Intel BLKDP35DPM, DP35DP, DP35DPM Product Manual

Intel® Desktop Board DP35DP Product Guide

Order Number: D87462-003

Revision History

Revision Revision History Date

-001 First release of the Intel® Desktop Board DP35DP Product Guide April 2007

-002 Second release of the Intel® Desktop Board DP35DP Product Guide May 2007

-003 Third release of the Intel® Desktop Board DP35DP Product Guide January 2008

If an FCC declaration of conformity marking is present on the board, the following statement applies:

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124

1-800-628-8686 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to operate the equipment.

Tested to comply with FCC standards for home or office use.

Canadian Department of Communications Compliance Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par le ministére des Communications du Canada.

Disclaimer

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

Desktop Board DP35DP may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be obtained from Intel Corporation by going to the World Wide Web site at: http://www.intel.com/ or by calling 1-800-548-4725.

Intel, Pentium, and Celeron are registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS

Preface

This Product Guide gives information about board layout, component installation, BIOS update, and regulatory requirements for Intel

Desktop Board DP35DP.

Intended Audience

The Product Guide is intended for technically qualified personnel. It is not intended for general audiences.

Use Only for Intended Applications

All Intel Desktop Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel.

Document Organization

The chapters in this Product Guide are arranged as follows: 1 Desktop Board Features: a summary of product features 2 Installing and Replacing Desktop Board Components: instructions on how to install

the Desktop Board and other hardware components 3 Updating the BIOS: instructions on how to update the BIOS 4 Configuring for RAID (Intel

configuring your system for RAID 5 Configuring for Intel

your system for Intel Rapid Recover Technology A Error Messages and Indicators: information about BIOS error messages and beep

codes B Regulatory Compliance: safety and EMC regulations and product certifications

Matrix Storage Technology): information about

Rapid Recover Technology: information about configuring

iii

Intel Desktop Board DP35DP Product Guide

Conventions

The following conventions are used in this manual:

CAUTION

Cautions warn the user about how to prevent damage to hardware or loss of data.

NOTE

Notes call attention to important information.

Terminology

The table below gives descriptions of some common terms used in the product guide.

Term Description

GB Gigabyte (1,073,741,824 bytes) GHz Gigahertz (one billion hertz) KB Kilobyte (1024 bytes) MB Megabyte (1,048,576 bytes) Mbit Megabit (1,048,576 bits) MHz Megahertz (one million hertz)

Box Contents

• Intel Desktop Board DP35DP

• I/O shield

• One ATA-66/100 cable

• Two locking Serial ATA (SATA) cables

• External SATA (eSATA) Port adapter bracket

• Quick Reference poster

• Configuration and battery caution statement labels

• Intel

Matrix Storage Technology Raid Driver diskette

Express Installer Driver and Software DVD-ROM

Contents

1 Desktop Board Features

Supported Operating Systems..............................................................................10

Desktop Board Components.................................................................................11

Processor..........................................................................................................13

Main Memory.....................................................................................................13

Intel

P35 Express Chipset..................................................................................14

Audio Subsystem ...............................................................................................15

Legacy Input/Output (I/O) Controller....................................................................15

LAN Subsystem .................................................................................................16

RJ-45 LAN Connector LEDs...........................................................................16

Hi-Speed USB 2.0 Support ..................................................................................17

Enhanced IDE Interface ......................................................................................17

Serial ATA.........................................................................................................18

Serial ATA RAID .........................................................................................18

Intel

Rapid Recover Technology ..................................................................18

Expandability.....................................................................................................18

BIOS................................................................................................................19

Serial ATA and IDE Auto Configuration...........................................................19

PCI and PCI Express* Auto Configuration.......................................................19

Security Passwords.....................................................................................19

Hardware Management Features ..........................................................................20

Hardware Monitoring and Fan Speed Control ..................................................20

Chassis Intrusion........................................................................................20

Power Management Features ...............................................................................21

ACPI.........................................................................................................21

Hardware Support ......................................................................................21

Power Connectors ...............................................................................21

Fan Headers .......................................................................................22

LAN Wake Capabilities..........................................................................22

Instantly Available PC Technology..........................................................22

+5 V Standby Power Indicator LED ........................................................23

Wake from USB ..................................................................................23

PME# Signal Wake-up Support..............................................................24

WAKE# Signal Wake-up Support ...........................................................24

ENERGY STAR* Capable ..............................................................................24

Speaker............................................................................................................24

Battery.............................................................................................................24

Real-Time Clock.................................................................................................24

2 Installing and Replacing Desktop Board Components

Before You Begin ...............................................................................................25

Installation Precautions.......................................................................................26

Prevent Power Supply Overload ....................................................................26

Observe Safety and Regulatory Requirements.................................................26

Installing the I/O Shield ......................................................................................27

Installing and Removing the Desktop Board ...........................................................28

Installing and Removing a Processor.....................................................................29

Intel Desktop Board DP35DP Product Guide

Installing a Processor ..................................................................................29

Installing the Processor Fan Heat Sink ...........................................................32

Connecting the Processor Fan Heat Sink Cable................................................33

Removing the Processor ..............................................................................34

Installing and Removing Memory..........................................................................34

Guidelines for Dual Channel Memory Configuration..........................................35

Two or Four DIMMs .............................................................................35

Three DIMMs ......................................................................................36

Installing DIMMs ........................................................................................37

Removing DIMMs........................................................................................39

Installing and Removing a PCI Express x16 Card ....................................................40

Installing a PCI Express x16 Card .................................................................40

Removing the PCI Express x16 Card..............................................................41

Connecting the IDE Cable....................................................................................42

Connecting the Serial ATA (SATA) Cables ..............................................................44

Installing the External Serial ATA Adapter Bracket ..................................................45

Connecting to the Internal Headers ......................................................................46

Connecting to the HD Audio Link Header........................................................47

Connecting to the IEEE 1394a Header ...........................................................47

Installing a Front Panel Audio Solution for Intel

High Definition Audio ...............47

Connecting to the Consumer IR (CIR) Headers................................................48

Connecting to the Serial Port Header.............................................................49

Connecting to the Chassis Intrusion Header....................................................49

Connecting to the Alternate Front Panel Power LED Header...............................49

Connecting to the Front Panel Header............................................................50

Connecting to the USB 2.0 Headers...............................................................50

Connecting to the Flexible Audio System ...............................................................51

Connecting Chassis Fan and Power Supply Cables...................................................52

Connecting Chassis Fan Cables.....................................................................52

Connecting Supply Power Cables ..................................................................53

Setting the BIOS Configuration Jumper .................................................................54

Clearing Passwords ............................................................................................55

Replacing the Battery .........................................................................................56

3 Updating the BIOS

Updating the BIOS with the Intel Updating the BIOS with the ISO Image BIOS Update File or the Iflash Memory

Update Utility...............................................................................................62

Obtaining the BIOS Update File ....................................................................62

Updating the BIOS with the ISO Image BIOS Update File .................................62

Updating the BIOS with the Iflash Memory Update Utility .................................63

Recovering the BIOS...................................................................................64

Express BIOS Update Utility.................................61

4 Configuring for RAID (Intel® Matrix Storage Technology)

Configuring the BIOS for Intel Matrix Storage Technology ................................65

Creating Your RAID Set ...............................................................................65

Loading the Intel Matrix Storage Technology RAID Drivers and Software ............66

Setting Up a “RAID Ready” System ...............................................................66

Contents

5 Configuring for Intel® Rapid Recover Technology

Enabling Intel Rapid Recover Technology...............................................................67

Creating a Recovery Volume................................................................................68

Creating a Recovery Volume Using the RAID Option ROM .................................68

Creating a Recovery Volume Using the Intel Matrix Storage Console ..................68

Disk Synchronization Mode..................................................................................69

Mounting the Recovery Disk ................................................................................69

A Error Messages and Indicators

BIOS Beep Codes...............................................................................................71

BIOS Error Messages..........................................................................................71

B Regulatory Compliance

Safety Regulations .............................................................................................73

Place Battery Marking .................................................................................73

European Union Declaration of Conformity Statement..............................................74

Product Ecology Statements ................................................................................76

Recycling Considerations .............................................................................76

Lead-Free Desktop Board.............................................................................78

EMC Regulations ................................................................................................80

Ensure Electromagnetic Compatibility (EMC) Compliance..................................81

Product Certifications..........................................................................................82

Board-Level Certification Markings ................................................................82

Chassis and Component Certifications............................................................83

Figures

1. Desktop Board DP35DP Components ...............................................................11

2. LAN Connector LEDs .....................................................................................16

3. Location of the Standby Power Indicator ..........................................................23

4. Installing the I/O Shield ................................................................................27

5. Desktop Board DP35DP Mounting Screw Hole Locations .....................................28

6. Lift the Socket Lever.....................................................................................29

7. Lift the Load Plate.........................................................................................30

8. Remove the Protective Socket Cover ...............................................................30

9. Remove the Processor from the Protective Processor Cover ................................31

10. Install the Processor .....................................................................................31

11. Close the Load Plate .....................................................................................32

12. Connecting the Processor Fan Heat Sink Cable to the Processor Fan Header..........33

13. Dual Channel Memory Configuration with Two DIMMs ........................................35

14. Dual Channel Memory Configuration with Four DIMMs........................................35

15. Dual Channel Memory Configuration with Three DIMMs......................................36

16. Use DDR2 DIMMs .........................................................................................37

17. Installing a DIMM .........................................................................................38

18. Installing a PCI Express x16 Card ...................................................................40

19. Removing a PCI Express x16 Card ..................................................................41

20. Connecting the IDE Cable ..............................................................................43

21. Connecting a Serial ATA Cable........................................................................44

22. Connecting the External Serial ATA Adapter Bracket ..........................................45

23. Internal Headers ..........................................................................................46

24. Back Panel Audio Connectors .........................................................................51

25. Location of the Chassis Fan Headers................................................................52

vii

Intel Desktop Board DP35DP Product Guide

26. Connecting Power Supply Cables ....................................................................53

27. Location of the BIOS Configuration Jumper Block ..............................................54

28. Removing the Battery ...................................................................................60

Tables

1. Feature Summary.......................................................................................... 9

2. Desktop Board DP35DP Components ...............................................................12

3. LAN Connector LEDs .....................................................................................17

4. HD Audio Link Header Signal Names ...............................................................47

5. IEEE 1394a Signal Header Names...................................................................47

6. Front Panel Intel High Definition Audio Header Signal Names ..............................47

7. Front Panel CIR Receiver (Input) Header Signal Names......................................48

8. Back Panel CIR Header Emitter (Output) Header Signal Names ...........................48

9. Serial Port Header Signal Names.....................................................................49

10. Chassis Intrusion Header...............................................................................49

11. Alternate Front Panel Power LED Header..........................................................49

12. Front Panel Header .......................................................................................50

13. USB 2.0 Header Signal Names........................................................................50

14. Jumper Settings for the BIOS Setup Program Modes..........................................55

15. Beep Codes .................................................................................................71

16. BIOS Error Messages ....................................................................................71

17. Safety Regulations........................................................................................73

18. Lead-Free Board Markings .............................................................................79

19. EMC Regulations...........................................................................................80

20. Product Certification Markings ........................................................................82

viii

1 Desktop Board Features

This chapter briefly describes the features of Intel® Desktop Board DP35DP. Table 1 summarizes the major features of the Desktop Board.

Table 1. Feature Summary

Form Factor

Processor Support for an Intel® processor in the LGA775 package Main Memory

Chipset Intel® P35 Express Chipset consisting of:

Graphics One PCI Express* x16 connector supporting PCI Express graphics

Audio

Expansion Capabilities

Legacy I/O Support

Peripheral Interfaces

ATX (320.04 millimeters [11.60 inches] x 243.84 millimeters [9.60 inches])

• Four 240-pin, DDR2 1.8 V (only) SDRAM Dual Inline Memory Module

(DIMM) sockets

• 800/667 MHz single or dual channel DDR2 SDRAM interface

• Support for up to 8 GB of system memory

• Intel P35 Express Chipset Memory Controller Hub (MCH)

• Intel

cards

• 8-channel (7.1) onboard subsystem, featuring:

• HD Audio Link header

• One PCI Express x16 connector

• Three PCI Express x1 connectors

• Three PCI connectors

Legacy I/O Controller that provides:

• Consumer Infrared (CIR) support

• One serial port via an onboard header

• Up to 12 USB 2.0 ports

• Up to two IEEE 1394a ports

• Six Serial ATA (SATA) channels (3.0 Gb/s), via the ICH9R, including

• One IDE interface with ATA-66/100 support (two devices)

82801IR I/O Controller Hub (ICH9R)

― Intel ― IDT* STAC9271D audio codec

― Six ports routed to the back panel ― Six ports routed to three USB headers

― One port routed to the back panel ― One port routed to an IEEE 1394a header

one external SATA (eSATA) channel

High Definition Audio interface

continued

Intel Desktop Board DP35DP Product Guide

Table 1. Feature Summary (continued)

BIOS

Power Management

Hardware Management

LAN Support Intel® 82566DC Gigabit (10/100/1000 Mb/s) Ethernet LAN controller

• Intel

• 8 Mbit symmetrical flash memory device

• Support for SMBIOS

• Intel

• Support for Advanced Configuration and Power Interface (ACPI)

• Suspend to RAM (STR)

• Wake on USB, PCI Express, LAN, and front panel

• ENERGY STAR* capable

Hardware monitor with:

• Three fan sensing inputs used to monitor fan activity

• Intel

• Voltage sensing to detect out of range values

Platform Innovation Framework for extensible firmware

interface

Rapid BIOS Boot

Express BIOS Update

Quiet System Technology fan speed control

Related Links:

For more information about Desktop Board DP35DP, including the Technical Product Specification (TPS), BIOS updates, and device drivers, go to:

http://support.intel.com/support/motherboards/desktop/

Supported Operating Systems

The Desktop Board supports the following operating systems:

• Microsoft Windows Vista* Ultimate

• Microsoft Windows Vista Enterprise

• Microsoft Windows Vista Business

• Microsoft Windows Vista Home Premium

• Microsoft Windows Vista Home Basic

• Microsoft Windows Vista Ultimate 64-bit edition

• Microsoft Windows Vista Enterprise 64-bit edition

• Microsoft Windows Vista Business 64-bit edition

• Microsoft Windows Vista Home Premium 64-bit edition

• Microsoft Windows Vista Home Basic 64-bit edition

• Microsoft Windows* XP Media Center Edition 2005

• Microsoft Windows XP Professional

• Microsoft Windows XP Professional x64 Edition

• Microsoft Windows XP Home

Desktop Board Features

Desktop Board Components

Figure 1 shows the approximate location of the major components on Desktop Board DP35DP.

Figure 1. Desktop Board DP35DP Components

Intel Desktop Board DP35DP Product Guide

Table 2. Desktop Board DP35DP Components

Label Description

A PCI bus connector 3 B Auxiliary chassis fan header (4-pin) C PCI Express x1 connector 3 D PCI Express x1 connector 2 E High Definition Audio Link header F PCI bus connector 2 G Front panel audio header H PCI bus connector 1 I PCI Express x1 connector 1 J Speaker K PCI Express x16 connector L Back panel connectors M 12 V processor core voltage connector (2 x 2 pin) N Back panel CIR transmitter (output) header O Rear chassis fan header (3-pin) P Processor socket Q Processor fan header (4-pin) R Serial header S Front panel CIR receiver (input) header T Main power connector (2 x 12 pin) U DDR2 DIMM 0 sockets V DDR2 DIMM 1 sockets W Chassis intrusion header X Battery Y Front chassis fan header (3-pin) Z BIOS configuration jumper block AA Alternate front panel power LED header BB Front panel header CC Serial ATA connectors DD IDE connector EE High-speed USB 2.0 headers FF External SATA (eSATA) connector GG IEEE 1394a header

Desktop Board Features

Related Links:

Go to the following links for more information about:

• Desktop Board DP35DP

• Supported processors

• Audio software and utilities

• LAN software and drivers

http://www.intel.com/design/motherbd http://support.intel.com/support/motherboards/desktop

http://www.intel.com/go/findCPU http://www.intel.com/design/motherbd http://www.intel.com/design/motherbd

Processor

CAUTION

Failure to use an appropriate power supply and/or not connecting the 12 V (2 x 2 pin) power connector to the Desktop Board may result in damage to the board, or the system may not function properly.

Desktop Board DP35DP supports an Intel processor in the LGA775 package. Processors are not included with the Desktop Board and must be purchased separately. The processor connects to the Desktop Board through the LGA775 socket.

Related Links:

Go to the following page or link for more information about:

• Instructions on installing or upgrading the processor, page 29 in Chapter 2

• Supported processors for Desktop

Board DP35DP, http://www.intel.com/go/findCPU

Main Memory

NOTE

To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.

The Desktop Board supports the dual or single channel memory configurations defined below.

• Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module

(DIMM) connectors with gold-plated contacts.

Intel Desktop Board DP35DP Product Guide

• Support for:

⎯ Unbuffered, non-registered single or double-sided DIMMs ⎯ Non-ECC DDR2 memory ⎯ DIMM Type and Timings listed below:

Type Timing DDR2-800 5-5-5 or 6-6-6 only

DDR2-667 5-5-5 only

⎯ Serial Presence Detect (SPD) memory only ⎯ Memory configurations listed below:

• Up to 2.0 GB utilizing 256 Mb technology

• Up to 4.0 GB utilizing 512 Mb or 1 Gb technology

• Up to 8.0 GB utilizing 1 Gb technology

Related Links:

Go to the following links or pages for more information about:

• SDRAM specifications, http://www.intel.com/technology/memory/

• Installing memory, page 34 in Chapter 2

• Tested memory, http:

http://www.intel.com/products/motherboard/index.htm?iid=HMPAGE+Header_ 2_Product_MB

• PC Serial Presence Detect Specification,

http://www.intel.com/technology/memory/ddr/specs/dda18c32_64_128x72ag_ a.pdf

//www.cmtlabs.com/mbsearch.asp

Intel® P35 Express Chipset

The Intel P35 Express Chipset consists of the following devices:

• Intel P35 Express Chipset Memory Controller Hub (MCH) with Direct Media Interface

(DMI) interconnect

• Intel 82801IR I/O Controller Hub (ICH9R) with DMI interconnect The MCH provides interfaces to the processor, memory, PCI Express bus, and the DMI

interconnect. ICH9R is a centralized controller for the board’s I/O paths.

Related Links:

Go to the following link for more information about the Intel P35 Express Chipset:

http://developer.intel.com/products/chipsets/index.htm

Desktop Board Features

Audio Subsystem

The onboard audio subsystem consists of the following:

• Intel

• IDT STAC9271D audio codec

• Back panel audio connectors

• Onboard audio headers:

The audio subsystem supports the following features:

• Dolby* Home Theater support

• A signal-to-noise (S/N) ratio of 95 dB

• Independent multi-streaming 7.1 audio (using the back panel audio connectors)

• ADAT* optical interface support from the back panel S/PDIF optical port

ICH9R I/O controller hub

⎯ Intel High Definition audio front panel audio header ⎯ HD audio link header

and stereo (using the Intel High Definition front panel audio header)

Related Links:

Go to the following link or pages for more information about:

• Audio drivers and utilities http://support.intel.com/support/motherboards/desktop/

• Installing the front panel audio solution, page 47

• The location of au

dio connectors, Figure 24 on page 51

Legacy Input/Output (I/O) Controller

The I/O controller features the following:

• Consumer Infrared (CIR) support

• Low pin count (LPC) interface

• One serial port interface

• Serial IRQ interface compatible with serialized IRQ support for PCI systems

• Intelligent power management, including a programmable wake up event interface

• PCI power management support

Intel Desktop Board DP35DP Product Guide

LAN Subsystem

The LAN subsystem includes:

• Intel ICH9R

• Intel 82566DC Gigabit (10/100/1000 Mb/s) Ethernet LAN controller

• RJ-45 LAN connector with integrated status LEDs

The subsystem features:

• CSMA/CD protocol engine

• LAN connect interface between ICH9R and the LAN controller

• PCI bus power management

Related Links:

Go to the following link for information about LAN software and drivers:

http://support.intel.com/support/motherboards/desktop

RJ-45 LAN Connector LEDs

Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2). These LEDs indicate the statu

Figure 2. LAN Connector LEDs

s of the LAN.

Desktop Board Features

Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating.

Table 3. LAN Connector LEDs

LED LED Color LED State Indicates

A Off LAN link is not established

Blinking LAN activity is occurring B

Green

On LAN link is established

N/A Off 10 Mb/s data rate Green On 100 Mb/s data rate Yellow On 1000 Mb/s data rate

Hi-Speed USB 2.0 Support

The Desktop Board supports up to 12 USB 2.0 ports (six ports routed to the back panel and six ports routed to three internal headers) via the ICH9R. USB 2.0 ports are backward compatible with USB 1.1 devices. USB 1.1 devices will function normally at USB 1.1 speeds.

USB 2.0 support requires both an operating system and drivers that fully support USB 2.0 transfer rates. Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports to USB 1.1 operation. This may be required to accommodate operating systems that do not support USB 2.0.

Enhanced IDE Interface

The board’s IDE interface handles the exchange of information between the processor and peripheral devices such as hard disk drives and CD-ROM drives. The interface supports:

• Up to two IDE devices (such as hard drives)

• ATAPI-style devices (such as CD-ROM drives)

• Older PIO Mode devices

• Ultra DMA-33 and ATA-66/100 protocols

Intel Desktop Board DP35DP Product Guide

Serial ATA

The Desktop Board supports six Serial ATA channels (3.0 Gb/s) via ICH9R, connecting one device per channel. One channel is configured as an eSATA channel.

Serial ATA RAID

The ICH9R supports the following RAID (Redundant Array of Independent Drives) levels:

• RAID 0 - data striping

• RAID 1 - data mirroring

• RAID 0+1 (or RAID 10) - data striping and mirroring

• RAID 5 - distributed parity

For information on configuring your system for RAID using Intel Technology see Chapter 4.

Matrix Storage

Intel® Rapid Recover Technology

Intel® Rapid Recover Technology enables fast and easy recovery of your data in the event of a hard drive failure. It allows you to maintain a complete copy of your primary or master drive onto a second hard drive, the recovery drive. If the master hard drive should fail, either from a mechanical failure or the result of a virus, recovery is as simple as booting from the recovery drive. The recovery drive can be attached to your system via any standard SATA or eSATA connection.

Intel Rapid Recover Technology also provides the added benefit of allowing the recovery drive to be mounted as a read-only volume so you can quickly copy files from the recovery drive when individual files need to be recovered.

For information on configuring your system for Intel Rapid Recover Technology see Chapter 5.

Expandability

For system expansion, the Desktop Board provides the following expansion slots:

• Three PCI Express x1 connectors

• One PCI Express x16 connector

• Three PCI bus connectors

Desktop Board Features

BIOS

The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI/PCI Express and IDE auto-configuration utilities, and the video BIOS. The BIOS is stored in the Serial Peripheral Interface (SPI) Flash.

The BIOS can be updated by following the instructions on page 61 in Chapter 3.

Serial ATA and IDE Auto Configuration

If you install a Serial ATA or IDE device (such as a hard drive) in your computer, the auto-configuration utility in the BIOS automatically detects and configures the device for your computer. You do not need to run the BIOS Setup program after installing a Serial ATA or IDE device. You can override the auto-configuration options by specifying manual configuration in the BIOS Setup program.

PCI and PCI Express* Auto Configuration

If you install a PCI/PCI Express add-in card in your computer, the PCI/PCI Express auto-configuration utility in the BIOS automatically detects and configures the resources (IRQs, DMA channels, and I/O space) for that add-in card. You do not need to run the BIOS Setup program after you install a PCI/PCI Express add-in card.

Security Passwords

The BIOS includes security features that restrict whether the BIOS Setup program can be accessed and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup and for booting the computer, with the following restrictions:

• The supervisor password gives unrestricted access to view and change all Setup

options. If only the supervisor password is set, pressing <Enter> at the password prompt of Setup gives the user restricted access to Setup.

• If both the supervisor and user passwords are set, you must enter either the

supervisor password or the user password to access Setup. Setup options are then available for viewing and changing depending on whether the supervisor or user password was entered.

• Setting a user password restricts who can boot the computer. The password

prompt is displayed before the computer is booted. If only the supervisor password is set, the computer boots without asking for a password. If both passwords are set, you can enter either password to boot the computer.

Related Links:

For instructions on resetting the password, see Clearing Passwords on page 55.

Intel Desktop Board DP35DP Product Guide

Hardware Management Features

The hardware management features of Desktop Board DP35DP enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features including the following:

• Fan speed monitoring and control

• Thermal and voltage monitoring

• Chassis intrusion detection

Hardware Monitoring and Fan Speed Control

The features of the hardware monitoring and fan speed control include:

• Monitoring of power supply voltages to detect levels above and below acceptable

values

• Intel Quiet System Technology fan speed control, delivering acoustically-optimized

thermal management

NOTE

Memory must be installed in the Channel A, DIMM 0 socket to enable Intel Quiet System Technology.

• Fan speed controllers and sensors integrated into the ICH9R

• Thermal sensors in the processor, MCH, and ICH9R, plus an onboard remote sensor

NOTE

The minimum thermal reporting threshold for the MCH is 66 °C. The MCH thermal sensor will display 66 °C until its temperature rises above this point.

• Thermally monitored closed-loop fan control, for all onboard fans, that can adjust

fan speed or switch the fans off as needed

Chassis Intrusion

The board supports a chassis security feature that detects if the chassis cover has been removed. The security feature uses a mechanical switch on the chassis that can be connected to the chassis intrusion header on the Desktop Board. See Figure 23 for the location of the c

assis intrusion header.

Desktop Board Features

Power Management Features

Power management is implemented at several levels, including:

• Software support through the Advanced Configuration and Power Interface (ACPI)

• Hardware support:

⎯ Power connectors ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Instantly Available PC technology (Suspend to RAM) ⎯ +5 V standby power indicator LED ⎯ Wake from USB ⎯ Power Management Event signal (PME#) wakeup support ⎯ WAKE# signal wake-up support

• ENERGY STAR capable

ACPI

ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. The use of ACPI with the Desktop Board requires an operating system that provides full ACPI support.

Hardware Support

Power Connectors

ATX12V-compliant power supplies can turn off the computer power through system control. When an ACPI-enabled computer receives the correct command, the power supply removes all non-standby voltages.

When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (either on or off). The computer’s response can be set by using the Last Power State feature in the BIOS Setup program’s Boot menu.

The Desktop Board has two power connectors. See Figure 26 on page 53 for the location of the power co

nnectors

Intel Desktop Board DP35DP Product Guide

Fan Headers

The function/operation of the fans is as follows:

• The fans are on when the computer is in the ACPI S0 state.

• The fans are off when the computer is in the ACPI S3, S4, or S5 state.

• Each fan header is wired to a tachometer input of the hardware monitoring and

control device.

• All fan headers support closed-loop fan control that can adjust the fan speed or

switch the fan on or off as needed.

• All fan headers have a +12 V DC connection. The Desktop Board has a 4-pin processor fan header, and one 4-pin and two 3-pin

chassis fan headers.

LAN Wake Capabilities

CAUTION

For LAN wake capabilities, the 5 V standby line for the power supply must be capable of delivering adequate +5 V standby current. Failure to provide adequate standby current when using this feature can damage the power supply.

LAN wakeup capabilities enable remote wake-up of the computer through a network. The LAN subsystem monitors network traffic and upon detecting a Magic Packet* frame, it asserts a wake-up signal that powers up the computer.

Instantly Available PC Technology

CAUTIONS

For Instantly Available PC technology, the 5 V standby line for the power supply must be capable of delivering adequate +5 V standby current. Failure to provide adequate standby current when using this feature can damage the power supply and/or effect ACPI S3 sleep state functionality.

Power supplies used with this Desktop Board must be able to provide enough standby current to support the standard Instantly Available (ACPI S3 sleep state) configuration. If the standby current necessary to support multiple wake events from the PCI and/or USB buses exceeds power supply capacity, the Desktop Board may lose register settings stored in memory.

Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep state. While in the S3 sleep state, the computer will appear to be off. If the computer has a dual-colored power LED on the front panel, the sleep state is indicated by the LED turning amber. When signaled by a wake-up device or event, the computer quickly returns to its last known awake state.

Desktop Board Features

The Desktop Board supports the PCI Bus Power Management Interface Specification. Add-in cards that support this specification can participate in power management and can be used to wake the computer.

+5 V Standby Power Indicator LED

CAUTION

If the AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices.

The Desktop Board’s standby power indicator, shown in Figure 3, is lit when there is standby power still present on the board even when the computer appears to be off. For example, when this LED is lit, standby power is still present at the memory module sockets and the PCI bus connectors.

Figure 3. Location of the Standby Power Indicator

Related Links:

For more information on standby current requirements for the Desktop Board, refer to the Technical Product Specification by going to the following link, finding the product, and selecting Product Documentation from the left-hand menu:

http://support.intel.com/support/motherboards/desktop/

Wake from USB

NOTE

Wake from USB requires the use of a USB peripheral that supports Wake from USB.

USB bus activity wakes the computer from an ACPI S3 state.

Intel Desktop Board DP35DP Product Guide

PME# Signal Wake-up Support

When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S3, S4, or S5 state.

WAKE# Signal Wake-up Support

When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from an ACPI S2, S3, S4, or S5 state.

ENERGY STAR* Capable

In 2007, the US Department of Energy and the US Environmental Protection Agency revised the ENERGY STAR requirements. Intel worked directly with these two governmental agencies to define the new requirements. Currently Intel Desktop Boards are capable of meeting the new ENERGY STAR requirements depending upon system configuration.

Go to the following link for information and recommendations concerning the the new ENERGY STAR requirements: http://www3.intel.com/cd/channel/reseller/asmo-

na/eng/337748.htm.

Speaker

A speaker is mounted on the Desktop Board. The speaker provides audible error code (beep code) information during the Power-On Self-Test (POST).

Battery

A battery on the Desktop Board keeps the values in CMOS RAM and the clock current when the computer is turned off. Go to page 56 for instructions on how to replace the battery.

Real-Time Clock

The Desktop Board has a time-of-day clock and 100-year calendar. The battery on the Desktop Board keeps the clock current when the computer is turned off.

2 Installing and Replacing Desktop

Board Components

This chapter tells you how to:

• Install the I/O shield

• Install and remove the Desktop Board

• Install and remove a processor

• Install and remove memory

• Install and remove a PCI Express x16 card

• Connect the IDE and Serial ATA cables

• Install the External SATA (eSATA) adapter bracket

• Connect to the internal headers

• Connect to the flexible audio system

• Connect chassis fan and power supply cables

• Set the BIOS configuration jumper

• Clear passwords

• Replace the battery

Before You Begin

CAUTIONS

The procedures in this chapter assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.

Disconnect the computer from its power source and from any telecommunications links, networks, or modems before performing any of the procedures described in this chapter. Failure to disconnect power, telecommunications links, networks, or modems before you open the computer or perform any procedures can result in personal injury or equipment damage. Some circuitry on the board can continue to operate even though the front panel power button is off.

Follow these guidelines before you begin:

• Always follow the steps in each procedure in the correct order.

• Set up a log to record information about your computer, such as model, serial

numbers, installed options, and configuration information.

• Electrostatic discharge (ESD) can damage components. Perform the procedures

described in this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam pad. If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis.

Intel Desktop Board DP35DP Product Guide

Installation Precautions

When you install and test the Intel Desktop Board, observe all warnings and cautions in the installation instructions.

To avoid injury, be careful of:

• Sharp pins on connectors

• Sharp pins on printed circuit assemblies

• Rough edges and sharp corners on the chassis

• Hot components (such as processors, voltage regulators, and heat sinks)

• Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure that the calculated total current loads of all the modules within the computer is less than the output current rating of each of the power supplies output circuits.

Observe Safety and Regulatory Requirements

Read and adhere the instructions in this section and the instructions supplied with the chassis and associated modules. If you do not follow these instructions and the instructions provided by the chassis and module suppliers, you increase safety risk and the possibility of noncompliance with regional laws and regulations. If the instructions for the chassis are inconsistent with these instructions or the instructions for associated modules, contact the supplier’s technical support to find out how you can ensure that your computer meets safety and regulatory requirements.

Intel BLKDP35DPM, DP35DP, DP35DPM Product Manual

Specifications and Main Features

Frequently Asked Questions

User Manual