Revision History Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Date
Revision
Number
Modifications
February, 2012
1.0
Initial release.
Revision History
Disclaimers
Information in this document is provided in connection with Intel® products. No license, express
or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document. Except as provided in Intel®'s Terms and Conditions of Sale for such products, Intel®
assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to fitness for a particular
purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not intended for use in medical, life saving, or life sustaining
applications. Intel may make changes to specifications and product descriptions at any time,
without notice.
Designers must not rely on the absence or characteristics of any features or instructions
marked “reserved” or “undefined”. Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. Do not
finalize a design with this information. Revised information will be published when the product is
available. Verify with your local sales office that you have the latest datasheet before finalizing a
design.
The Intel® Server System P4000IP and Intel® Workstation System P4000CR Familymay contain
design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
Intel Corporation server baseboards contain a number of high-density VLSI and power delivery
components that need adequate airflow to cool. Intel‟s own chassis are designed and tested to
meet the intended thermal requirements of these components when the fully integrated system
is used together. It is the responsibility of the system integrator that chooses not to use Intel
developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of air flow required for their specific application and environmental
conditions. Intel Corporation cannot be held responsible if components fail or the server board
does not operate correctly when used outside any of their published operating or non-operating
limits.
Table 94. 2.5'' Hard Disk Drive Status LED States .................................................................... 82
Table 95. 2.5'' Hard Disk Drive Activity LED States ................................................................... 82
Table 96. 3.5'' Hard Disk Drive Status LED States .................................................................... 84
Table 97. 3.5'' Hard Disk Drive Activity LED States ................................................................... 85
Table 98. Calculated Mean Time Between Failure .................................................................... 92
Table 99. System Environment Limits Summary ....................................................................... 95
x Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS List of Tables
xi
<This page is intentionally left blank.>
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
1
Intel® Server System P4000IP and Intel® Workstation System Overview
1. Intel® Server System P4000IP and Intel®
Workstation System Overview
Intel® Server System P4000IP and Intel® Workstation System is 4U pedestal, 27'' length server
chassis that is designed to support Intel® Server Board S2600IP and Intel® Workstation Board
W2600CR. This chapter provides a high-level overview of the chassis features. Greater detail
for each major chassis component or feature is provided in the following chapters.
1.1 Intergrated System family overview
Intel® Server System P4000IP and Intel® Workstation System make extensive use of tool-less
hardware features and, depending on configuration and upgrade features, provides redundant
power supply, redundant cooling and hot swappable hard drives capability. Intel® Server
System P4000IP and Intel® Workstation System comes with the following configuration:
Your Intel® Workstation System P4304CR2LFJN(L) ships with the following items:
One Intel® Workstation Board W2600CR2(L)
One CRPS 1200W power supply, installed in the chassis
One fixed system CPU zone fan, installed in the chassis
One fixed system PCI zone fan, installed in the chassis
Four fixed HDD carrier tray, installed in the chassis
Front panel, installed in the chassis
Front Bezel for fixed hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Your Intel® Workstation System P4304CR2LFGN ships with the following items:
One Intel® Worstation Board W2600CR2
One CRPS 750W power supply, installed in the chassis
One fixed system CPU zone fan, installed in the chassis
One fixed system PCI zone fan, installed in the chassis
Four fixed HDD carrier tray, installed in the chassis
Front panel, installed in the chassis
Front Bezel for fixed hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Your Intel® Workstation System P4304CR2LFKN ships with the following items:
One Intel® Workstation Board W2600CR2
One CRPS 1600W power supply, installed in the chassis
One fixed system CPU zone fan, installed in the chassis
One fixed system PCI zone fan, installed in the chassis
Four fixed HDD carrier tray, installed in the chassis
Front panel, installed in the chassis
Front Bezel for fixed hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
Your Intel® Server System P4216IP4LHJC ships with the following items:
One Intel® Server Board S2600IP4
Two CRPS 1200W power supply, installed in the chassis
Five hot-swap redundant system fans, installed in the chassis
16*2.5'' hot-swap HDD cage with sixteen 2.5 HDD carrier, installed in the chassis
Front panel, installed in the chassis
Front Bezel for hot-swap hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Your Intel® Server System P4208IP4LHGC ships with the following items:
One Intel® Server Board S2600IP4
Two CRPS 750W power supply, installed in the chassis
Five hot-swap redundant system fans, installed in the chassis
8*2.5'' hot-swap HDD cage with eight 2.5 HDD carrier, installed in the chassis
Front panel, installed in the chassis
Front Bezel for hot-swap hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Your Intel® Server System P4308IP4LHJC(L) ships with the following items:
One Intel® Server Board S2600IP4 (L)
Two CRPS 1200W power supply, installed in the chassis
Five hot-swap redundant system fans, installed in the chassis
8*3.5'' hot-swap HDD cage with eight 3.5 HDD carrier, installed in the chassis
Front panel, installed in the chassis
Front Bezel for hot-swap hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Your Intel® Server System P4308IP4LHGC ships with the following items:
One Intel® Server Board S2600IP
Two CRPS 750W power supply, installed in the chassis
Five hot-swap redundant system fans, installed in the chassis
8*3.5'' hot-swap HDD cage with eight 3.5 HDD carrier, installed in the chassis
Front panel, installed in the chassis
Front Bezel for hot-swap hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Your Intel® Server System P4224IP4LHKC ships with the following items:
One Intel® Server Board S2600IP
Two CRPS 1600W power supply, installed in the chassis
Five hot-swap redundant system fans, installed in the chassis
24*2.5'' hot-swap HDD cage with twenty four 2.5 HDD carrier, installed in the chassis
Front panel, installed in the chassis
Front Bezel for hot-swap hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
2 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
3
Feature
P4308IP4LHGC
P4308IP4LHJC (L)
P4308IP4LHKC
Dimensions
438mm high
173mm wide
697mm deep
Hard Drives
8*3.5 hot-swap driver cage
Peripherals
Three multi-mount 5.25'' peripheral bays
Control Panel
(dependent on
option selected)
Front Panel
Intel® Local Control Panel (Optional)
LEDs and displays
(dependent on
option selected)
With Front Panel
o NIC1 Activity
o NIC2 Activity
o NIC3 Activity
o NIC4 Activity
o Power/Sleep
o System Status
o System Chassis Identification
o Hard Drive Activity
Power Supply
Two hot-swap 750W
common redundant power
supply
Two hot-swap 1200W common
redundant power supply
Two hot-swap 1600W
common redundant power
supply
Fans
Five hot-swap system fans
USB 2.0
Two front panel USB ports with Front Panel
Intel® Server System P4000IP and Intel® Workstation System Overview
Your Intel® Server System P4216IP4LHKC ships with the following items:
One Intel® Server Board S2600IP
Two CRPS 1600W power supply, installed in the chassis
Five hot-swap redundant system fans, installed in the chassis
16*2.5'' hot-swap HDD cage with sixteen 2.5 HDD carrier, installed in the chassis
Front panel, installed in the chassis
Front Bezel for hot-swap hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
Your Intel® Server System P4308IP4LHKC ships with the following items:
One Intel® Server Board S2600IP
Two CRPS 1600W power supply, installed in the chassis
Five hot-swap redundant system fans, installed in the chassis
8*3.5'' hot-swap HDD cage with eight 3.5 HDD carrier, installed in the chassis
Front panel, installed in the chassis
Front Bezel for hot-swap hard drive, EMI shield, 5.25'' bay filler
Pre-routing cables
Two heat sinks
The following table summarizes the features for all System combinations:
Table 1. Intel® Server System P4000IP Hot-Swap 3.5 HDDs and Non-HDD configuration base
feature
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Feature
P4308IP4LHGC
P4308IP4LHJC (L)
P4308IP4LHKC
Four Back panel USB ports
Video
One rear panel video port
Feature
P4208IP4LHGC
P4216IP4LHJC
P4216IP4LHKC
P4224IP4LHKC
Dimensions
438mm high
173mm wide
697mm deep
Hard Drives
One 8x2.5'' Hot-
swap HDD cage
support up to
8x2.5'' hot-swap
HDDs
Two 8x2.5'' Hot-
swap HDD cage
support up to
16x2.5'' hot-swap
HDDs
Two 8x2.5'' Hot-
swap HDD cage
support up to
16x2.5'' hot-swap
HDDs
Three 8x2.5'' Hot-
swap HDD cage
support up to
24x2.5'' hot-swap
HDDs
Peripherals
Three multi-mount 5.25'' peripheral bays
one multi-mount
5.25'' peripheral
bays
Control Panel
(dependent on
option selected)
Front Panel
Intel® Local Control Panel (Optional)
LEDs and displays
(dependent on
option selected)
With Front Panel
o NIC1 Activity
o NIC2 Activity
o NIC3 Activity
o NIC4 Activity
o Power/Sleep
o System Status
o System Chassis Identification
o Hard Drive Activity
Power Supply
Two hot-swap 750W
common redundant
power supply
Two hot-swap
1200W common
redundant power
supply
Two hot-swap
1600W common
redundant power
supply
Two hot-swap
1600W common
redundant power
supply
Fans
Five hot-swap system fans
USB 2.0
Two front panel USB ports with Front Panel
Four Back panel USB ports (depending on server/workstation board)
Video
One rear panel video port
Feature
P4304CR2LFGN
P4304CR2LFJN(L)
P4304CR2LFKN
Dimensions
17.2 inches high
6.8 inches wide
25 inches deep (without bezel: 24.5 inches)
Hard Drives
Four Fixed 3.5'' HDDs tray
Peripherals
Three multi-mount 5.25 peripheral bays
Control Panel
(dependent on
Front Panel
Intel® Local Control Panel (Optional)
Intel® Server System P4000IP and Intel® Workstation System Overview
Table 2. Intel® Server System P4000IP Hot-Swap 2.5 HDDs configuration base feature
Table 3. Intel® Workstation System P4000CR Fixed 3.5 HDDs configuration base feature
4 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
5
Feature
P4304CR2LFGN
P4304CR2LFJN(L)
P4304CR2LFKN
option selected)
LEDs and displays
(dependent on
option selected)
With Front Panel
o NIC1 Activity
o NIC2 Activity
o NIC3 Activity (no functional)
o NIC4 Activity (no functional)
o Power/Sleep
o System Status
o System Chassis Identification
o Hard Drive Activity
Power Supply
Two hot-swap 750W common
redundant power supply
Two hot-swap 1200W
common redundant power
supply
Two hot-swap 1600W
common redundant power
supply
Fans
One fixed system CPU zone fan
One fixed system PCI zone fan
USB 2.0 and USB
3.0
Two front panel USB ports with Front Panel
Two Back panel USB ports
Two Back panel USB 3.0 ports
Video
One onboard internal video header
Intel® Server System P4000IP and Intel® Workstation System Overview
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.1 Intel® Server System P4208IP4LHGC View
A. 750W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Hot swap system fan 5
M. Front panel
N. Hot swap system fan 4
O. 5.25'' peripheral bays
P. Hot swap system fan 3
Q. One 8x2.5'' Hot-swap HDD Cage
R. Hot swap system fan 2
S. Hot swap system fan 1
T. Air duck
U. PCI card retainer
Figure 1. Internal Chassis View of Intel® Server System P4208IP4LHGC
6 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
7
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.2 Intel® Server System P4216IP4LHJC View
A. 1200W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Hot swap system fan 5
M. Front panel
N. Hot swap system fan 4
O. 5.25'' peripheral bays
P. Hot swap system fan 3
Q. Air duck
R. Hot swap system fan 2
S. Hot swap system fan 1
T. Two 8x2.5'' Hot-swap HDD Cage
U. PCI card retainer
Figure 2. Internal Chassis View of Intel® Server System P4216IP4LHJC
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.3 Intel® Server System P4216IP4LHKC View
A. 1600W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Hot swap system fan 5
M. Front panel
N. Hot swap system fan 4
O. 5.25'' peripheral bays
P. Hot swap system fan 3
Q. Air duck
R. Hot swap system fan 2
S. Hot swap system fan 1
T. Two 8x2.5'' Hot-swap HDD Cage
U. PCI card retainer
Figure 3. Internal Chassis View of Intel® Server System P4216IP4LHKC
8 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
9
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.4 Intel® Server System P4224IP4LHKC View
A. 1600W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Hot swap system fan 5
M. Front panel
N. 5.25'' peripheral bays
O. Hot swap system fan 4
P. Hot swap system fan 3
Q. Air duck
R. Hot swap system fan 2
S. Hot swap system fan 1
T. Three 8x2.5'' Hot-swap HDD Cage
U. PCI card retainer
Figure 4. Internal Chassis View of Intel® Server System P4224IP4LHKC
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.5 Intel® Server System P4308IP4LHGC View
A. 750W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Hot swap system fan 5
M. Front panel
N. Hot swap system fan 4
O. 5.25'' peripheral bays
P. Hot swap system fan 3
Q. One 8x3.5'' Hot-swap HDD Cage
R. Hot swap system fan 2
S. Hot swap system fan 1
T. Air duck
U. PCI card retainer
Figure 5. Internal Chassis View of Intel® Server System P4308IP4LHGC
10 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
11
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.6 Intel® Server System P4308IP4LHJC(L) View
A. 1200W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Hot swap system fan 5
M. Front panel
N. Hot swap system fan 4
O. 5.25'' peripheral bays
P. Hot swap system fan 3
Q. One 8x3.5'' Hot-swap HDD Cage
R. Hot swap system fan 2
S. Hot swap system fan 1
T. Air duck
U. PCI card retainer
Figure 6. Internal Chassis View of Intel® Server System P4308IP4LHJC
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.7 Intel® Server System P4308IP4LHKC View
A. 1600W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Hot swap system fan 5
M. Front panel
N. Hot swap system fan 4
O. 5.25'' peripheral bays
P. Hot swap system fan 3
Q. One 8x3.5'' Hot-swap HDD Cage
R. Hot swap system fan 2
S. Hot swap system fan 1
T. Air duck
U. PCI card retainer
Figure 7. Internal Chassis View of Intel® Server System P4308IP4LHKC
12 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
13
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.8 Intel® Workstation System P4304CR2LFGN View
A. 750W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Front panel
M. CPU zone system fan(fan 2)
N. 5.25'' peripheral bays
O. Air duck
P. PCI zone system fan(fan 1)
Q. Fixed Hard driver carrier tray
R. PCI card retainer
Figure 8. Internal Chassis View of Intel® Workstation System P4304CR2LFGN
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.9 Intel® Workstation System P4304CR2LFJN(L) View
A. 1200W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Front panel
M. CPU zone system fan(fan 2)
N. 5.25'' peripheral bays
O. Air duck
P. PCI zone system fan(fan 1)
Q. Fixed Hard driver carrier tray
R. PCI card retainer
Figure 9. Internal Chassis View of Intel® Workstation System P4304CR2LFJN
14 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
15
Intel® Server System P4000IP and Intel® Workstation System Overview
1.1.10 Intel® Workstation System P4304CR2LFKN View
A. 1600W CRPS Power supply
B. AC Input Power connecotor
C. I/O ports
D. Serial port knockout
E. A Kensington cable lock mounting hole
F. PCI Add-in card slot covers
G. IO module slot cover
H. Alternate knockout
I. Opening for SPDIF cable
J. Padlock loop
K. RMM4 knockout
L. Front panel
M. CPU zone system fan(fan 2)
N. 5.25'' peripheral bays
O. Air duck
P. PCI zone system fan(fan 1)
Q. Fixed Hard driver carrier tray
R. PCI card retainer
Figure 10. Internal Chassis View of Intel® Workstation System P4304CR2LFKN
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
Intel® Server System P4000IP and Intel® Workstation System Overview
1.2 Chassis dimensions
Length:
656 mm (without bezel)
698.3 mm (with bezel)
Height:
438 mm
Width:
173 mm
1.3 Front control panel feature Overview
This Front Control Panel conforms to SSI specification with one exception that up to 4 LAN
act/link LEDs are supported. The common front panel can support either the standard SSI 2x12
cable interconnect (2 LAN ports) or an Intel customized 2x15 cable interconnect (4 LAN ports).
The Front Control Panel has the following features:
Power button with integrated power LED (green)
System ID with integrated ID LED (blue)
System Status LED (green/amber)
System Reset button
HDD activity LED
4 NIC activity/link LEDs
NMI button
Two USB ports
1.3.1 Front Control Panel LED/Button Functionality
The following figure shows the layout of Front Control Panel:
Figure 11. Front Control Panel LED/Button Arragement
16 Intel order number G38159-001 Revision 1.0
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
17
State
Power
Mode
LED
Description
Power-off
Non-ACPI
Off
System power is off, and the BIOS has not initialized the chipset.
Power-on
Non-ACPI
On
System power is on
S5
ACPI
Off
Mechanical is off, and the operating system has not saved any context
to the hard disk.
S4
ACPI
Off
Mechanical is off. The operating system has saved context to the hard
disk.
S3-S1
ACPI
Slow blink1
DC power is still on. The operating system has saved context and
gone into a level of low-power state.
S0
ACPI
Steady on
System and the operating system are up and running.
Intel® Server System P4000IP and Intel® Workstation System Overview
ID Button with integrated ID LED – Toggles the integrated ID LED and the Blue server board
ID LED on and off. The ID LED is used to identify the system for maintenance when installed in
a rack of similar server systems. The ID LED can also be toggled on and off remotely using the
IPMI “Chassis Identify” command which will cause the LED to blink for 15 seconds.
NMI Button – When the NMI button is pressed, it puts the server in a halt state and issues a
non-maskable interrupt (NMI). This can be useful when performing diagnostics for a given issue
where a memory download is necessary to help determine the cause of the problem. To
prevent an inadvertent system halt, the actual NMI button is located behind the Front Control
Panel faceplate where it is only accessible with the use of a small tipped tool like a pin or paper
clip.
Network Activity LEDs (NIC LED) – The Front Control Panel includes an activity LED indicator
for each on-board Network Interface Controller (NIC). When a network link is detected, the LED
will turn on solid. The LED will blink once network activity occurs at a rate that is consistent with
the amount of network activity that is occurring.
System Reset Button – When pressed, this button will reboot and re-initialize the system.
System Status LED – The System Status LED is a bi-color (Green/Amber) indicator that
shows the current health of the server system. The system provides two locations for this
feature; one is located on the Front Control Panel, the other is located on the back edge of the
server board, viewable from the back of the system. Both LEDs are tied together and will show
the same state. The System Status LED states are driven by the on-board platform
management sub-system.
System Power Button with power LED – Toggles the system power on and off. This button
also functions as a sleep button if enabled by an ACPI compliant operating system. Pressing
this button will send a signal to the iBMC, which will either power on or power off the system.
The integrated LED is a single color (Green) and is capable of supporting different indicator
states as defined in the following table.
Table 4. Power/Sleep LED Functional States
HDD Activity LED - The drive activity LED on the front panel indicates drive activity from the
on-board hard disk controllers. The server board also provides a header giving access to this
LED for add-in controllers.
Revision 1.0 Intel order number G38159-001
Intel® Server System P4000IP and Intel® Workstation System P4000CR Family TPS
LED
Color
Condition
What It Means
Power/Sleep
Green
On
Power on or S0 sleep.
Green
Blink
S1 sleep or S3 standby only for workstation baseboards.
Off
Off (also sleep S4/S5 modes).
Status
Green
On
System ready/No alarm.
Green
Blink
System ready, but degraded: redundancy lost such as PS
or fan failure; non-critical temp/voltage threshold; battery
failure; or predictive PS failure.
Amber
On
Critical alarm: Voltage, thermal, or power fault; CPU
missing; insufficient power unit redundancy resource offset
asserted.
Amber
Blink
Non-Critical failure: Critical temp/voltage threshold; VDR hot
asserted; min number fans not present or failed.
Off
AC power off: System unplugged.
AC power on: System powered off and in standby, no prior
degraded/non-critical/critical state.
Global HDD Activity
Green
Blink
HDD access.
Off
No access and no fault.
LAN 1-4 Activity/Link
Green
On
LAN link
Green
Blink
LAN access.
Off
Idle.
Chassis Identification
Blue
On
Front panel chassis ID button pressed.
Blue
Blink
Unit selected for identification by software.
Off
No identification.
Intel® Server System P4000IP and Intel® Workstation System Overview
USB Ports – In addition, the front panel provides two USB ports. The USB ports are cabled to
the 2x5 connector on the server board.
1.3.2 Front Control Panel LED Status
The following table provides a description of each LED status.
Table 5. Front Control Panel LED Status
18 Intel order number G38159-001 Revision 1.0
Loading...
+ 82 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.