Intel RSP3TD160, RSP3MD088, RSP3DD080, RSP3WD080 Hardware User's Manual

Download

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080

Hardware User Guide

A document providing an overview of product features, specification data, and hardware installation instructions

Rev 1.0

July 2017

Intel® Server Products and Solutions

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Jul 2017

1.0

Initial release

Document Revision History

Date Published Revision Revision Change Description

iii

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Disclaimers

Intel technologies’ features and benefits depend on system configuration and may require enabled hardware, software, or service activation. Performance varies depending on system configuration. No computer system can be absolutely secure. Check with your system manufacturer or retailer or learn more at Intel.com.

No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.

Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

The products and services described may contain defects or errors known as errata which may cause deviations from published specifications. Current characterized errata are available on request.

You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject matter disclosed herein.

Intel, the Intel logo, are trademarks of Intel Corporation in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

重要安全指导

Safety Information

Important Safety Instructions

Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information at

https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/g23122004_safetyregulatory.pdf

Wichtige Sicherheitshinweise

Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu Intel-Serverplatinen und Servergehäusen auf der

https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/g23122004_safetyregulatory.pdf

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce document avant de suivre toute instruction. Consultez Intel Server Boards and Server Chassis Safety Information sur le site

https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/g23122004_safetyregulatory.pdf

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en

https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/g23122004_safetyregulatory.pdf

在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。和/或

https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/g23122004_safetyregulatory.pdf

上的 Intel® Server Boards and Server Chassis Safety Information（《Intel 服务器主板与服务器机箱安全信息》）。

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Warnings

Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products/components will void the UL listing and other regulatory approvals of the product and will most likely result in noncompliance with product regulations in the region(s) in which the product is sold. System power on/off: The power button DOES NOT turn off the system AC power. To remove all power from the system, you must unplug the AC power cord from the wall outlet. Make sure the AC power cord is unplugged before you open the chassis, add, or remove any components. Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result. Installing or removing jumpers: A jumper is a small plastic-encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab, take care when using needle-nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives, boards, and other parts. We recommend that you perform all procedures in this chapter only at an ESD workstation. If one is not available, provide some ESD protection by wearing an anti-static wrist strap attached to chassis ground, any unpainted metal surface on your server when handling parts. ESD and handling boards: Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their edges. After removing a board from its protective wrapper or from the server, place the board component side up on a grounded, static-free surface. Use a conductive foam pad if available but not the board wrapper. Do not slide board over any surface.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Document Title

Description

Intel® RAID Software User Guide for full

A document that provides information on RAID Card Setup and usage of supported

What to Do when Unable to Enter BIOS

Article ID: 000059999. If the Intel or OEM logo screen displays during POST, the BIOS

12 Gbps SAS or 6G SATA Data Transfer

Article ID# 000008025. A document that provides information on how and where the

1. Preface

1.1 About This Document

This document provides an overview of product features, specification data, and hardware installation instructions for the Intel® Redundant Array of Inexpensive Disks (RAID) Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080

1.2 Document Organization

This document includes the following:

Chapter 1 – Product Overview – Provides a product overview of the features set and support specifications.

Chapter 2 – General Feature Overview – Provides a brief description for the features that are common for the products covered by this guide.

Chapter 3 – Detailed Characteristics – Provides details on the characteristics for each of the products covered by this guide.

Chapter 4 – Connectivity and Drive Support – Provides description of what drives are supported by the products covered by this guide and the way to connect them.

Chapter 5 – Hardware Installation - Provides support for the installation of the product on the Intel systems

where they are supported.

Chapter 6 – Safety and Regulatory

Chapter 7 – Intel® RAID Maintenance Free Backup Unit AXXRMFBU7 – Provides details of the Intel® RAID

Maintenance-Free Backup Unit AXXRMFBU7 accessory option.

Appendix A. Glossary of Terms

Reference Documents and Online Articles

The following documents are available for download and will be useful to setting up and using the Intel RAID adapter.

featured and entry level RAID controllers

or Intel® RAID BIOS Console During Boot for Intel® Server Boards

Controller Support for Intel® RAID Controllers

RAID utility software.

http://www.intel.com/content/www/us/en/support/serverproducts/raid-products/000024126.html

entry or Intel® RAID BIOS console command prompts are not visible. To gain access to these prompts, disable the logo screen.

controller supports 12-Gbps SAS (6G SATA) data transfers.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

1.3 Product Support Collaterals

In addition to this user guide, Intel provides documentation, device driver updates, and utilities that may be necessary and/or useful for operation and support of this product. Additional product support collaterals can be downloaded from the following Intel websites:

For product documentation, go to the following Intel website:

http://www.intel.com/support/

For product device drives and other software utilities, go to the following Intel website:

https://downloadcenter.intel.com

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Table of Contents

1. Preface .................................................................................................................................................. i

1.1 About This Document ........................................................................................................................ i

1.2 Document Organization .................................................................................................................... i

1.3 Product Support Collaterals ........................................................................................................... ii

1. Product Overview .............................................................................................................................. 7

2. Intel® Tri-Mode RAID adapters General Features ....................................................................... 8

2.1 Overview ................................................................................................................................................. 8

2.2 Benefits of the SAS Interface ......................................................................................................... 8

2.3 Benefits of the NVM Express (NVMe) interface....................................................................... 8

2.4 Intel® Tri-Mode RAID Adapter Features ..................................................................................... 8

2.4.1 SAS Features ......................................................................................................................................... 8

2.4.2 SATA III Features .................................................................................................................................. 9

2.4.3 NVMe Interface Features .................................................................................................................. 9

2.4.4 Usability Features ................................................................................................................................ 9

2.4.5 Flexibility Features .............................................................................................................................. 9

2.4.6 Drive Roaming ...................................................................................................................................... 9

2.4.7 Drive Migration .................................................................................................................................. 10

2.4.8 Safety Characteristics ..................................................................................................................... 10

2.5 Intel® Tri-Mode RAID adapters Feature Set........................................................................... 11

2.6 Data Protection Features .............................................................................................................. 12

2.7 Fault Tolerance Features ............................................................................................................... 13

2.8 Array Performance Features ........................................................................................................ 13

2.9 Drive Support Limits ....................................................................................................................... 14

2.10 Over temperature protection ...................................................................................................... 14

2.11 UART Interface ................................................................................................................................. 14

2.12 Optional Intel® RAID Maintenance Free Backup Unit (RMFBU) ..................................... 15

3. Intel® Tri-Mode RAID Adapters Detailed Characteristics ....................................................... 16

3.1 Intel RAID Module RMSP3TD160F Description.................................................................. 16

3.2 Intel RAID Module RMSP3TD160F Dimensions ................................................................. 17

3.2.1 Intel RAID Adapter RMSP3TD160F Electrical, Thermal and Atmospheric Requirements. 18

3.2.2 Intel RAID Adapter RMSP3TD160F Power Consumption. .............................................. 18

3.3 Intel RAID Adapter RMSP3DD080F ......................................................................................... 19

3.4 Intel RAID Module RMSP3DD080F Dimensions................................................................. 20

3.4.1 Intel RAID Adapter RMSP3DD080F Electrical, Thermal and Atmospheric Requirements. 21

3.4.2 Intel RAID Adapter RMSP3DD080F Power Consumption. .............................................. 21

3.5 Intel RAID Adapter RMSP3MD088F ......................................................................................... 21

3.6 Intel RAID Module RMSP3MD088F Dimensions ................................................................ 22

3.6.1 Intel RAID Adapter RMSP3MD088F Electrical, Thermal and Atmospheric Requirements. 23

3.6.2 Intel RAID Adapter RMSP3MD088F Consumption. ........................................................... 24

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

3.7 Intel RAID Adapter RMSP3WD080E ......................................................................................... 24

3.8 Intel RAID Module RMSP3WD080E Dimensions ............................................................... 25

3.8.1 Intel RAID Adapter RMSP3WD080E Electrical, Thermal and Atmospheric Requirements. 27

3.8.2 Intel RAID Adapter RMSP3WD080E Consumption. ........................................................... 27

4. Conectivity and Drive Support .................................................................................................... 28

4.1 Connectivity and Drive Support ................................................................................................. 28

4.2 Connector Pinout ............................................................................................................................. 28

4.3 SAS/SATA Drive Support .............................................................................................................. 29

4.4 Intel® 12 Gb/s SAS 3.0 Expander Support ............................................................................. 30

4.4.1 SAS Expander Configuration for the Intel® RMSP3TD160F RAID Module ............... 30

4.5 NVMe Drive Support ....................................................................................................................... 32

5. Hardware Installation .................................................................................................................... 34

5.1 RAID Adapter Installation ............................................................................................................. 35

5.1.1 Requirements ..................................................................................................................................... 35

5.1.2 Packing List ......................................................................................................................................... 35

5.2 RAID Adapter Installation ............................................................................................................. 35

5.2.1 Requirements ..................................................................................................................................... 35

5.2.2 Packing List ......................................................................................................................................... 35

5.2.3 Installation Instructions ................................................................................................................. 35

6. Safety and Regulatory (Class A) .................................................................................................. 38

6.1 Product Safety Compliance ......................................................................................................... 38

6.2 Product EMC Compliance – Class A Compliance ................................................................ 38

6.3 Product Environmental Compliance ........................................................................................ 38

7. Intel® RAID Maintenance Free Backup Unit AXXRMFBU7 ..................................................... 40

7.1 Intel® RAID Maintenance Free Backup Unit AXXRMFBU7 ............................................... 40

7.2 FBU345 Specifications and Layout ........................................................................................... 41

7.2.1 Extender Cable .................................................................................................................................. 43

7.3 Intel® RAID Maintenance Free Backup Unit Installation ................................................... 43

7.4 Monitoring the Intel® RAID Maintenance Free Backup Unit ........................................... 45

7.4.1 Monitoring the RMFBU with the Human Interface Infrastructure. ............................... 45

Appendix A. Glossary ....................................................................................................................... 48

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

List of Figures

Figure 1 -

Figure 2 -

Figure 3 -

Figure 4 -

Figure 5 -

Figure 6 -

Figure 7 -

Figure 8 -

Figure 9. Intel®

Figure 10. Supported Intel® SAS expander options ..................................................................................... 30

Figure 11. RAID module RMS3PTD160 SAS port domain identification ............................................. 31

Figure 12. SAS ports for the RES3FV288 .......................................................................................................... 31

Figure 13. SAS ports for the RES3TV360 .......................................................................................................... 31

Figure 14. Connecting the AXXCBL700HDCV to the backplane ............................................................. 33

Figure 15. Connecting the AXXCBL700HDCV cable to the RAID adapter ........................................... 33

Figure 16 RAID Adapter Installation (insert adapter in slot) ..................................................................... 36

Figure 17 RAID Adapter Installation (insert riser card) ................................................................................ 37

Intel SAS RMSP3TD160F RAID adapter Layout

Intel RMSP3TD160F RAID adapter Dimensions

Intel SAS RMSP3DD080F RAID adapter Layout

Intel RMSP3DD080F RAID adapter Dimensions

Intel SAS RMSP3MD088F RAID adapter Layout

Intel RMSP3MD088F RAID adapter Dimensions

Intel SAS RMSP3WD080E RAID adapter Layout

Intel RMSP3WD080E RAID adapter Dimensions

RMSP3TD160F RAID Adapter SFF-8643 connector

.............................................................. 16

............................................................. 17

............................................................. 19

............................................................. 20

............................................................. 22

............................................................ 23

............................................................ 25

........................................................... 26

............................................ 28

Figure 18 RAID Adapter Installation (adapter installed) ............................................................................. 37

Figure 19. FBU345 layout ........................................................................................................................................ 42

Figure 20. Extender cable pinout ......................................................................................................................... 43

Figure 21 - AXXRMFBU7 Mounting Assembly ................................................................................................ 43

Figure 22 - RMFBU Assembly Installation ........................................................................................................ 44

Figure 23 - Connecting the RMFBU7 to the RAID adapter ......................................................................... 44

Figure 24. HII Dashboard view screen ................................................................................................................ 45

Figure 25. HII Hardware Components screen ................................................................................................. 46

Figure 26. HII Battery Management screen ...................................................................................................... 46

List of Tables

Table 1. Intel® Tri-Mode RAID adapter comparative feature set ............................................................. 11

Table 2- Data Protection Features ....................................................................................................................... 12

Table 3. Fault-tolerant features ............................................................................................................................ 13

Table 4. Array performance features .................................................................................................................. 13

Table 5. SAS/SATA drive support limits ............................................................................................................ 14

Table 6- UART Connector Pinout ......................................................................................................................... 14

Table 7. SFF-8643 connector pinout .................................................................................................................. 29

Table 8. FBU345 specifications ............................................................................................................................. 41

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

1. Product Overview

The Intel® RAID adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 are are part of the new family of Intel® RAID adapters. This new family of Tri-Mode RAID adapters allow for creating RAID configurations with SAS drives, SATA drives, or NVMe drives. The Intel® RAID adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 are high-performance, intelligent adapters with RAID control capability. The Tri-Mode RAID Adapters provide reliability, highperformance, and fault-tolerant drive subsystem management. The Tri-Mode RAID adapters are based on the LSI SAS IC technology and proven MegaRAID technology. Intel offers a family of Tri-Mode RAID adapters that address the needs for internal connectivity solutions as well as low and high port count:

• RSP3TD160F – Full featured tri-mode RAID adapter with 16 internal ports

• RSP3MD088F– Full featured tri-mode RAID adapter with 8 internal and 8 external ports

• RSP3DD080F– Full featured tri-mode RAID adapter with 8 internal ports

• RSP3WD080E– Entry level tri-mode RAID adapter with 8 internal ports

NOTE: The Intel Tri-Mode adapters are designed to work on systems configured for optimized UEFI boot mode. There is no built-in configuration utility for these adapters when the system is configured for legacy boot mode. Some adapters like RSP3WD080E will not work when the system they are installed on is configured for legacy boot mode.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

2. Intel® Tri-Mode RAID adapters General Features

2.1 Overview

The Intel® Tri-Mode adapters include a SAS interface and an NVMe interface. Both share the same connectors by multiplexing the data and sideband signals. As compared with the previous generation of Intel RAID adapters, the new Tri-Mode family offers increased performance by reducing latency, increasing IOPS, increasing queue depth and increasing cache memory. They also offer NVMe drive support to allow doing hardware RAID using these new technology drives.

2.2 Benefits of the SAS Interface

SAS is a serial, point-to-point, enterprise-level device interface that leverages the proven SCSI protocol set. SAS is a convergence of the advantages of SATA, SCSI, and Fiber Channel and the mainstay of the enterprise and high-end workstation storage markets.

The SAS interface uses the SCSI command set to ensure reliable data transfers while providing the connectivity and flexibility of point-to-point serial data transfers. The serial transmission of SCSI commands eliminates clock-skew challenges. The SAS interface provides improved performance, simplified cabling, smaller connectors, and lower pin count and power requirements when compared to the original parallel SCSI.

SAS adapters leverage a common electrical and physical connection interface that is compatible with Serial ATA (SATA) technology. The SAS protocols and the SATA III protocols use a common thin, 7-wire connector. The SAS/SATA III connector and cable are easier to manipulate, allow connections to smaller devices, and do not inhibit airflow. The point-to-point SATA III architecture eliminates inherent difficulties created by the legacy ATA master-slave architecture while maintaining compatibility with existing ATA firmware.

2.3 Benefits of the NVM Express (NVMe) interface

NVMe (non-volatile memory express) is a storage protocol created to accelerate the transfer of data with solid-state drives (SSDs) by utilizing multiple PCIe connections. Benefits are increased bandwidth (up to 8Gb/s per lane), lower latency, increased efficiency, lower CPU utilization with multiple long command queues and lower power.

2.4 Intel® Tri-Mode RAID Adapter Features

Next is an explanation of the features of the Intel® Tri-Mode RAID Adapters.

2.4.1 SAS Features

Characteristics of the SAS interface.

• Supports the following:

o 12 Gb/s, 6Gb/s, and 3Gb/s SAS data transfers per PHY. o SMP communicating topology management information. o SSP enabling communication with other SAS devices. o STP enabling communication with SATA devices through an attached expander.

• Provides a serial, point-to-point, enterprise-level storage interface.

• Simplifies cabling between devices.

• Provides a scalable interface that supports up to 240 devices through the use of expanders.

• Supports x2 through x8 wide ports that consist of two (2), four (4), or eight(8) PHYs within a

single port.

• Supports narrow ports consisting of a single PHY.

• Transfers data by using SCSI information units.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

2.4.2 SATA III Features

The SAS interface is compatible with SATA and it has the following characteristics.

• Supports the following:

o SATA III data transfers up to 6Gb/s. o STP data transfers up to 6Gb/s.

• Provides a serial, point-to-point storage interface.

• Simplifies cabling between devices.

• Eliminates the master-slave construction used in parallel ATA.

• Permits addressing of multiple SATA targets through an expander.

2.4.3 NVMe Interface Features

The new NVMe interface has the following characteristics.

• Supports the following:

o Data transfers of 8Gb/s per lane (32 Gb/s when 4 PCIe lanes are being used). o PCI Bus Power Management Interface Specification, Revision 1.2. o Active State Power Management, states, by placing links in a power-saving mode

during times of no link activity.

• Supports PCIe Hot Plug.

• Supports error handling.

• Provides high bandwidth per pin with low overhead and low latency.

• Supports lane reversal and polarity inversion.

2.4.4 Usability Features

The Tri-Mode RAID adapters have the next usability characteristics.

• Drives spin-up sequencing control.

• Provides one (1) LED signal to indicate link activity for all PHYs for the the drive activity LED on

the chassis.

• Supports the internal SAS sideband signal SFF-8485 (SGPIO) interface.

Note: LED signals indicate an error condition or drive activity. RAID adapters support several blink patterns for these LEDs, depending on the user configuration and storage enclosure. For information about the LED blink patterns, contact the storage enclosure manufacturer.

2.4.5 Flexibility Features

The Tri-Mode RAID adapters have the next flexibility characteristics.

• Flash ROM interface, a non-volatile static RAM (NVSRAM) interface.

• Flexible programming interface to tune I/O performance.

• Permit mixed connections to SAS targets or SATA III targets.

• Leverage-compatible connectors for SAS connections and SATA III connections.

• Permit grouping of up to eight (8) PHYs into a single SAS-wide port.

• Permit programming of the World Wide Name.

2.4.6 Drive Roaming

Drive roaming occurs when once a VD is already set up, some or all of the drives that are part of this VD are manually changed to different ports on the same adapter. When this happens, the adapter detects the RAID configuration from the configuration data on the drives. Configuration data is saved in both the NVRAM on the RAID adapter and on the drives attached to the adapter. This feature maintains the integrity of the data on each drive, even if the drives have changed their physical device ID. More information on how to use the drive roaming feature can be found on the Intel® RAID Software User Guide for full featured and entry level RAID adapters.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

2.4.7 Drive Migration

The Intel® Tri-Mode RAID adapters allow to move one VD from one adapter to another, this is called Drive Migration. In other words, Drive Migration is the transfer of a set of drives in an existing configuration from one adapter to another. In order to achieve this, there are some conditions: 1) The drives must remain on the same channel. 2) The drives must be reinstalled in the same order as in the original configuration. 3) The adapter to which the drives are migrated cannot have an existing configuration.

Note: When drives are migrated, move only the drives that make up the virtual drive (not all of the drives in a drive group), so that an NVRAM mismatch error does not occur (provided a configuration is on the destination adapter). The NVRAM mismatch error appears only when all of the drives are moved to the other adapter. Note: Drive roaming and drive migration cannot be supported at the same time.

More information on how to use the drive migration feature can be found on the Intel® RAID Software User Guide for full featured and entry level RAID adapters.

2.4.8 Safety Characteristics

All the Intel® Tri-Mode RAID adapters meet or exceed the requirements of UL flammability rating 94 V0. Each bare board is also marked with the supplier name or trademark, type, and UL flammability rating.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Feature

RSP3TD160F

RSP3MD088F

RSP3DD080F

RSP3WD080E

Broadcom* SAS3516

Broadcom* SAS3508

Broadcom* SAS3408

RAID Levels

0,1,5,6,10, 50, 60

0,1,5,10

JBOD Mode or Pass4 GB DDR4 at 2133

4 GB DDR4 at 2133

N/A

Form Factor

MD2 (PCIe card)

Drive Interface

x8 PCI Express* 3.0.

12, 6, & 3 Gbps per

Operating

Maximum ambient:

Microsoft Window*,

Drive Types

SAS, SATA, NVMe

Maximum NVMe

Maximum SAS/SATA

utilities

spares

management

2.5 Intel® Tri-Mode RAID adapters Feature Set.

The following table describes the feature set of the Intel Tri-Mode adapters

Table 1. Intel® Tri-Mode RAID adapter comparative feature set

I/O Processor

thru mode (SAS/SATA)

Cache Memory

Connectors

PCIe* Interface

Data Transfer Rates

Temperature

Operating System

PCIe* RAID On-Chip (ROC)

Yes Yes Yes

MHz

4 internal 2 internal, 2 external 2 internal 2 internal

PCIe Performance up to 8 GT/s per lane

port SAS, 6 & 3 Gbps per port SATA and 8 Gbps per lane NVMe

55°C

Linux* (SuSE*, Red Hat*) Solaris* FreeBSD*

PCIe* RAID On-Chip (ROC)

MHz

PCIe Performance up to 8 GT/s per lane

port SAS, 6 & 3 Gbps per port SATA and 8 Gbps per lane NVMe

55°C

Linux* (SuSE*, Red Hat*) Solaris* FreeBSD*

PCIe* RAID On-Chip (ROC)

MHz

PCIe Performance up to 8 GT/s per lane

port SAS, 6 & 3 Gbps per port SATA and 8 Gbps per lane NVMe

55°C

Linux* (SuSE*, Red Hat*) Solaris* FreeBSD*

PCIe* RAID On-Chip (ROC)

PCIe Performance up to 8 GT/s per lane

port SAS, 6 & 3 Gbps per port SATA and 8 Gbps per lane NVMe

55°C

Linux* (SuSE*, Red Hat*) Solaris* FreeBSD*

Yes

drives supported

devices supported***

Maximum Virtual Drives

Advanced array configuration and management

Support for global hot spares and dedicated hot

Support for userdefined strip sizes: 8, 16, 32, 64, 128, 256, 512, or 1024

Advanced array configuration and

4 2 2 2

64 64 64 63

64 (SAS/SATA/NVMe) 64 (SAS/SATA/NVMe) 64 (SAS/SATA/NVMe) 32 (SAS/SATA/NVMe)

Yes Yes Yes Yes

Yes Yes Yes Only global hot spares

Yes Yes Yes No

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

utilities offer these

• Media scan

to 100 percent)

easy upgrade.

Support for RAID

Self-Encrypting Drive SSD Cache Support

Snapshot Recovery

MTBF(hours)

Standard Warranty

3 years, AWR options

Feature

RSP3TD160F

RSP3MD088F

RSP3DD080F

RSP3WD080E

On-line Capacity Extension

Yes

Distributed Sparing

Yes

capabilities:

• Online

capacity expansion

• Online RAID

level migration

• Drive migration

• Drive roaming

• No reboot

necessary after expansion

User-specified rebuild rate (specifying the percentage of system resources to use from 0 percent

Nonvolatile random access memory (NVRAM) of 32 KB for storing RAID system configuration information; the MegaRAID SAS firmware is stored in flash ROM for

Yes Yes Yes No

Yes Yes Yes Yes

Maintenance Free Backup Unit (RMFBU). Used to save RAID Cache in event of unexpected power loss

Support

** This setting is firmware dependent. *** Devices include drives and expanders. Drives on Dual-ported backplanes count twice.

2.6 Data Protection Features

The next table describes the Data protection features of the Intel® Tri-Mode RAID adapters.

Yes

Intel accessory AXXRMFBU7 –

(Option)

Yes (SAS and SATA)

TCG Enterprise only

Table 2- Data Protection Features

Yes

Intel accessory AXXRMFBU7 –

(Option)

Yes (SAS and SATA)

TCG Enterprise only)

Yes

Intel accessory AXXRMFBU7 –

(Option)

Yes (SAS and SATA)

TCG Enterprise only

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Background Consistency Checking

Yes

Patrol Read for Media Functionality

S.M.A.R.T Support

Yes

Enclosure Management

RAID Support Before Operating

Write Back Cache with optional Intel® RAID Management Software

Hot-Spare Support, Global &

Specification

RSP3TD160F

RSP3MD088

RSP3DD080F

RSP3WD080E

Specification

RSP3TD160F

RSP3MD088F

RSP3DD080F

RSP3WD080E

lane

can accept

many as the

drive can

drive can accept

KB, 128 KB, 256 KB,

KB, 64 KB, 128

Yes Yes Yes Yes

System Loaded

Protection

Dedicated

Yes Yes Yes Yes

Yes Yes Yes No

Yes Yes Yes Yes

Yes Yes Yes Only Global

2.7 Fault Tolerance Features

The next table describes the Fault-tolerant features of the Intel® Tri-Mode RAID adapters

Table 3. Fault-tolerant features

Support for SMART

Drive failure detection Automatic Automatic Automatic Automatic

Drive rebuild using hot spares Automatic Automatic Automatic Automatic

Parity generation and checking Yes Yes Yes Yes

The Self-Monitoring Analysis and Reporting Technology (SMART) detects up to 70 percent of all predictable drive failures. In addition, SMART monitors the internal performance of all motors, heads, and drive electronics.

Yes Yes Yes Yes

2.8 Array Performance Features

The next table describes the Array performance features of the Intel® Tri-Mode RAID adapters

Table 4. Array performance features

PCI Express host data transfer rate 8GT/s per lane 8GT/s per lane 8GT/s per lane 8GT/s per lane

Drive data transfer rate 12Gb/s per lane 12Gb/s per

Maximum scatter/gather I/O 80 elements 80 elements 80 elements 80 elements

Maximum size of I/O requests 6.4 MB in 64-KB strips 6.4 MB in 64-

KB strips

Maximum queue tags per drive As many as the drive

Strip sizes 8 KB, 16 KB, 32 KB, 64

Maximum number of concurrent commands

255 255 255 ?

8 KB, 16 KB, 32

12Gb/s per lane 12Gb/s per lane

6.4 MB in 64strips

As many as the

8 KB, 16 KB, 32

6.4 MB in 64strips

As many as the

64K

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Specification

RSP3TD160F

RSP3MD088F

RSP3DD080F

RSP3WD080E

Maximum virtual drives per adapter

Maximum drive groups per adapter

Maximum virtual drives per drive group

Maximum drives per drive group

Maximum physical devices per adapter

Maximum hot spares per adapter

Maximum spans per virtual drive

8 8 8

Maximum enclosures

3**

2**

UART_TX

Gnd 3

UART_RX

1.8 V

2.9 Drive Support Limits

The next table describes the SAS/SATA drive support limits of the Intel® Tri-Mode RAID adapterts

Table 5. SAS/SATA drive support limits

** This setting is firmware dependent.

2.10 Over temperature protection

The Intel® Tri-Mode RAID adapters are designed to operate at a maximum 55 degrees Celsius with a minimum of 200 LFM air flow, this ensures the internal ROC IC will operate at less than 105 Celsius. If for any reason there’s an overheating, the internal ROC over temperature protection circuitry will operate like this:

- If the ROC reaches 110 degrees Celsius, the over temperature LED is turned on, I/O is throttled and the event “MR_EVT_CTRL_TEMP_ABOVE_OPTIMAL_RANGE” is be registered in the adapter’s log.

- if the ROC temperature goes down below 105 degrees Celsius (mostly due to I/O throttling), the over temperature LED is turned off, the event “MR_EVT_CTRL_TEMP_WITHIN_OPTIMAL_RANGE” is registered in the adapter’s log and I/O throttling is turned off.

- If the ROC reaches 116 degrees Celsius, the over temperature LED continues to lit, I/O continues to throttle, the event “MR_EVT_CTRL_TEMP_CRITICAL ” is registered in the adapter’s log, then after 10 seconds of operation the cache is flushed, pending I/Os are completed and the ROC enters into the “Montask” state, in which state all I/Os stop except through the UART debugging interface.

2.11 UART Interface

The Intel® Tri-Mode RAID adapters include a UART interface for special debugging purposes. connector debug port requires a special cable and Intel support to gather detailed ROC/IOC status. The UART connector uses the layout shown in the following table.

The default communication parameters are 115,200 b/s, 8-bit characters, no parity bit, one stop bit, and no

Table 6- UART Connector Pinout

Function

The UART

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

XON/XOFF flow control.

2.12 Optional Intel® RAID Maintenance Free Backup Unit (RMFBU)

To protect the integrity of cached data on the Intel® RAID Module during a power loss event, the Intel Tri-Mode Adapter RMSP3TD160F and RMSP3DD080F provide support for the Intel® Maintenance Free Backup Unit (RMFBU – Intel Accessory Kit AXXRMFBU7). During a power loss event, this optional accessory provides back-up power to the RAID Module, allowing the adapter to offload the data stored in the its onboard cache to its on-board non-volatile NAND flash.

Benefits of the RMFBU option include:

• Capacitor technology has a longer usable life span than batteries, and reduces maintenance and

replacement costs

• Capacitors do not have the chemical volatility of batteries which carry a risk of exothermic events

• RMFBU options do not require the comprehensive certifications required of batteries in order to import and

export them

• The RMFBU can constantly maintain the RAID volume in write back mode even when doing learn cycles

• The recharge rate of the super-capacitor is minutes as compared to hours for a battery

See Chapter 7 for additional RMFBU information.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

3. Intel® Tri-Mode RAID Adapters Detailed Characteristics

3.1 Intel RAID Module RMSP3TD160F Description

The Intel® RAID adapter RMSP3TD160F is a full featured tri-mode RAID adapter with 16 internal ports based on the Avago® SAS3516 RAID-On-Chip (ROC). It supports RAID levels 0, 1, 5,6,10, 50, 60 and includes 4 GB of 72-bit cache memory DDR4 at 2133 MHz. It has an x8 PCI Express* 3.0. PCIe interface and it supports up to 64 physical SAS.SATA devices** and up to 64 virtual drives. It also supports up to 4 direct attach NVMe drives. This adapter has a connector to install the Drive Encryption Premium Key. The next figures describe the connectors for this adapter.

** Physical devices include expanders and if dual-ported back planes are being used, each drive counts twice.

Front side

Figure 1 -

Back side

Intel SAS RMSP3TD160F RAID adapter Layou

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

3.2 Intel RAID Module RMSP3TD160F Dimensions

The next figure show the dimensions for the Intel RAID module RMSP3TD160F.

Figure 2 -

Intel RMSP3TD160F RAID adapter Dimensions

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Typical

RMFBU learn

3.3V Supply

0.24W

0.28W

+ 12 Supply

16.4W

16.7W

3.3V Auxillary Supply

0.03W

0.08W

Total Power

16.64W

17.02W

3.2.1 Intel RAID Adapter RMSP3TD160F Electrical, Thermal and Atmospheric Requirements.

List of operating conditions for the Intel® RAID adapter RMSP3TD160F:

• Power Supply voltage at the 12V rail (from PCI edge connector): 12V ± 8 percent.

• Power Supply voltage at the 3.3V rail (from PCI edge connector): 13.3V ± 9 percent.

• Relative humidity range is 20 percent to 80 percent non-condensing

• Temperature range: 10 °C to +55 °C (with or without the RMFBU module attached)

List of non-operating conditions (while in storage or in transit) for the Intel® RAID adapter

RMSP3AD160F:

• Relative humidity range is 5 percent to 90 percent non-condensing.

• Temperature range: –40°C to +70°C without battery backup unit

• Temperature range: 0°C to +45°C with battery backup unit

3.2.2 Intel RAID Adapter RMSP3TD160F Power Consumption.

The following table describes the power consumption of the Intel® RAID adapter RMSP3AD160Funder the following states: State 1: While sitting idle at the DOS prompt or the EFI shell. State 2: During a drive stress test; average over 20 minutes of sustained operation

Power Mode State 1 State 2

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

3.3 Intel RAID Adapter RMSP3DD080F

The Intel® RAID module RMSP3DD080F is a full featured tri-mode RAID adapter with 8 internal ports based on the Avago® SAS3508 RAID-On-Chip (ROC). It supports RAID levels 0, 1, 5,6,10, 50, 60 and includes 4 GB of 72-bit cache memory DDR4 at 2133 MHz. It has an x8 PCI Express* 3.0. PCIe interface and it supports up to 64 physical SAS/SATA devices*, 2 direct attach NVMe drives and up to 64 virtual drives**. This adapter has a connector to install the Drive Encryption Premium Key. The next figure describes the connectors for this adapter.

** Physical devices include expanders and if dual-ported back planes are being used, each drive counts twice.

Front side

Back side

Figure 3 -

Intel SAS RMSP3DD080F RAID adapter Layout

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

3.4 Intel RAID Module RMSP3DD080F Dimensions

The next figure show the dimensions for the Intel RAID module RMSP3DD080F.

Figure 4 -

Intel RMSP3DD080F RAID adapter Dimensions

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Typical

RMFBU learn

3.3V Supply

+ 12 Supply

3.3V Auxillary Supply

Total Power

3.4.1 Intel RAID Adapter RMSP3DD080F Electrical, Thermal and Atmospheric Requirements.

List of operating conditions for the Intel® RAID adapter RMSP3DD080F:

• Power Supply voltage at the 12V rail (from PCI edge connector): 12V ± 8 percent.

• Power Supply voltage at the 3.3V rail (from PCI edge connector): 13.3V ± 9 percent.

• Relative humidity range is 20 percent to 80 percent non-condensing

• Temperature range: 10 °C to +55 °C (with or without the RMFBU module attached)

List of non-operating conditions (while in storage or in transit) for the Intel® RAID adapter

RMSP3DD080F:

• Relative humidity range is 5 percent to 90 percent non-condensing.

• Temperature range: –40°C to +70°C without battery backup unit

• Temperature range: 0°C to +45°C with battery backup unit

3.4.2 Intel RAID Adapter RMSP3DD080F Power Consumption.

The following table describes the power consumption of the Intel® RAID adapter RMSP3DD080F under the following states: State 1: While sitting idle at the DOS prompt or the EFI shell. State 2: During a drive stress test; average over 20 minutes of sustained operation

Power Mode State 1 State 2

0.24W 0.28W

13.56W 13.80W

0.03W 0.08W

13.83W 14.16W

3.5 Intel RAID Adapter RMSP3MD088F

The Intel® RAID module RMSP3MD088Fis an entry level tri-mode RAID adapter with 8 internal ports based on the Avago® SAS3508 SAS I/O controller (IOC). It supports RAID levels 0, 1,5 and 10. It has an x8 PCI

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Express* 3.0. PCIe interface and it supports up to 64 physical devices* and up to 32 virtual drives**. The next figure describes the connectors for this adapter.

** Physical devices include expanders and if dual-ported back planes are being used, each drive counts twice.

Top side

Figure 5 -

Bottom side

Intel SAS RMSP3MD088F RAID adapter Layout

3.6 Intel RAID Module RMSP3MD088F Dimensions

The next figure show the dimensions for the Intel RAID module RMSP3HD160F.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Figure 6 -

Intel RMSP3MD088F RAID adapter Dimensions

3.6.1 Intel RAID Adapter RMSP3MD088F Electrical, Thermal and Atmospheric Requirements.

List of operating conditions for the Intel® RAID adapter RMSP3HD080E:

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Typical

RMFBU learn

3.3V Supply

0.23W

0.20W

+ 12 Supply

16.40W

17.48W

N/A

3.3V Auxillary Supply

0.07W

0.03W

Total Power

16.70W

17.71W

N/A

• Power Supply voltage at the 12V rail (from PCI edge connector): 12V ± 8 percent.

• Power Supply voltage at the 3.3V rail (from PCI edge connector): 13.3V ± 9 percent.

• Relative humidity range is 20 percent to 80 percent non-condensing

• Temperature range: 10 °C to +55 °C (with or without the RMFBU module attached)

List of non-operating conditions (while in storage or in transit) for the Intel® RAID adapter

RMSP3HD080E:

• Relative humidity range is 5 percent to 90 percent non-condensing.

• Temperature range: –40°C to +70°C without battery backup unit

3.6.2 Intel RAID Adapter RMSP3MD088F Consumption.

The following table describes the power consumption of the Intel® RAID adapter RSP3TD160F under the following states: State 1: While sitting idle at the DOS prompt or the EFI shell. State 2: During a drive stress test; average over 20 minutes of sustained operation

Power Mode State 1 State 2

3.7 Intel RAID Adapter RMSP3WD080E

The Intel® RAID module RMSP3WD080E an entry level tri-mode RAID adapter with 8 internal ports based on the Avago® SAS3408 SAS I/O Controller (IOC). It supports RAID levels 0, 1,10 and hybrid 5. It has an x8 PCI Express* 3.0. PCIe interface and it supports up to 64 physical devices* and up to 32 virtual drives**. The next figure describes the connectors for this adapter.

** Physical devices include expanders and if dual-ported back planes are being used, each drive counts twice.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Top side

Bottom side

Figure 7 -

Intel SAS RMSP3WD080E RAID adapter Layout

3.8 Intel RAID Module RMSP3WD080E Dimensions

The next figure show the dimensions for the Intel RAID module RMSP3HD160F.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Figure 8 -

Intel RMSP3WD080E RAID adapter Dimensions

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Typical

RMFBU learn

3.3V Supply

1.6W

+ 12 Supply

8.26W

8.42W

N/A

3.3V Auxillary Supply

0.03W

Total Power

9.89W

10.05W

N/A

3.8.1 Intel RAID Adapter RMSP3WD080E Electrical, Thermal and Atmospheric

Requirements.

List of operating conditions for the Intel® RAID adapter RMSP3HD080E:

• Power Supply voltage at the 12V rail (from PCI edge connector): 12V ± 8 percent.

• Power Supply voltage at the 3.3V rail (from PCI edge connector): 13.3V ± 9 percent.

• Relative humidity range is 20 percent to 80 percent non-condensing

• Temperature range: 10 °C to +55 °C (with or without the RMFBU module attached)

List of non-operating conditions (while in storage or in transit) for the Intel® RAID adapter

RMSP3HD080E:

• Relative humidity range is 5 percent to 90 percent non-condensing.

• Temperature range: –40°C to +70°C without battery backup unit

3.8.2 Intel RAID Adapter RMSP3WD080E Consumption.

Power Mode State 1 State 2

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

4. Conectivity and Drive Support

4.1 Connectivity and Drive Support

The Intel® Tri- Mode RAID Adapters have standard female SFF-8643 (Mini-SAS High-Density) connectors to connect the drives and are designed for the Intel® Server Boards and Systems for the next-generation Intel® Xeon® processor product family. Those systems have the appropriate backplane capable of supporting SAS, SATA and NVMe drives.

4.2 Connector Pinout

The Intel® Tri- Mode RAID Adapters have standard female SFF-8643 (Mini-SAS High-Density) connectors to connect to drives. The connector pinout follows the SFF-9402 specification. SFF-9402 defines how to share sideband signals between SAS and PCI Express (NVMe).

When SAS/SATA drives are connected either as a direct attach through an SFF-8680 bay or through an enclosure, existing 12Gb/s SAS cables and mid-plane connector designs are supported by the RAID module . The next figure shows the pinout for the female SFF-8643 connectors on the adapter cards.

Figure 9. Intel®

RMSP3TD160F RAID Adapter SFF-8643 connector

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Pin#

Signal Name

Pin#

Signal Name

Pin#

Signal Name

Pin#

Signal Name

SB7

SB3 GND

SB4

SB5

SB0

SB1

SB2

SB6

GND

RX1+

RX0+

TX1+

TX0+

RX1-

RX0-

TX1-

TX0-

GND

RX3+

RX2+

TX3+

TX2+

RX3-

RX2-

TX3-

TX2-

GND

Table 7. SFF-8643 connector pinout

Signals on Pins A1, A2, B1, B2, C1, C2, D1 and D2 are the shared sideband signals.

4.3 SAS/SATA Drive Support

The Intel® Tri-Mode RAID Adapters are designed to support SAS, SATA and NVMe drives; however, if desired, they can be used to connect only SAS and SATA drives. In this case, standard SAS cables and backplanes can be used (make sure to use only those backplanes which have been tested and listed as compatible hardware).

The Intel® Tri-Mode RAID Adapters support the ANSI Serial Attached SCSI standard, version 3.0. In addition, the adapters support the SATA III protocol defined by the Serial ATA specification (SAS), version 3.0. Supporting both the SAS interface and the SATA interface, the SAS adapter is a versatile adapter that provides the backbone of both server and high-end workstation environments.

Each port on the RAID Module supports SAS devices, SATA devices, or both, through these protocols:

• SAS Serial SCSI Protocol (SSP), which enables communication with other SAS devices

• SATA, which enables communication with other SATA devices

• Serial Management Protocol (SMP), which communicates topology management information

directly with an attached SAS expander device, and

• Serial Tunneling Protocol (STP), which enables communication with SATA devices through an

attached expander.

SAS technology brings a wealth of options and flexibility with the use of SAS devices and SATA devices within the same storage infrastructure. However, SAS devices and SATA devices bring individual characteristics that make each one a more suitable choice depending on the requirements of the given operating environment and storage needs. The Intel® Tri-Mode Adapters provides the flexibility to combine these two (2) storage technologies on the same adapter and within the same enclosure.

Note: combining SAS drives and SATA drives within the same virtual drive is allowed on some adapters but Intel discourages this practice.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

4.4 Intel® 12 Gb/s SAS 3.0 Expander Support

For system configurations that require more physical SAS/SATA drives then the adapter’s number of ports, the Intel® Tri-Mode RAID Adapters can support the following Intel® RAID Expanders:

Intel Product Code Product Description

SAS 3.0 12 Gb/s expander

iPC – RES3FV288

SAS Expander RES3FV288

Intel

• Featuring 6Gbps data aggregation for 12Gbps data transfer with 6Gb/s devices

• Low Profile MD2 PCIe* add-in card form factor

• 28 internal ports and 8 external ports

• Power from PCIe x1

• HD Mini-SAS 8643 Connectors

Kit includes: (1) SAS Expander card, (2) HD-HD 250mm Expander-to-RAID card cables, and PCI brackets for low profile and full height.

iPC – RES3TV360

Intel® SAS Expander RES3TV360

• Featuring 6Gbps data aggregation for 12Gbps data transferwith 6Gb/s devices

• Internal mount mid-plane form factor

• 36 internal ports supporting point-to-pont 12, 6, and 3 Gb/s data transfer rates

• RA 4-pin power connector

• HD Mini-SAS 8643 connectors

Kit includes: (1) SAS expander card; (1) 130mm power cable; (1 set) Expander-to-backplane cables: (4) HD-HD 165mm, (1) HD-HD 300mm, (1) HD-HD 250mm, (3) Rubber Pads, and mounting screws.

SAS 3.0 12 Gb/s expander

Figure 10. Supported Intel® SAS expander options

4.4.1 SAS Expander Configuration for the Intel® RMSP3TD160F RAID Module

The SAS ports of the Intel® RMSP3TD160F RAID Module are driven by two (2) SAS cores and therefore, are divided into two (2) separate SAS domains: Domain 1 and Domain 2. One or two SAS connectors within a common domain can be cabled to a single SAS Expander Card when cabling the RAID Adapter to a SAS Expander.

Note: Mixing SAS ports from different domains to a single SAS expander card is not supported.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Figure 11. RAID module RMS3PTD160 SAS port domain identification

Supported Intel SAS Expanders include several multiport mini-SAS HD (8643) connectors. Some are used as output connectors to a backplane while others are used as input connectors from the RAID Module. The following diagrams identify the connector types for each supported SAS expander card.

Figure 12. SAS ports for the RES3FV288

Figure 13. SAS ports for the RES3TV360

Input Cable Configuration NOTES:

The SAS Expander cards identified above can support one (1) or two (2) Input SAS port cables.

When routing two (2) input SAS port cables from the RAID Module, use cables from the same SAS domain, as illustrated on the previous page.

Important notice:

Be careful not to connect a SAS expander to a RAID module port configured for NVMe use.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

4.5 NVMe Drive Support

The Intel® Tri-Mode RAID adapters are designed to support SAS, SATA and NVMe drives; however, if desired, they can be used to connect only NVMe drives.

Note1: At launch time no mixed mode is allowed, this means that either SAS/SATA or NVMe drives can be used but not the combination of the two. The mixed mode will be supported at a later firmware version.

The support for NVMe drives is limited to the U.2 (SFF-8639) form factor, connected through a supported backplane using a specially designed Tri-Mode cable. This cable has one (1) dual SF- SFF-8643 (Mini-SAS High-Density) on one end and two (2) OCuLink connectors on the other end to connect to the backplane (the backplane too has both, SF- SFF-8643 and OCuLink connectors). The Intel Part Number for this cable is AXXCBL700HDCV and it connects up to two NVMe drives.

Note2: Previous generation servers like the R2000WT family or the S2600CW family provide support for NVME drives using a special NVMe kit which includes a backplane. This backplane only has SFF-8643 (MiniSAS HD) connectors and is NOT compatible with the Tri-Mode RAID Adapters.

Note 3: Using the cable AXXCBL700HDCV on a RAID adapter other than the Tri-Mode RAID adapters can damage your equipment. Only use the cables intended for those adapters.

The next figures show how to connect the AXXCBL700HDCV cable

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Figure 14. Connecting the AXXCBL700HDCV to the backplane

Figure 15. Connecting the AXXCBL700HDCV cable to the RAID adapter

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

5. Hardware Installation

Warnings

Heed safety instructions: Before working with your server product, whether you are using this guide or any

other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide. Use of other products/components will void the UL listing and other regulatory approvals of the product and will most likely result in noncompliance with product regulations in the region(s) in which the product is sold. System power on/off: The power button DOES NOT turn off the system AC power. To remove power from the system, you must unplug all AC power cords from the server system before you open the chassis, add, or remove any components. Hazardous conditions, devices and cables: Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off the server and disconnect the power cord, telecommunications systems, networks, and modems attached to the server before opening it. Otherwise, personal injury or equipment damage can result. Installing or removing jumpers: A jumper is a small plastic encased conductor that slips over two jumper pins. Some jumpers have a small tab on top that you can grip with your fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab, take care when using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can damage the contacts inside the jumper, causing intermittent problems with the function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board.

Electrostatic Discharge (ESD)

Electrostatic discharge can cause damage to your computer or the components within it. ESD can occur without the user feeling a shock while working inside the system chassis or while improperly handling electronic devices like processors, memory or other storage devices, and add-in cards.

Intel recommends the following steps be taken when performing any procedures described within this document or while performing service to any computer system.

• Where available, all system integration and/or service should be performed at a properly equipped ESD

workstation

• Wear ESD protective gear like a grounded antistatic wrist strap, sole grounders, and/or conductive shoes

• Wear an anti-static smock or gown to cover any clothing that may generate an electrostatic charge

• Remove all jewelry

• Disconnect all cables and cords attached to the server before performing any integration or service

• Touch any unpainted metal surface of the chassis before performing any integration or service

• Hold all circuit boards and other electronic components by their edges only

• After removing electronic devices from the system or from their protective packaging, place them

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

component side up on to a grounded anti-static surface or conductive foam pad. Do not place electronic devices on to the outside of any protective packaging.

5.1 RAID Adapter Installation

5.1.1 Requirements

The following items are required to install an Intel® RAID Adapter:

• Intel® RAID Adapter

• Intel server board based server system with an empty PCIe slot and a Supported Backplane

• Internal Tri-Mode data cables. These cables have one dual SF- SFF-8643 on one end and two oculink

connectors on the other end.

• SAS, SATA or NVMe drives

5.1.2 Packing List

1 – Intel RAID Module w/snap-on bumper (Pre-Installed) 4 – White Plastic Barrel Stand-offs 4 – White Plastic Locking Pins with pull-tab

Note: Intel RAID Products do not include data cables. Appropriate Tri-Mode data cables may be included with your server system or must be purchased separately.

5.2 RAID Adapter Installation

5.2.1 Requirements

The following items are required to install an Intel® RAID Adapter:

• Intel® RAID Adapter

• Intel server board based server system with support for an Intel Integrated RAID Adapter

• Internal SAS/SATA data cables

• SAS drives or SATA drives

5.2.2 Packing List

1 – Intel RAID Adapter 2– Low profile mounting bracket 3 – Attention Document 4 – Warranty Document

Note: Intel RAID Products do not include SAS / SATA data cables. Appropriate SAS / SATA data cables may be included with your server system or must be purchased separately.

5.2.3 Installation Instructions

1. Unpack the Intel® RAID Adapter.

Unpack your RAID Adapter. Inspect it for damage. If it appears damaged, contact your Intel Customer and Technical Support representative.

2. Turn off the power to the computer, and disconnect the AC power cord.

3. Remove the computer cover. Refer to the system documentation for instructions.

4. Install the RAID Adapter. a) Remove the riser card (the adapter can be installed on any riser card) b) Remove the filler panel

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

c) Insert the adapter in the desired slot. Press down gently, but firmly to make sure that the card is

seated correctly in the slot. Secure the bracket with the bracket screw.

Figure 16 RAID Adapter Installation (insert adapter in slot)

d) Insert back the riser card, press down gently, but firmly.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Figure 17 RAID Adapter Installation (insert riser card)

Figure 18 RAID Adapter Installation (adapter installed)

5. Install SAS and / or SATA drives in the host computer case. Refer to the documentation for the devices

for any pre-installation configuration requirements.

6. Connect internal SAS / SATA data cables to appropriate Drives or Backplane

7. Carefully route SAS / SATA data cables back to the Intel RAID Adapter

8. Attach SAS / SATA data cables to the Intel RAID Adapter

9. Reinstall the computer cover, and reconnect the AC power cords to the system

The hardware installation is now complete and the Intel RAID Adapter is ready to be configured. For complete Intel RAID Adapter configuration information, refer to the Intel® RAID Software User Guide for full featured and entry level RAID controllers available to download from the Intel Support Site:

http://support.intel.com

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

6. Safety and Regulatory (Class A)

Intel RAID products typically have a variety of individual component level certifications; however final regulatory compliance is based on the combination of the RAID card being within an Intel Server System.

Intended Application – The RAID products are evaluated as Information Technology Equipment (ITE) as part of Intel’s server chassis systems. These products are intended to be into Intel server systems that will be installed in offices, schools, computer rooms, and similar commercial type locations. The suitability of this product for other product categories and environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm systems, test equipment, etc.), other than an ITE application, may require further evaluation. Product Safety and EMC Compliance noted below is based on the RAID product into an Intel server.

6.1 Product Safety Compliance

• UL60950 – CSA 60950(USA / Canada)

• EN60950 (Europe)

• IEC60950 (International)

• CB Certificate & Report, IEC60950 (report to include all country national deviations)

• CE - Low Voltage Directive 2006/95/EC (Europe)

6.2 Product EMC Compliance – Class A Compliance

• FCC /ICES-003 - Emissions (USA/Canada) Verification

• CISPR 22 – Emissions (International)

• EN55022 - Emissions (Europe)

• EN55024 - Immunity (Europe)

• CE – EMC Directive 2004/108 EC (Europe)

• VCCI Emissions (Japan)

• AS/NZS 3548 Emissions (Australia / New Zealand)

• BSMI CNS13438 Emissions (Taiwan)

• KC Certification (Korea)

6.3 Product Environmental Compliance

Intel has a system in place to restrict the use of banned substances in accordance with worldwide regulatory requirements. A Material Declaration Data Sheet is available for Intel products. For more reference on material restrictions and compliance you can view Intel’s Environmental Product Content Specification at

http://supplier.intel.com/ehs/environmental.htm.

• Europe - European Directive 2002/95/EC

o Restriction of Hazardous Substances (RoHS)

Threshold limits and banned substances are noted below. Quantity limit of 0.1% by mass (1000 PPM) for: Lead, Mercury, Hexavalent Chromium, Polybrominated Biphenyls Diphenyl Ethers (PBB/PBDE) Quantity limit of 0.01% by mass (100 PPM) for: Cadmium

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

• California Code of Regulations, Title 22, Division 4.5, Chapter 33:

Best Management Practices for Perchlorate Materials

• China – Restriction of Hazardous Substances (China RoHS)

• WEEE Directive (Europe)

• Packaging Directive (Europe)

• REACH Directive (Europe)

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

7. Intel® RAID Maintenance Free Backup Unit AXXRMFBU7

7.1 Intel® RAID Maintenance Free Backup Unit AXXRMFBU7

Intel® RAID Adapters provide reliability, high performance, and fault-tolerant disk subsystem management. A complete fault-tolerant strategy requires protection of all data, including the unwritten cached data in the RAID card’s RAM cache. If power is lost, the data in the RAM cache is lost. To avoid losing this data, a RAID Maintenance Free Backup Unit (RMFBU) can be added to the configuration. During normal system operation, the RMFBU monitors the voltage level of the DRAM of the Intel® RAID Adapter or Intel® RAID Module. If the voltage drops below a predefined level due to an AC power failure or brief power outage, the RMFBU protects the integrity of the cached data by providing sufficient back-up power to offload the data from the RAID RAM to the NAND flash. When the voltage level returns to an acceptable level, the RAID RAM is recovered from flash, and all pending writes to storage devices are completed without losing any data. The cache memory available on Intel® RAID Adapters and Intel® RAID Modules can improve the overall system performance. Writing data to the adapter’s cache memory is much faster than writing data to a storage device. Write operations appear to complete very quickly at the software application level. The Intel® RAID Module writes the cached data to the storage device when system activity is low or when the cache is getting full. The risk of using write-back cache is that the cached data can be lost if the AC power fails before it is written to the storage device. This risk factor is eliminated when the Intel® RAID Module has an RMFBU installed. In addition, the RMFBU provides an alternative to using an Uninterruptible Power Supply (UPS) or can act as a second level of fault tolerance when used with a UPS. Furthermore, it eliminates the need for lithium ion (Li-ion) batteries traditionally used to protect DRAM cache memory on PCI RAID adapters. Therefore this is a greener and lower total cost cache protection solution. The RMFBU has built-in functionality to charge the capacitor module automatically and to communicate status information such as voltage, temperature, and current to the host server system. The AXXRMFBU7 RMFBU is a kit consisting of a FBU345 super capacitor bank, a plastic bracket to attach the super capacitor bank to the chassis, and two (2) extender cables, one 605 mm long and the other 930 mm long. The FBU345 consists of a bank of Electric Double-Layer Capacitors (EDLC) or super capacitors capable of storing a high amount of electric energy while active. In the event of a power failure, the FBU345 provides the power needed for the data offload. It also has an over-temperature detection circuitry and a discharge circuitry that discharges the capacitors while disconnected from the RAID adapter or when the system on which it is installed is turned off.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

7.2 FBU345 Specifications and Layout

The Table 8. FBU345 specifications shows the specifications for the FBU 345 Supercap. The Figure 19. FBU345 layoutsame device followed by its dimensions and pin description.

Item Value

Super Capacitor Module Operating Temperature 0°C to 55°C

Super Capacitor Module Storage Temperature 0°C to 70°C

Rated Voltage 13.5 VDC

Surge Voltage 14.25 VDC

Super Capacitor Module Capacity 7.6 F

Capacity Tolerance 65 mm x 52 mm

RMFBU5 Cache Off-load Module Mechanical -0%, +30%

Rated Energy 0.04 Wh

Super Capacitor Module Charge Time Approximately 2 minutes

Super Capacitor Module Shelf Life 3 years

Super Capacitor Module Operational Life

Maximum Equivalent Series Resistance (ESR) 190 mOhm

Weight 46 g

Intel provides a three-year warranty on the Intel® RMFBU AXXRMFBU7.

Table 8. FBU345 specifications

The FBU345 is very sensitive to the high operating temperature, and excessive heat may shorten its life. The over temperature detection circuitry sends an event to the RAID adapter when the operating temperature is over 55 degrees Celsius, which gets registered in the adapter’s log file.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Width (D)

51.0 +/- 1.0 mm

Length (L)

64.0 +/- 1.0 mm

Height T

13.1 +/- 0.4 mm

Pin #

Signal

Color

EDLC GND

Black

GND_ 3.3V

Black

P3V3_VDD

Red 4 +EDLC

Red 5 SWBDA_P3V3

Yellow

SWBCL_P3V3

Blue

/Event

White

Empty

Figure 19. FBU345 layout

FBU 345 Dimensions

Pin Description

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

7.2.1 Extender Cable

The extender cable has an 8-pin Molex 43020-0601 connector on one end and a 9-pin Molex 501330-0900 connector on the other end. Two (2) versions of the cable are included in the kit, one 605 mm long and the other 930 mm long. The routing of the cable is shown in Figure 20. Extender cable pinout

Figure 20. Extender cable pinout

7.3 Intel® RAID Maintenance Free Backup Unit Installation

The mounting hardware included with Intel® Accessory Kit AXXRMFBU7 is designed to be compatible for installation in to a supported Intel pedestal and rack mount server system. An alternate attachment method may be needed when installing this accessory into a non-Intel chassis. Intel recommends using industrialgrade Velcro* or other industrial adhesive material as an acceptable option. Refer to the server chassis documentation or discuss an appropriate attachment method with the server chassis manufacturer to ensure the attachment mechanism complies with the chassis requirements.

1. Place the Super Capacitor Module and the plastic holder front-side-up on a flat, clean, static-

free surface.

2. Press the Super Capacitor Module into the plastic holder until the module clicks firmly into

place, as shown in the following figure (note that the actual shape of the product may vary).

Figure 21 - AXXRMFBU7 Mounting Assembly

3. Identify the mounting location for the RMFBU Assembly

a) In a compatible Intel Server system, align the tabs on the holder with the holes on the mounting plate and slide the holder until it clicks and locks into place.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

2U System – Air Duct RMFBU Mounting Plate

b) In a non-Intel chassis, apply adhesive material to the RMFBU assembly and affix to desired mounting location within the chassis.

Figure 22 - RMFBU Assembly Installation

4. Carefully route the extender cable to the Intel RAID Module and attach the cable to the matching

connector. Use the appropriate cable (605 mm or 930 mm long) that best fits.

Figure 23 - Connecting the RMFBU7 to the RAID adapter

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

7.4 Monitoring the Intel® RAID Maintenance Free Backup Unit

Three different utilities can be used to monitor the RMFBU: StorCli, RAID Web Console 3 and HII. This section only describes how to use HII for this purpose. For details on how to monitor using the other utilities, consult the Intel® RAID Utilities User Guide.

7.4.1 Monitoring the RMFBU with the Human Interface Infrastructure.

The Human Interface Infrastructure (HII) can be used to configure disk arrays and logical drives. It is independent of the operating system and can be accessed at server start-up through the Setup BIOS. The HII can only be accessed when the system is configured for UEFI boot mode. The HII can also be used to monitor the MFBU.

Note: Refer to the Intel® RAID Software User Guide for full featured and entry level RAID controllers for more information on the Human Interface Infrastructure.

To view the RMFBU information, do the following:

1. At boot, press the <F2> key when prompted and enter the Setup BIOS.

2. Navigate to Main, Advanced, PCI Configuration, and then UEFI Option ROM Control.

3. Look for the RAID card under the Storage Controller list.

4. Press Enter to get into the Main Menu for the HII Configuration Utility.

Figure 24. HII Dashboard view screen

5. Enter the Main Menu and select Hardware Components to go to the Hardware Component

Screen.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Battery Type

A string that identifies the RMFBU type.

Figure 25. HII Hardware Components screen

6. The Hardware Component Screen shows the Battery Status. Select the Battery Management

option.

7. The Battery Management screen contains the following information:

Figure 26. HII Battery Management screen

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Battery Status

The current status of the RMFBU, normally it should be optimal.

Temperature

The current temperature of the battery pack or supercap

With time, the capacitance decreases, this field shows the current capacitance of the

Manufacturer

The manufacturer of the RMFBU unit.

Serial Number

The serial number of the RMFBU unit.

Date of Manufacture

The date of manufacture of the RMFBU unit.

Module Version

The identifier of the version of the firmware that controls the RMFBU.

Status

The current status of the RMFBU, normally it should be optimal.

Voltage

The current voltage of the RMFBU unit.

Current

The amount of current being delivered by the RMFBU.

Design Capacity

The original capacitance that was intended for the Supercap.

Remaining Capacity

The capacitance left in the Supercap.

Auto-learn Mode

The learning mode currently set for the RMFBU.

Capacitance

battery pack or supercap.

8. Select the Advanced field at the bottom of the of the Battery Management Screen.

9. The Battery Management Screen contains the following information:

Next Learn Cycle Time The time and date for the next learn cycle.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

EDLC

Electric Double-Layer Capacitors

Appendix A. Glossary

Term Description

Acronym for Basic Input/Output System. Software that provides basic read/write capability.

BIOS

configuration

Usually kept as firmware (ROM-based). The system BIOS on the motherboard of a computer boots and controls the system. The BIOS on your host adapter acts as an extension of the system BIOS.

Refers to the way a computer is set up, the combined hardware components (computer, monitor, keyboard, and peripheral devices) that make up a computer system, or the software settings that allow the hardware components to communicate with each other.

device driver

domain validation

DRAM cache memory

drive group

EEPROM

external SAS device

Fusion-MPT architecture

A program that permits a microprocessor (through the operating system) to direct the operation of a peripheral device.

A software procedure in which a host queries a device to determine its ability to communicate at the negotiated data rate.

Dynamic random access memory (DRAM) is a type of memory typically used for data or program code that a computer processor needs to function. DRAM is a common type of random access memory (RAM) used in personal computers (PCs), workstations, and servers.

A group of physical drives that combines the storage space on the drives into a single segment of storage space. A hot spare drive does not actively participate in a drive group.

Acronym for Electronically Erasable Programmable Read-Only Memory. It is a memory chip that typically stores configuration information, as it provides stable storage for long periods without electricity and can be reprogrammed. See NVRAM.

A SAS device installed outside the computer cabinet. These devices are connected using specific types of shielded cables.

Acronym for Fusion-Message Passing Technology architecture. Fusion-MPT consists of several main elements: Fusion-MPT firmware, the Fiber Channel and SCSI hardware, and the operating system-level drivers that support these architectures. Fusion-MPT architecture offers a single binary, operating system driver that supports both Fiber Channel and SCSI devices.

host

host adapter board A circuit board or circuit that provides a device connection to the computer system.

hot spare

internal SAS device

main memory

The computer system in which a RAID controller is installed. It uses the RAID controller to transfer information to and from devices attached to the SCSI bus.

An idle, powered on, standby drive that is ready for immediate use in case of drive failure. A hot spare does not contain any user data. A hot spare can be dedicated to a single redundant array or it can be part of the global hot-spare pool for all arrays managed by the controller. When a drive fails, the controller firmware automatically replaces and rebuilds the data from the failed drive to the hot spare. Data can be rebuilt only from virtual drives with redundancy (RAID levels 1, 5, 6, 10, 50, and 60; not RAID level 0), and the hot spare must have sufficient capacity.

A SAS device installed inside the computer cabinet. These devices are connected by using a shielded cable.

The part of computer memory that is directly accessible by the CPU (usually synonymous with RAM).

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Acronym for peripheral component interconnect Express. A high-performance, local bus

devices.

Acronym for Redundant Array of Independent Disks (originally Redundant Array of Inexpensive

protection.

Term Description

NVRAM

PCI

PCI Express

peripheral devices

PHY

Acronym for nonvolatile random access memory. An EEPROM (electronically erasable read-only memory) chip that stores configuration information. See EEPROM.

Acronym for peripheral component interconnect. A high-performance, local bus specification that allows the connection of devices directly to computer memory. The PCI Local Bus allows transparent upgrades from 32-bit data path at 33 MHz to 64-bit data path at 33 MHz, and from 32-bit data path at 66 MHz to 64-bit data path at 66 MHz.

specification that allows the connection of devices directly to computer memory. PCI Express is a two-way, serial connection that transfers data on two pairs of point- to-point data lines. PCI Express goes beyond the PCI specification in that it is intended as a unifying I/O architecture for various systems: desktops, workstations, mobile, server, communications, and embedded

A piece of hardware (such as a video monitor, drive, printer, or CD-ROM) used with a computer and under the control of the computer. SCSI peripherals are controlled through an Intel® RAID Controller (host adapter).

The interface required to transmit and receive data packets transferred across the serial bus. Each PHY can form one side of the physical link in a connection with a PHY on a different SAS device. The physical link contains four wires that form two differential signal pairs. One differential pair transmits signals, while the other differential pair receives signals. Both differential pairs operate simultaneously and allow concurrent data transmission in both, thereceive and the transmit directions.

RAID

RAID levels

SAS

SAS device

SATA

Disks). An array (group) of multiple independent drives managed together to yield higher reliability, performance, or both exceeding that of a single drive. The RAID array appears to the controller as a single storage unit. I/O is expedited because several drives can be accessed simultaneously. Redundant RAID levels (RAID levels 1, 5, 6, 10, 50, and 60) provide data

A set of techniques applied to drive groups to deliver higher data availability, performance characteristics, or both to host environments. Each virtual drive must have a RAID level assigned to it.

Acronym for Serial Attached SCSI. A serial, point-to-point, enterprise-level device interface that leverages the proven SCSI protocol set. The SAS interface provides improved performance, simplified cabling, smaller connections, lower pin count, and lower power requirements when compared to parallel SCSI. SAS controllers leverage a common electrical and physical connection interface that is compatible with Serial ATA. The SAS controllers support the ANSI Serial Attached SCSI Standard, Version 2.0. In addition, the controller supports the Serial ATA III (SATA III) protocol defined by the Serial ATA Specification, Version 3.0. Supporting both the SAS interface and the SATA III interface, the SAS controller is a versatile controller that provides the backbone of both server and high-end workstation environments. Each port on the SAS RAID controller supports SAS devices, SATA devices, or both.

Any device that conforms to the SAS standard and is attached to the SAS bus by a SAS cable. This includes SAS RAID controllers (host adapters) and SAS peripherals.

Acronym for Serial Advanced Technology Attachment. A physical storage interface standard, SATA is a serial link that provides point-to-point connections between devices. The thinner serial cables allow for better airflow within the system and permit smaller chassis designs.

SSP

stripe The portion of a stripe that resides on a single drive.

Acronym for Serial SCSI Protocol. SSP enables communication with other SAS devices. Each PHY on the SAS controller can function as an SSP initiator.

Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide

Drive striping writes data across two or more drives. Each stripe spans two or more drives but

data redundancy.

Term Description

The total drive space consumed by a stripe not including a parity drive. For example, if a stripe contains 64 KB of drive space and has 16 KB of data residing on each drive, the stripe size is 64

stripe size

striping

strip size

KB and the strip size is 16 KB. A larger stripe size produces improved read performance, especially if most of the reads are sequential. For mostly random reads, select a smaller stripe size.

consumes only a portion of each drive. Each drive, therefore, may have several stripes. The amount of space consumed by a stripe is the same on each drive that is included in the stripe. The portion of a stripe that resides on a single drive is a strip, also known as a stripe element. Striping by itself does not provide data redundancy; striping in combination with parity provides

The drive space consumed by a strip. For example, if a stripe contains 64 KB of drive space and has 16 KB of data residing on each drive, the stripe size is 64 KB and the strip size is 16 KB. The stripe depth is four (four drives in the stripe). You can specify strip sizes of 8 KB, 16 KB, 32 KB, 64 KB, 128 KB, 256 KB, 512 KB, or 1 MB.

UPS

Uninterruptible Power Supply. An electrical device that provides power off of a battery when the input power source (AC) fails.

Intel RSP3TD160, RSP3MD088, RSP3DD080, RSP3WD080 Hardware User's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1. Preface

1.1 About This Document

1.2 Document Organization

1.3 Product Support Collaterals

1. Product Overview

2. Intel® Tri-Mode RAID adapters General Features

2.1 Overview

2.2 Benefits of the SAS Interface

2.3 Benefits of the NVM Express (NVMe) interface

2.4 Intel® Tri-Mode RAID Adapter Features

2.4.1 SAS Features

2.4.2 SATA III Features

2.4.3 NVMe Interface Features

2.4.4 Usability Features

2.4.5 Flexibility Features

2.4.6 Drive Roaming

2.4.7 Drive Migration

2.4.8 Safety Characteristics

2.5 Intel® Tri-Mode RAID adapters Feature Set.

2.6 Data Protection Features

2.7 Fault Tolerance Features

2.8 Array Performance Features

2.9 Drive Support Limits

2.10 Over temperature protection

2.11 UART Interface

2.12 Optional Intel® RAID Maintenance Free Backup Unit (RMFBU)

3. Intel® Tri-Mode RAID Adapters Detailed Characteristics

3.1 Intel RAID Module RMSP3TD160F Description

3.2 Intel RAID Module RMSP3TD160F Dimensions

3.2.1 Intel RAID Adapter RMSP3TD160F Electrical, Thermal and Atmospheric Requirements.

3.2.2 Intel RAID Adapter RMSP3TD160F Power Consumption.

3.3 Intel RAID Adapter RMSP3DD080F

3.4 Intel RAID Module RMSP3DD080F Dimensions

3.4.1 Intel RAID Adapter RMSP3DD080F Electrical, Thermal and Atmospheric Requirements.

3.4.2 Intel RAID Adapter RMSP3DD080F Power Consumption.

3.5 Intel RAID Adapter RMSP3MD088F

3.6 Intel RAID Module RMSP3MD088F Dimensions

3.6.1 Intel RAID Adapter RMSP3MD088F Electrical, Thermal and Atmospheric Requirements.

3.6.2 Intel RAID Adapter RMSP3MD088F Consumption.

3.7 Intel RAID Adapter RMSP3WD080E

3.8 Intel RAID Module RMSP3WD080E Dimensions

3.8.2 Intel RAID Adapter RMSP3WD080E Consumption.

4. Conectivity and Drive Support

4.1 Connectivity and Drive Support

4.2 Connector Pinout

4.3 SAS/SATA Drive Support

4.4 Intel® 12 Gb/s SAS 3.0 Expander Support

4.4.1 SAS Expander Configuration for the Intel® RMSP3TD160F RAID Module

4.5 NVMe Drive Support

5. Hardware Installation

5.1 RAID Adapter Installation

5.1.1 Requirements

5.1.2 Packing List

5.2 RAID Adapter Installation

5.2.1 Requirements

5.2.2 Packing List

5.2.3 Installation Instructions

6. Safety and Regulatory (Class A)

6.1 Product Safety Compliance

6.2 Product EMC Compliance – Class A Compliance

6.3 Product Environmental Compliance

7. Intel® RAID Maintenance Free Backup Unit AXXRMFBU7

7.1 Intel® RAID Maintenance Free Backup Unit AXXRMFBU7

7.2 FBU345 Specifications and Layout

7.2.1 Extender Cable

7.3 Intel® RAID Maintenance Free Backup Unit Installation

7.4 Monitoring the Intel® RAID Maintenance Free Backup Unit

7.4.1 Monitoring the RMFBU with the Human Interface Infrastructure.

Appendix A. Glossary