Instant Hot Water Dispensers
Model
UW/UWL
Point-of-use water heater & faucet in one
Dimensions
6-1/8"
1/4" Incoming
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
11
"
6-3/4"
6-5/32
"
NOTE: Max counter thickness is 1-1/2
6-1/8
"
Submittal Sheet
• Faucet blends near-boiling water from
tank and cold water from supply to provide
110°F water for hand washing and general
clean-up.
• Requires only cold water supply line to
provide both cool and warm water
• Easy-action lever with ceramic disc valve
• Easy-to-adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
™
• 1-Year We Come To You
In-Home
Service Warranty*
• UW 120 volts, 1300 watts, 10.8 amps
UWL 120 volts, 750 watts, 6.25 amps
• Available in chrome
Sample Specification
Point-of-use hot water dispenser shall be
InSinkErator UltraSystem model UW or UWL,
with 2/3-gallon stainless steel tank and 110°
water capacity of 10.8 gallions per hour (UW)
or 6.25 gallons per hour (UWL).
Warranty:
1- year parts and in-home service.
".
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
Specifications
UWLUW
Capacity
Electrical
Inlet/Outlet
Water Temp
Tank
Thermostat
Insulation
V alve
Shipping
Weight
Required
Sink Hole
Diameter
10.8 gal/hour
2/3 gallon stainless steel tank
120 volts A.C.,
1300 watts,
10.8 amp heating
element with
grounded three
(3) prong plug
Approximately
60°F/110°F
Snap-action, adjustable from 160°F
to 200°F (factory pre-set at 200°F)
Meets U.L. 94HF-1 flammability
specification
Ceramic Disc
Approximately
10.9 lbs.
1-1/4" – 1-1/2"
standard sink hole
6.25 gal/hour
120 volts A.C,
750 watts, 6.25
amp heating
element with
grounded three
(3) prong plug
Job Specifications
1-800-558-5700
www.insinkerator.com
Printed in USA HWD269-07D-45-02
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
In Sink Erator is a division of
Emerson Electric Co.
© 2007 InSinkErator