Intel SC5250-E, SE7210TP1-E, SR1325TP1-E, SC5200 User Manual
Intel® Entry Server Board SE7210TP1-E,
Intel Server Platform SR1325TP1-E, Intel®
Server Chassis SC5200 and SC5250-E
Configuration Guide and Spares/Parts List
A reference guide to assist customers in ordering the necessary components to configure
the Server Board SE7210TP1-E, Server Platform SR1325TP1-E, Server Chassis SC5200 and
SC 5250-E Products
Rev 1.0
Change History:
10/23/2003 Rev 0.5 First revision
11/13/2003 Rev 0.7 Additional
11/27/2003 Rev 0.8 Formatting edits and updates; added available silver accessory information
2/6/2004 Rev 1.0 Minor format updates and removed all silver references in document
SERVER BOARD SE7210TP1-E-E & SERVER CHASSIS SC5100 CONFIGURATION GUIDE
information on spares/accessories and SR1325TP1 product
2
Disclaimer
Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel
or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and
Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied
warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are
not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and
product descriptions at any time, without notice.
*Other brands and names may be claimed as the property of others. Intel, Pentium, Itanium, and Xeon are trademarks
or registered trademarks of Intel Corporation.
All products, dates, and figures are preliminary and are subject to change without any notice.
Copyright © Intel Corporation 2002/2003.
Contents
Contents............................................................................................................ 2
SE7210TP1-E Product Family Overview ........................................................3
SE7210TP1-E Board Configuration Overview ................................................3
Intel Server Platform SR1325TP1 Configuration Overview............................ 4
SE7210TP1-E Chassis Offerings ....................................................................5
SE7210TP1-E Baseboard Ordering Information............................................. 5
Intel Server Platform SR1325TP1 Ordering Information ................................6
Intel® RAID Controller Options for Server Board SE7210TP1-E................... 6
Server Chassis SC5200 BRP (BRP) Ordering Information............................7
Server Chassis SC5250-E Ordering Information ............................................7
Spares and Accessories: ................................................................................. 8
SE7210TP1-E Board Spares and Accessories (N/A)....................... 8
Integrated Platform SR1325TP1 Spares and Accessories............... 8
SC5200 Production Chassis Spares and Accessories ..................... 9
SC5250-E Production Chassis Spares and Accessories ...............10
SE7210TP1-E-E CONFIGURATION GUIDE
3
Production Configurations
SE7210TP1-E Product Family Overview
The Intel SE7210TP1-E product family consists of four production board skus and an integrated 1U sku known
as the Intel Server Platform SR1325TP1-E. This configuration guide describes the following production board
and chassis skus which are being offered as part of the SE7210TP1-E product family;
a) SE7210TP1 – Boxed board (base sku)
b) SE7210TP1SCSI – Boxed board with an additional integrated Adaptec single channel U320 controller
c) BTPBB – OEM 10-pack (base sku)
d) BTPSCSIBB – OEM board with an additional integrated Adaptec single channel U320 controller
e) SR1325TP1 – Integrated 1U server platform (See SR1325TP1-E Configuration Overview Section
below for more information)
SE7210TP1-E Product Family Board Configuration Overview
This section contains information needed to order and configure a production Server Board SE7210TP1-E with
a Server Chassis SC5200, SC5250-E or a third party pedestal chassis.
1. The SE7210TP1-E product family is offered in four production board configurations;
a) SE7210TP1 – Boxed board (base configuration: Parallel ATA and Serial ATA device support)
b) SE7210TP1SCSI – Boxed board base configuration with an additional integrated Adaptec single
channel U320 controller
c) BTPBB – OEM 10-pack (10-pack of boards; base configuration)
d) BTPSCSIBB – OEM 10-pack (10-pack of boards; base configuration with an additional integrated
Adaptec single channel U320 controller
2. The production Boxed Server Board SE7210TP1 contains the following:
a. One Intel
b. Quick Start User Guide
c. 2 CD-ROMs with Intel Server Management 5.8 software**, software drivers, configuration tools,
and technical product information
d. Two Serial ATA cables
e. One floppy-drive cable
f. One ATA/66/100 hard-drive cable
g. ATX 2.01–compliant I/O shield
h. Configuration label, stickers and back-panel label
3. The production Boxed Server Board SE7210TP1SCSI contains the following in addition to the boxed
SE7210TP1 listed above in section 2:
• One U320 SCSI cable
Entry Server Board SE7210TP1 (base configuration)
4. The Intel Entry Server Board SE7210TP1-E has been validated with the following Intel chassis:
• Intel Server Chassis SC5200 (Base Redundant Power)
• Intel Server Chassis SC5250-E
5. The Intel Entry Server Board SE7210TP1-E is also validated with a number of third party pedestal and highdensity chassis. Please see the SE7210TP1-E section of support.intel.com (post launch) and the product
snapshot updates (pre-launch) for the latest reference chassis list and information.
SE7210TP1-E-E CONFIGURATION GUIDE
4
Intel Server Platform SR1325TP1-E Configuration Overview
This section contains ordering and configuration information for the Intel Server Platform SR1325TP1-E. This is
an Intel designed and integrated 1U high density platform consisting of an SE7210TP1-E family server board
and an Intel 1U enclosure which is designed only to be supported and offered to customers as the Intel Server
Platform SR1325TP1 product sku.
Note: Intel is not offering a stand alone SR1325-E chassis sku for the SE7210TP1-E product family.
Customers configuring with third party high density chassis solutions should order one of the four SE7210TP1-E
board configurations described in the previous section (See section 1 of the SE7210TP1-E Board Configuration
Overview)
1. The SR1325TP1-E integrated server platform contains five fans and a 250W Power Supply. The Intel
Server Platform SR1325TP1-E includes:
• 1U SR7210TP1-E server board
• 1U SR1325-E chassis with 250W Power Supply
• Chassis cooling fans and ducting
• 1U Intel designed heatsink and heatsink mounting plate
• CD cable
• Floppy cable
• CD and floppy filler panel
• Intel cosmetic bezel
• North American power cord (varies by sku – see ordering tables below)
• Front panel board and cable (34-pin baseboard header to front panel)
• One PCI riser card assembly (one PCI-X capable slot)
• Intrusion switch
• Floppy/CD bracket assembly
• HDD Carrier Trays (2)
• I/O gasket
• Fixed drive bay supporting two cabled IDE, SATA or SCSI HDD’s (SCSI cable not included)
Note: A KDK Accessory Kit ships with the Server Platform SR1325TP1-E and includes the following
additional items. (This kit is included with the Server Platform SR1325TP1-E)
¾ 2 SATA Cables
¾ 1 IDE Cable
¾ Flex circuit CD interface board to floppy drive cable
¾ CD Interface board and mounting screws
¾ Floppy mounting screws
¾ Boxed board configuration label
¾ Rack handles (2) and screws
¾ Cable ties
¾ Quick start guide
¾ Appropriate additional screws
¾ 2 CD-ROMs
o Intel Server Management 5.8 software,
o Resource CD with software drivers, utilities software, configuration tools, and technical
information
• Rack rails are not
• Support for 3
included but are available as a separate accessory item (see ordering tables below)
rd
HDD (SATA or IDE) via an accessory kit upgrade (see ordering tables below)
SE7210TP1-E-E CONFIGURATION GUIDE
Loading...