© IN-SINK-ERATOR Printed in USA Form No. C239-99E-02
IN-SINK-ERATOR
DIVISION OF EMERSON ELECTRIC COMPANY
4700 21st STREET
RACINE, WI 53406 TEL: 414 554-5432 1-800-558-5712 FAX: 414 554-8917
PROJECT: ITEM NO.:
MODEL WXC-500
SELF CONTAINED
WASTE REDUCTION SYSTEM
Consultant/Specifier Hot Line:
1-800-558-5712 ext. 3666 or 3528
ELECTRICAL SPECIFICATIONS
• 3 Phase
• 20 Amp
• Voltage/HZ:
208V 60 HZ 240V 60 HZ
460V 60 HZ 200V 50-60 HZ
Thumb Screws
for easy removal
Auger Screen
Auger*
Discharge Chute
Disposer Motor
Grinding Chamber
Hopper
On / Off Switch
Food Waste
Disposer Section
Auger Spray
Waste Exit
1/2" Copper Tube
Water Supply
Connection
1 1/2" NPT
Waste Drain
Outlet
Dewaterer Section
INCOMING WATER
DRAIN / OVERFLOW
Junction Box
9-1/4"
10 1/4"
19 1/4"
22"
PRODUCT FEATURES & SPECIFICATIONS
• Up to 85% volume reduction
• Capacity 900 pounds of waste per hour
• Designed pre-dominately for food waste
• Recommended waste mix at least 50% food waste
• Stainless steel construction
• No paper/cardboard required
• Pre-plumbed for fast reliable installation
• Easy to clean with no tools required
• Built-in silverware saver
• Water consumption 1 gallon per minute
• 5 H.P. disposer
• One year full warranty
OPTIONAL REEL RINSE UNIT
WITH SPRAY VALVE
• Convenient for cleaning pulper system
• 35 feet of 3/8" ID hose
• Install in ceiling or wall mount
• Fisher Model #2980
39 1/2"
20 13/16"
6 5/8"
64 1/4"
63"
27 1/4"
26"
7 3/16"
5 15/16"
36 11/16"
35 7/16"
8 3/4"
CONTROL PANEL
DOOR SWING
22"
15 3/4"
2"
10 1/4"
9 1/4"
15 1/2"
CONTROL PANEL
LOCATION
19 1/4"
14"
27 1/2"
19 7/8"
4 1/2"
WATER
INLET
1/2" COPPER
TUBING
DRAIN OUTLET 1 1/2 NPT
POSSIBLE
CHUTE
LOCATIONS
SELF CONTAINED WASTE REDUCTION SYSTEM
The WXC-500 can be free standing anywhere within
your kitchen or adjacent to your dish table.
Consultant/ Specifier Hot Line:
1-800-558-5712 ext. 3666 or 3528
*A minimum ceiling height of 110 inches is required to remove auger.