the Intel MD516 NAND Flash Memory Datasheet for details about
this component. Please see Section 8.0, “Additional Product Information” on page 22
for more information.
Intel MLC NAND uses the industry-standard ONFI NAND flash memory command set
that is capable of program page cache mode, page read cache mode, two plane
commands and interleaved die operations.
Intel® Z-P230 PATA Solid State Drive
Product Manual September 2008
6 Order Number: 319955-003US
Intel® Z-P230 PATA SSD
PATA Interfac ePATA Interfac e
PATA
Controller
Channel 0
DATA 0 [0-7]
Channel 0
DATA 0 [0-7]
Channel 1
DATA 1 [0-7]
Channel 1
DATA 1 [0-7]
NAND
Flash
Memory
NAND
Flash
Memory
1.3 Block Diagram
Figure 3. Functional Block Diagram of Intel Z-P230 PATA Solid State Drive
2.0 Regulatory Compliance
The Intel Z-P230 PATA SSD is compliant with the restriction of Hazardous Substances
(RoHS) directive. It also conforms with standards of CE Mark for European consumer
electronic compliance.
Since the Intel Z-P230 PATA SSD is intended to be contained solely within a personal
computer or similar enclosure (not attached as an external device), the SSD is tested in
representative end-user systems. While the Intel Z-P230 PATA SSD is EMC compliant
(Specification EN55022), computer manufacturers and system integrators should
confirm EMC compliance and provide CE marking for their products.
As a subassembly, no Federal Communications Commission verification or certification
of the device is required. Intel Corporation has tested this device in enclosures to
ensure that the SSD does comply with the limits for a Class B computing device,
pursuant to Subpart J, Part 15 of the FCC rules.
Table 1. Device Compliance
Compliance Description
CE
PB Free Components and materials are lead free.
RoHS Restriction of Hazardous Substance Directive
Indicates conformity with the essential health and safety requirements set out in European Directives
Low Voltage Directive and EMC Directive.
September 2008 Product Manual
Order Number: 319955-003US 7
Intel® Z-P230 PATA Solid State Drive
Intel® Z-P230 PATA SSD
3.0 Product Specifications
3.1 Capacity
Table 2. Capacity and User Addressable Sectors
Unformatted User Addressable Sector in LBA mode
4 GB* 7,880,544
8 GB* 15,761,088
16 GB* 31,522,176
Note: Formatting and other functions will use some of the space, thus the listed capacity will not be available entirely for data
storage.
3.2 Performance
Table 3. Read and Write Performance
Operation Access Type MB/second
READ Sustained Sequential Read Bandwidth 38
WRITE Sustained Sequential Write Bandwidth 10
Notes:
1. Queue depth is set to 1.
2. Device measured using IOmeter*.
3. Sampled, not tested.
3.3 Operating Conditions
3.3.1 Maximum Ratings
Stresses greater than those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only, and functional oper ation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not guaranteed. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
Table 4. Absolute Maximum Ratings by Device
Parameter Symbol Min Max Unit
Vcc supply voltage Vcc -0.6 +4.6 V
Non-operating temperature Tstg 0 85 °C
Intel® Z-P230 PATA Solid State Drive
Product Manual September 2008
8 Order Number: 319955-003US
Loading...