Intel SR1530CL - Server System - 0 MB RAM, SR1530HCLRNA - Server System - 0 MB RAM, SR1530HCL, SR1530HCLS, SR1530CLR User Manual
...
Intel® Server System SR1530CL /
®
SR1530HCL / SR1530HCLS and Intel
Server System SR1530CLR /
SR1530HCLR / SR1530HCLSR User
Guide
A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products
Intel Order Number D68456-00
5
Disclaimer
Information in this document is provided in connection with Intel® products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,
without notice.
Intel server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation
can not be held responsible if components fail or the server board does not operate correctly when used outside any
of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2010, Intel Corporation. All Rights Reserved
ii Server System User Guide
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the
instructions. See also Intel Server Boards and Server Chassis Safety Information on the
®
Server Deployment Toolkit 2.0 CD and/or at http://support.intel.com/support/
Intel
motherboards/server/sb/cs-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor
Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu
Intel-Serverplatinen und Servergehäusen auf der Intel
oder unter http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
®
Server Deployment T oolkit 2.0 CD
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce
document avant de suivre toute instruction. Consultez Intel Server Boards and Server
Chassis Safety Information sur le Intel
rendez-vous sur le site http://support.intel.com/support/motherboards/server/sb/cs-
010770.htm.
®
Server Deployment Toolkit 2.0 CD ou bien
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar
cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety
Information en el Intel
support.intel.com/support/motherboards/server/sb/cs-010770.htm.
®
Server Deployment Toolkit 2.0 CD y/o en http://
Server System User Guide iii
重要安全指导
在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。 和/或
http://support.intel.com/support/motherboards/server/sb/CS-010770.htm
上的 Intel
Server Boards and Server Chassis Safety Information（《Intel
服务器主板与服务器机箱安全信息》）。
iv Server System User Guide
Warnings
Heed safety instructions: Before working with your server product, whether you are
using this guide or any other resource as a reference, pay close attention to the safety
instructions. You must adhere to the assembly instructions in this guide to ensure and
maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of the product and
will most likely result in noncompliance with product regulations in the region(s) in which
the product is sold.
System power on/off: The power button DOES NOT turn off the system AC power. To
remove power from system, you must unplug the AC power cord from the wall outlet.
Make sure the AC power cord is unplugged before you open the chassis, add, or remove
any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be
present on power, telephone, and communication cables. Turn off the server and
disconnect the power cord, telecommunications systems, networks, and modems attached
to the server before opening it. Otherwise, personal injury or equipment damage can
result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,
boards, and other parts. We recommend that you perform all procedures in this chapter
only at an ESD workstation. If one is not available, provide some ESD protection by
wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on
your server when handling parts.
ESD and handling boards: Always handle boards carefully. They can be extremely
sensitive to ESD. Hold boards only by their edges. After removing a board from its
protective wrapper or from the server, place the board component side up on a grounded,
static free surface. Use a conductive foam pad if available but not the board wrapper. Do
not slide board over any surface.
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips
over two jumper pins. Some jumpers have a small tab on top that you can grip with your
fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab,
take care when using needle nosed pliers to remove or install a jumper; grip the narrow
sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can
damage the contacts inside the jumper, causing intermittent problems with the function
controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool
you use to remove a jumper, or you may bend or break the pins on the board.
Server System User Guide v
vi Server System User Guide
Preface
About this Manual
Thank you for purchasing and using the Intel® Server System SR1530CL / SR1530HCL /
SR1530HCLS and/or the Intel
SR1530HCLSR.
This manual is written for system technicians who are responsible for troubleshooting,
upgrading, and repairing this server system. This document provides reference
information, feature information, and step by step instructions on how to add and replace
components on the server system. For the latest version of this manual, see http://
support.intel.com/support/motherboards/server/chassis/S5000VCL/.
Manual Organization
Chapter 1 provides an overview of the server system. In this chapter, you will find a list of
the server system features, illustrations of the product, and product diagrams to help you
identify components and their locations.
Chapter 2 provides instructions on using the utilities that are shipped with the board or
that may be required to update the system. This includes how to navigate through the
BIOS Setup screens, how to perform a BIOS update, and how to reset the password or
CMOS. Information about the specific BIOS settings and screens is available in the Intel
Server Board S5000VCL Technical Product Specification. See “Server System
References” on page ix for a link to the Technical Product Specification.
®
Server System SR1530CLR / SR1530HCLR /
®
Chapter 3 provides instructions on adding and replacing components. Us e this chap ter for
step-by-step instructions and diagrams for installing or replacing components such as the
fans, power supply, drives, and other components.
At the back of this manual, you will find technical specifications, troubleshooting
information, complete safety information, regulatory information, "getting help"
information, and the warranty.
Product Contents
The Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS ships with the Intel®
Server Board S5000VCL.
Server System User Guide vii
The Intel® Server System SR1530CLR / SR1530HCLR / SR1530HCLSR ships with the
®
Server Board S5000VCLR.
Intel
Intel® Server System Contents
Your Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS and/or the Intel®
Server System SR1530CLR / SR1530HCLR / SR1530HCLSR ships with the following
items:
• One Intel
• One 400-watt power supply module, installed in the server system
• One low-profile riser, installed in the server system
• Two system blowers, with attached cables, installed in the server system
• (SR1530CL/SR1530CLR) One PCI cooling fan
• (SR1530HCL/SR1530HCLR) One PCI cooling baffle
• (SR1530CL/SR1530CLR) One hard disk drive 0 bracket
• (SR1530CL/SR1530CLR) One hard disk drive 1 bracket
• One slimline optical drive installation kit, in the server system product box
• (SR1530CL/SR1530CLR) Screws:
®
Server Board S5000VCL/S5000VCLR, installed in the server system
— 24 6-32 flat-head screws for attaching the slimline optical drive and hard disk
drives to the chassis, and for attaching hard disk drives to the hard disk drive
brackets
— One 6-32 pan-head screw for the hard disk drive attached to the chassis
— Four M1.5 screws for attaching the brackets to the slimline optical drive
— Two M2 screws for attaching the interposer board to the slimline optical drive
• (SR1530HCL/SR1530HCLR) Screws:
— 24 6-32 flat-head screws for attaching the hard disk drives to the drive carriers
— Two M1.5 screws for attaching the bracket to the slimline optical drive
— Two M2 screws for attaching the interposer board to the slimline optical drive
• Rack handles, in the server system product box
• One control panel, installed in the server system
• One rail kit, in a separate box
• One CD kit
• One Quick Start User’s Guide
• One Attention document
viii Server System User Guide
• (SR1530CL/SR1530CLR) Cables:
— Two SATA cables, in the server system product box
— One IDE cable, in the server system product box
— One front panel cable, installed in the server system
• (SR1530HCL/SR1530HCLR) Cables
— Three SAS/SATA cables, installed in the system
— One IDE cable, in the server system product box
— One front panel cable, installed in the server system
— One USB front panel cable, installed in the server system
— One SGPIO cable, installed in the server system
Server System References
If you need more information about this product or information about the accessories that
can be used with this server system, use the following resources.
For this Information or
Software
Technical information
about the server chassis,
including sub-system
overviews and
mechanical drawings
Technical information
about the server board,
including board layout,
connector pin-outs, timing
information, mechanical
drawings and LED
information
If you just received this
product and need to
install it
Accessories or other Intel
server products
Use this Document or Software
®
Intel
Server Chassis SR1530 Technical Product Specification
Found at: http://support.intel.com/support/motherboards/server/
S5000VCL/
®
Intel
Server Board S5000VCL Technical Product Specification
Found at: http://support.intel.com/support/motherboards/server/
S5000VCL/
Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS
Quick Start User's Guide
®
Intel
Server System SR1530CLR / SR1530HCLR /
SR1530HCLSR Quick Start User's Guide
Found in the product box
Spares and Configuration Guide
Found at: available from your Intel field representative or on the
Server Configurator Tool at http://indigo.intel.com/
serverconfiguratortool/default.aspx
Server System User Guide ix
For this Information or
Software
Use this Document or Software
Hardware (peripheral
boards, adapter cards)
and operating systems
that have been tested with
this product
For software to manage
your Intel
®
server
For diagnostics test
software
Tested HardwareOperating Systems List
Found at: http://support.intel.com/support/motherboards/server/
S5000VCL/
®
Intel
System Management
Found at: http://support.intel.com/support/motherboards/server/
S5000VCL/
Diagnostics
Found at: http://support.intel.com/support/motherboards/server/
S5000VCL/
x Server System User Guide
Contents
Safety Information .....................................................................................................iii
Important Safety Instructions ................................................................................................ iii
Wichtige Sicherheitshinweise ............................................................................................... iii
Consignes de sécurité .......................................................................................................... iii
Instrucciones de seguridad importantes ............................................................................... iii
Warnings ................................................................................................................................v
Preface .......................................................................................................................vii
About this Manual ................................................................................................................ vii
Manual Organization ............................................................................................................vii
Product Contents ................................................................................................................. vii
Server System References ................................................................................................... ix
Chapter 1: Server System Features ..........................................................................1
Chassis Component Identification .........................................................................................4
Configuration Jumpers .........................................................................................................13
RAID Support .......................................................................................................................14
Rack-Mounted Systems .......................................................................................................14
Hardware Requirements ......................................................................................................15
®
Intel
Server System Contents ....................................................................................viii
Front Control Panel (SR1530CL/SR1530CLR) .............................................................4
Front Control Panel (SR1530HCL/SR1530HCLS and SR1530HCLR/SR1530HCLSR) 5
System Rear ..................................................................................................................6
Peripheral Devices ........................................................................................................7
Internal Components ...................................................................................................10
Processor ....................................................................................................................15
Memory ........................................................................................................................15
Chapter 2: Server Utilities ........................................................................................17
Using the BIOS Setup Utility ................................................................................................17
Starting Setup ..............................................................................................................17
If You Cannot Access Setup ........................................................................................17
Setup Menus ...............................................................................................................17
Upgrading the BIOS .............................................................................................................19
Preparing for the Upgrade ...........................................................................................19
Upgrading the BIOS ....................................................................................................20
Clearing the Password .........................................................................................................21
Clearing the CMOS ..............................................................................................................22
Forcing a BMC Update ........................................................................................................23
Chapter 3: Hardware Installations and Upgrades .................................................25
Server System User Guide xi
Before You Begin ................................................................................................................ 25
Tools and Supplies Needed ........................................................................................ 25
System References ..................................................................................................... 25
Removing and Installing the Front Bezel ............................................................................. 26
Removing the Front Bezel ........................................................................................... 26
Installing the Front Bezel ............................................................................................. 27
Removing and Installing the Server Cover .......................................................................... 28
Removing the Server System Cover ........................................................................... 28
Installing the Server System Cover ............................................................................. 30
Removing and Installing the Processor Air Duct ................................................................. 32
Removing the Processor Air Duct ............................................................................... 32
Installing the Processor Air Duct ................................................................................. 33
Installing and Removing Memory ........................................................................................ 35
Installing DIMMs .......................................................................................................... 35
Removing DIMMs ........................................................................................................ 37
Installing or Replacing the Processor .................................................................................. 37
Installing the Processor ............................................................................................... 37
Installing the Heat Sink ............................................................................................... 40
Removing the Heat Sink and Processor ..................................................................... 41
Installing and Removing a Hard Drive (SR1530CL/SR1530CLR) ....................................... 42
Installing a Hard Disk Drive (SR1530CL/SR1530CLR) ............................................... 42
Removing a Hard Disk Drive (SR1530CL/SR1530CLR) ............................................. 46
Installing and Removing a Hot-Swap SAS/SATA Drive (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR) .................................................................................. 47
Installing a Hot-Swap SAS/SATA Drive (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) .............................................................................................. 48
Removing a Hot-Swap SAS/SATA Drive (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR) ...................................................................... 50
Installing or Removing a Slimline Optical Drive ................................................................... 51
Installing a Slimline Optical Drive (SR1530CL/SR1530CLR) ...................................... 51
Installing a Slimline Optical Drive (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) .............................................................................................. 55
Removing a Slimline Optical Drive (SR1530CL/SR1530CLR) .................................... 58
Removing a Slimline Optical Drive (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) .............................................................................................. 61
Installing and Removing the PCI Riser Assembly ............................................................... 63
Removing the PCI Riser Assembly ............................................................................. 63
Installing the PCI Riser Assembly ............................................................................... 64
Installing or Replacing a PCI Riser Card ............................................................................. 65
Installing a PCI Riser Card .......................................................................................... 65
Replacing a PCI Riser Card ........................................................................................ 66
Installing or Removing a PCI Add-in Card ........................................................................... 67
Installing a PCI Add-in Card ........................................................................................ 67
Removing a PCI Add-in Card ...................................................................................... 68
xii Server System User Guide
Installing and Removing the Server Board ..........................................................................69
Installing the Server Board ..........................................................................................69
Removing the Server Board ........................................................................................71
Replacing the CMOS Battery ...............................................................................................72
Replacing the Power Supply (SR1530CL/SR1530CLR) .....................................................73
Replacing the Power Supply (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) ..........................................................................................................78
Replacing the Front Panel Board (SR1530CL/SR1530CLR) ..............................................83
Replacing the Front Panel Board (SR1530HCL/SR1530HCLR) .........................................85
Replacing a System Blower .................................................................................................88
Replacing the System Blowers (SR1530CL/SR1530CLR) ..........................................88
Replacing a System Blower (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) ..............................................................................................91
Replacing the PCI Cooling Fan (SR1530CL/SR1530CLR) .........................................93
Installing and Removing the Rack Handles .........................................................................95
Installing the Rack Handles .........................................................................................95
Removing the Rack Handles .......................................................................................96
Appendix A: Technical Reference ..........................................................................97
Cable Routing ......................................................................................................................97
Power Cable Routing (SR1530CL/SR1530CLR) ........................................................98
Power Cable Routing (SR1530HCL/SR1530HCLS and SR1530HCLR/SR1530HCLSR)
99
Data Cable Routing (SR1530CL/SR1530CLR) .........................................................100
Data Cable Routing (SR1530HCL/SR1530HCLS and SR1530HCLR/SR1530HCLSR) .
101
400-W Single Power Supply Input Voltages ......................................................................102
400-W Single Power Supply Output Voltages ...................................................................102
System Environmental Specifications ................................................................................103
Appendix B: Troubleshooting ...............................................................................105
Resetting the System .........................................................................................................105
Problems following Initial System Installation ....................................................................106
First Steps Checklist ..................................................................................................106
Hardware Diagnostic Testing .............................................................................................107
Verifying Proper Operation of Key System Lights .....................................................107
Confirming Loading of the Operating System ............................................................107
Specific Problems and Corrective Actions .........................................................................108
Power Light Does Not Light .......................................................................................108
No Characters Appear on Screen .............................................................................109
Characters Are Distorted or Incorrect ........................................................................110
System Cooling Fans Do Not Rotate Properly ..........................................................110
Drive Activity Light Does Not Light ............................................................................110
CD-ROM Drive or DVD-ROM Drive Activity Light Does Not Light .............................111
Cannot Connect to a Server ......................................................................................111
Server System User Guide xiii
Problems with Network ............................................................................................. 111
System Boots when Installing PCI Card ................................................................... 112
Problems with Newly Installed Application Software ................................................. 112
Problems with Application Software that Ran Correctly Earlier ................................ 113
Devices are not Recognized under Device Manager (Microsoft Windows* Operating Sys-
tem) ............................................................................................................... 113
Hard Drive(s) are not Recognized ............................................................................. 113
Bootable CD-ROM Disk Is Not Detected .................................................................. 114
LED Information ........................................................................................................ 114
BIOS POST Beep Codes .......................................................................................... 116
Appendix C: Getting Help ......................................................................................117
World Wide Web ............................................................................................................... 117
Telephone ......................................................................................................................... 117
Appendix D: Safety Information ............................................................................121
English ............................................................................................................................... 121
Server Safety Information ......................................................................................... 121
Safety Warnings and Cautions .................................................................................. 121
Intended Application Uses ........................................................................................ 122
Site Selection ............................................................................................................ 122
Equipment Handling Practices .................................................................................. 122
Power and Electrical Warnings ................................................................................. 123
System Access Warnings ......................................................................................... 124
Rack Mount Warnings ............................................................................................... 124
Electrostatic Discharge (ESD) ................................................................................... 125
Other Hazards ........................................................................................................... 125
Deutsch ............................................................................................................................. 126
Sicherheitshinweise für den Server ........................................................................... 126
Sicherheitshinweise und Vorsichtsmaßnahmen ....................................................... 126
Zielbenutzer der Anwendung .................................................................................... 127
Standortauswahl ....................................................................................................... 127
Handhabung von Geräten ......................................................................................... 127
Warnungen zu Netzspannung und Elektrizität .......................................................... 128
Warnhinweise für den Systemzugang ....................................................................... 129
Warnhinweise für Racks ........................................................................................... 129
Elektrostatische Entladungen (ESD) ......................................................................... 130
Andere Gefahren ....................................................................................................... 130
Français ............................................................................................................................. 131
Consignes de securite sur le serveur ........................................................................ 131
Séurité: avertissements et mises en garde ............................................................... 131
Domaines d’utilisation prévus ................................................................................... 132
Sélection d’un emplacement ..................................................................................... 132
Pratiques de manipulation de l’équipement .............................................................. 133
Alimentation et avertissements en matiére d’électricité ............................................ 133
xiv Server System User Guide
Avertissements sur le cordon d’alimentation .............................................................134
Avertissements sur l’accés au systéme .....................................................................134
Avertissements sur le montage en rack ....................................................................135
Décharges électrostatiques (ESD) ............................................................................136
Autres risques ............................................................................................................136
Périphériques laser ....................................................................................................137
Español ..............................................................................................................................137
Información de seguridad del servidor ......................................................................137
Advertencias y precauciones sobre seguridad ..........................................................137
Aplicaciones y usos previstos ....................................................................................138
Seleccién de la ubicación ..........................................................................................138
Manipulacién del equipo ............................................................................................139
Advertencias de alimentacién y eléctricas .................................................................139
Advertencias sobre el cable de alimentación ............................................................139
Advertencias el acceso al sistema ............................................................................140
Advertencias sobre el montaje en bastidor ...............................................................142
Descarga electrostática (ESD) ..................................................................................142
Otros riesgos .............................................................................................................143
Appendix E: Installation / Assembly Safety Instructions ...................................145
English ...............................................................................................................................145
Deutsch ..............................................................................................................................147
Français .............................................................................................................................149
Español ..............................................................................................................................151
Italiano ...............................................................................................................................153
Appendix F: Regulatory and Compliance Information ....................................... 157
Product Regulatory Compliance ........................................................................................157
Product Safety Compliance .......................................................................................157
Product Regulatory Compliance References ............................................................158
Electromagnetic Compatibility Notices ..............................................................................161
FCC Verification Statement (USA) ............................................................................161
Industry Canada (ICES-003) .....................................................................................162
Europe (CE Declaration of Conformity) .....................................................................162
VCCI (Japan) .............................................................................................................162
BSMI (Taiwan) ...........................................................................................................162
Korean Compliance (RRL) ........................................................................................163
Product Ecology Compliance ....................................................................................163
Other Markings ..........................................................................................................166
Regulated Specified Components .............................................................................167
End-of-Life / Product Recycling .........................................................................................168
Appendix G: Warranty ............................................................................................169
Limited Warranty for Intel® Chassis Subassembly Products ............................................169
Server System User Guide xv
xvi Server System User Guide
List of Tables
Table 1. Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS and Intel Server Sys-
tem SR1530CLR / SR1530HCLR / SR1530HCLSR Feature Summary ...................................2
Table 2. NIC LED Descriptions .................................................................................................6
Table 3. Setup Menu Key Use ................................................................................................18
Table 4. Power Supply Output Capability ..............................................................................102
Table 5. System Environmental Specifications .....................................................................103
Table 6. Resetting the System ..............................................................................................105
Table 7. LED Information ......................................................................................................114
Table 8. System Status LED Color and Blink Codes ............................................................115
Table 9. POST Error Beep Codes .........................................................................................116
Table 10. Error Beep Codes Generated by Intel
Table 11. Product Regulatory Compliance Markings ............................................................158
Table 12. Product Ecology Compliance Markings .................................................................164
Table 13. Other Markings ......................................................................................................166
®
Remote Management Module ................116
Server System User Guide xvii
xviii Server System User Guide
List of Figures
Figure 1. Intel® Server System SR1530CL/SR1530CLR ......................................................... 1
Figure 2. Intel® Server System SR1530HCL / SR1530HCLS and SR1530HCLR /
SR1530HCLSR ......................................................................................................................... 1
Figure 3. Front Controls and LEDs (SR1530CL/SR1530CLR) ................................................. 4
Figure 4. Front Controls and LEDs (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)........................................................................................................................ 5
Figure 5. Back Panel Connectors.............................................................................................. 6
Figure 6. Optional Peripherals (SR1530CL/SR1530CLR) ........................................................ 7
Figure 7. Optional Peripherals (SR1530HCL/SR1530HCLS and SR1530HCLR/SR1530HCLSR)
8
Figure 8. Chassis Components (SR1530CL/SR1530CLR)..................................................... 10
Figure 9. Chassis Components (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 11
Figure 10. Server Board Connector and Component Locations ............................................. 12
Figure 11. Configuration Jumpers........................................................................................... 13
Figure 12. Identifying DIMM Sockets ...................................................................................... 15
Figure 13. Clear Password Jumper......................................................................................... 21
Figure 14. Clear CMOS Jumper.............................................................................................. 22
Figure 15. BMC Force Update Jumper ................................................................................... 23
Figure 16. Removing the Front Bezel (SR1530CL/SR1530CLR) ........................................... 26
Figure 17. Removing the Front Bezel (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 27
Figure 18. Installing the Front Bezel (SR1530CL/SR1530CLR) ............................................. 27
Figure 19. Installing the Front Bezel (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 28
Figure 20. Removing the Server System Cover (SR1530CL/SR1530CLR)............................ 29
Figure 21. Removing the Server System Cover (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 30
Figure 22. Installing the Server System Cover (SR1530CL/SR1530CLR).............................. 31
Figure 23. Installing the Server System Cover (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 31
Figure 24. Removing the Processor Air Duct (SR1530CL/SR1530CLR)................................ 32
Figure 25. Removing the Processor Air Duct (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 33
Figure 26. Installing the Processor Air Duct (SR1530CL/SR1530CLR).................................. 34
Figure 27. Installing the Processor Air Duct (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 34
Figure 28. Installing the Memory............................................................................................. 36
Figure 29. Lifting the Processor Socket Handle...................................................................... 38
Figure 30. Opening the Load Plate ......................................................................................... 38
Figure 31. Removing the Shipping Cover ............................................................................... 39
Figure 32. Installing the Processor.......................................................................................... 39
Server System User Guide xix
Figure 33. Removing the Protective Socket Cover................................................................. 40
Figure 34. Installing the Heat Sink.......................................................................................... 41
Figure 35. Locating Drive Positions (SR1530CL/SR1530CLR).............................................. 43
Figure 36. Removing Drive Carrier from Server System (SR1530CL/SR1530CLR) .............. 43
Figure 37. Installing Drive into Drive Carrier (SR1530CL/SR1530CLR)................................. 44
Figure 38. Install Drive Assemby into Server System (SR1530CL/SR1530CLR)................... 44
Figure 39. Connecting Hard Drive Power and Data Cables (SR1530CL/SR1530CLR) ......... 45
Figure 40. Removing Drive Carrier from the Server System (SR1530CL/SR1530CLR)........ 46
Figure 41. Install Drive Assemby into the Server System (SR1530CL/SR1530CLR)............. 47
Figure 42. Locating Drive Positions (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) ..................................................................................................................... 48
Figure 43. Removing the Drive Carrier (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) ..................................................................................................................... 48
Figure 44. Installing Drive into Drive Carrier (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) ..................................................................................................................... 49
Figure 45. Installing Drive Assembly into Server System (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR).............................................................................................. 50
Figure 46. Lifting PCI Cooling Fan from Mounting Pegs (SR1530CL/SR1530CLR) .............. 52
Figure 47. Removing the Knockout in Bezel for Optical Drive Opening (SR1530CL/SR1530CLR)
52
Figure 48. Attaching the Interposer Board (SR1530CL/SR1530CLR).................................... 53
Figure 49. Attaching the Brackets to the Optical Drive (SR1530CL/SR1530CLR)................. 53
Figure 50. Installing the Optical Drive into the Server System (SR1530CL/SR1530CLR) ..... 54
Figure 51. Installing PCI Cooling Fan (SR1530CL/SR1530CLR)........................................... 54
Figure 52. Attaching the Interposer Board (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR) ..................................................................................................................... 55
Figure 53. Attaching the Bracket to the Optical Drive (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR).............................................................................................. 56
Figure 54. Installing the Optical Drive into the System (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR).............................................................................................. 56
Figure 55. Routing Data and Power Cables to Optical Drive (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR).............................................................................................. 57
Figure 56. Lifting PCI Cooling Fan from Mounting Pegs (SR1530CL/SR1530CLR) .............. 58
Figure 57. Removing the Optical Drive from the Server System (SR1530CL/SR1530CLR).. 59
Figure 58. Removing the Brackets from the Optical Drive Bracket (SR1530CL/SR1530CLR) 59
Figure 59. Removing the Interposer Board from the Optical Drive (SR1530CL/SR1530CLR) 60
Figure 60. Installing the PCI Cooling Fan onto Mounting Pegs (SR1530CL/SR1530CLR).... 60
Figure 61. Removing Optical Drive from Server System (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR).............................................................................................. 61
Figure 62. Removing Bracket from Optical Drive Bracket (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR).............................................................................................. 62
Figure 63. Removing Interposer Board fromOptical Drive (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR).............................................................................................. 62
Figure 64. Removing PCI Riser Assembly from the Server System....................................... 63
Figure 65. Installing PCI Riser Assembly into the Server System .......................................... 64
Figure 66. Installing Riser Card onto Riser Assembly ............................................................ 65
Figure 67. Removing Riser Card from Riser Assembly .......................................................... 66
xx Server System User Guide
Figure 68. Installing an Add-In Card........................................................................................ 68
Figure 69. Removing an Add-In Card...................................................................................... 69
Figure 70. Installing the Server Board..................................................................................... 70
Figure 71. Removing the Server Board................................................................................... 71
Figure 72. Replacing the CMOS Battery................................................................................. 73
Figure 73. Disconnecting Power Cables (SR1530CL/SR1530CLR)....................................... 74
Figure 74. Removing Power Supply from the Server System (SR1530CL/SR1530CLR)....... 75
Figure 75. Installing Power Supply into the Server System (SR1530CL/SR1530CLR) .......... 76
Figure 76. Connecting Power Cables (SR1530CL/SR1530CLR) ........................................... 77
Figure 77. Disconnecting Power Cables (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 79
Figure 78. Removing Power Supply from Server System (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR) .............................................................................................. 80
Figure 79. Installing Power Supply into Server System (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR) .............................................................................................. 81
Figure 80. Connecting Power Cables (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 82
Figure 81. Removing Front Panel Board from Server System (SR1530CL/SR1530CLR)...... 83
Figure 82. Installing Front Panel Board in Server System (SR1530CL/SR1530CLR)............ 84
Figure 83. Removing Front Panel Board from Server System (SR1530HCL/SR1530HCLR). 85
Figure 84. Removing Light Pipes from Front Panel Board...................................................... 86
Figure 85. Installing Light Pipes on Replacement Front Panel Board..................................... 86
Figure 86. Installing Front Panel Board into Server System (SR1530HCL/SR1530HCLR).... 87
Figure 87. Disconnecting System Blower Cables (SR1530CL/SR1530CLR) ......................... 88
Figure 88. Removing Blower Bracket with System Blowers from Server System (SR1530CL/
SR1530CLR)........................................................................................................................... 89
Figure 89. Removing System Blower from Blower Bracket (SR1530CL/SR1530CLR) .......... 90
Figure 90. Connecting System Blower Cables (SR1530CL/SR1530CLR).............................. 91
Figure 91. Removing System Blower from Server System (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR) .............................................................................................. 92
Figure 92. Installing System Blower in Server System (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR) .............................................................................................. 93
Figure 93. Disconnecting the PCI Cooling Fan (SR1530CL/SR1530CLR)............................. 94
Figure 94. Removing the PCI Cooling Fan (SR1530CL/SR1530CLR) ................................... 94
Figure 95. Installing the Rack Handle ..................................................................................... 95
Figure 96. Removing the Rack Handle ................................................................................... 96
Figure 97. Power Cable Routing (SR1530CL/SR1530CLR)................................................... 98
Figure 98. Power Cable Routing (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR)...................................................................................................................... 99
Figure 99. Data Cable Routing (SR1530CL/SR1530CLR).................................................... 100
Figure 100. Data Cable Routing (SR1530HCL/SR1530HCLS and SR1530HCLR/
SR1530HCLSR).................................................................................................................... 101
Server System User Guide xxi
xxii Server System User Guide
1 Server System Features
This chapter briefly describes the main features of the server system. This chapter
provides a illustrations of the product, a list of the server system features, and diagrams
showing the location of important components and connections on the serv er sy s t em .
Figure 1. Intel® Server System SR1530CL/SR1530CLR
Figure 2. Intel® Server System SR1530HCL / SR1530HCLS and
SR1530HCLR / SR1530HCLSR
Server System User Guide 1
Table 1 summarizes the features of the server system.
®
Table 1. Intel
Server System SR1530CL / SR1530HCL / SR1530HCLS and
Intel Server System SR1530CLR / SR1530HCLR / SR1530HCLSR Feature
Summary
Feature Description
Dimensions (SR1530CL/
SR1530CLR)
• 1.69 inches high (4.29 centimeters)
• 17 inches wide (43.18 centimeters)
• 20 inches deep (50.80 centimeters)
• 22 pounds
Dimensions (SR1530HCL/
SR1530HCLS and
SR1530HCLR/
SR1530HCLSR)
• 1.70 inches high (4.325 centimeters)
• 16.92 inches wide (43.0 centimeters)
• 25.51 inches deep (64.80 centimeters), excluding hard drive
carrier, front control panel bezel, rack handles, and front bezel
• 23 pounds
Server Board One Intel
Processor Support for up to two Dual-Core Intel
series or 5300 (80-W versions only) series with a 1333 or 1066
MHz front side bus
Memory
®
Server Board S5000VCL/S5000VCLR
• Memory mirroring and memory sparing options
• Six slots supporting FBDIMM 667-MHz memory
• 12 GB maximum memory
®
Chipset Intel
Peripheral Interfaces External connections:
5000V Chipset, consisting of
®
• Intel
• Intel
5000V Memory Controller Hub
®
6321ESB I/O Controller Hub
• Stacked PS/2 ports for keyboard and mouse
• DB9 Serial A port
• Two NIC connectors for 10/100/1000 Mb connections
• Two USB 2.0 ports
Internal connections:
• One USB port header, which supports two USB 2.0 ports
• (SR1530CL/SR1530HCL) Six SATA-150 connectors with
integrated RAID 0/1/10 support
• (SR1530HCLS) Four SAS connectors and two SATA
connectors
• One ATA-100 connector
• SSI-compliant 24-pin control panel header
®
Xeon® processors 5100
I/O Control SMSC* SCH5027 controller
Video On-board ATI* RAGE video controller with 16 MB SDRAM
LAN
• Intel
• Intel
2 Server System User Guide
®
10/100/1000 82573E Gigabit Ethernet Controller
®
10/100/1000 82541PI Gigabit Ethernet Controller
Table 1. Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS and
Intel Server System SR1530CLR / SR1530HCLR / SR1530HCLSR Feature
Summary
Feature Description
Expansion Capabilities
Hard Drives • ATA-100 support: one IDE channel
• Supports one full-height PCI-X* card and one low-profile PCIe*
card
• SATA support
Peripherals
Front control panel LEDs
and buttons
• Slimline bay for IDE optical drive (optional)
• NIC1 Activity
• NIC2 Activity
• Power / Sleep
• System Status
• Hard Drive Activity
Power Supply One 400-watt power supply module
Fans • Non-redundant fans:
– (SR1530CL/SR1530CLR) One PCI cooling fan
– Two system blowers
USB
• One front panel USB port
• One internal USB header providing two USB ports
System Management Intel
®
System Management Software
Server System User Guide 3
Chassis Component Identification
This section helps you identify the components of your server system. If you are near the
system, you can also use the Quick Reference Label provided on the inside of the chassis
cover to assist in identifying components.
Front Control Panel (SR1530CL/SR1530CLR)
The front control panel of the Intel® Server System SR1530CL/SR1530CLR includes the
following buttons and LEDs.
CBA D
A. USB Port E. Hard Disk Drive Activity LED
B. Power Button F. NIC1 LED
C. System Status LED G. NIC2 LED
D. System Power LED
Figure 3. Front Controls and LEDs (SR1530CL/SR1530CLR)
F
E
G
AF001182
4 Server System User Guide
Front Control Panel (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR)
The front control panel of the Intel® Server System SR1530HCL / SR1530HCLS and
SR1530HCLR / SR1530HCLSR includes the following buttons and LEDs.
B
E
A C D
G F
AF001610
A. NIC1 LED E. Hard Disk Drive Activity LED
B. NIC2 LED F. USB Port
C. System Power LED G. Power Button
D. System Status LED
Figure 4. Front Controls and LEDs (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR)
Server System User Guide 5
System Rear
CBA D
F
E G H
A. AC Power Connector F. USB 0-1
B. Mouse Socket G. Serial Port A
C. PCI Express* Slot H. Video
D. Full-height PCI-X Slot I. NIC 1 (10/100/1000 Mb)
E. Keyboard Socket J. NIC 2 (10/100/1000 Mb)
I
J
AF001183
Figure 5. Back Panel Connectors
The NIC LEDs at the right and left of each NIC provide the following information.
Table 2. NIC LED Descriptions
LED LED State Description
Left Off No network connection
Solid Amber Network connection in place
Blinking Amber Transmit/receive activity
Right Off 10 Mbps connection (if left LED is on or blinking)
Solid Amber 100 Mbps connection
Solid Green 1000 Mbps connection
6 Server System User Guide
Peripheral Devices
The server system provides locations and hardware for installing hard drives, CD-ROM
drive, or DVD-ROM drive. The drives must be purchased separately. The following figure
shows the available options.
A
.
A. Slimline Optical Drive Bay
B. Hard Disk Drive Bay HDD0 (located under the slimline optical drive bay)
C. Hard Disk Drive Bay HDD1
B
C
AF001184
Figure 6. Optional Peripherals (SR1530CL/SR1530CLR)
Server System User Guide 7
A
B
AF001611
A. Slimline Optical Drive Bay (CD/DVD)
B. Hard Disk Drive Bay (3)
Figure 7. Optional Peripherals (SR1530HCL/SR1530HCLS and
SR1530HCLR/SR1530HCLSR)
8 Server System User Guide
Loading...