Insinkerator Pro1000LP Specsheet
®
Disposers are designed
and manufactured
in the USA with over
80% domestic content
PRO Series
Food Waste Disposers
Dimensions
10 "
11 1/3"
5 3/4"
PRO 1000LP®
Evolution Series
Superior performance in
a low profile design.
Submittal Sheet
Superior performance in
a low profile design.
• SoundSeal
®
technology delivers
quieter performance. Hold a
conversation with elevated voices
in the same room.
• MultiGrind
®
technology delivers
3 stages of grind vs. 1 stage
in standard disposer.
• Exclusive Jam-Sensor
feature. Increases motor torque
500% to automatically break through
the toughest jams.
• Includes sound-reducing
Quiet Collar
®
Sink Baffle containing
antimicrobial material.
• Made in USA exclusively for
professional plumbing contractors.
Sample Specification
Food Waste Disposer(s) shall be
InSinkErator Model PRO 1000LP
MultiGrind
technologies, 1 HP motor, Auto-Reverse
Grind System
6"
*
Grind components.
Warranty:
4"
We Come To You
Limited Warranty.
The complete InSinkErator warranty is included in the Care & Use
*
Booklet packed with each unit.
®
and SoundSeal
®
feature, Stainless Steel
®
®
Circuit
®
®
10- Year In-Home
®
with
Specifications
Type of Feed Continuous
On/Off Control Wall Switch
Motor Single Phase
HP 1
Reversing Auto-Reverse Grind
Volts 120
HZ 60
RPM 1725
Amp. (Avg. Load) 10.2
Time Rating Intermittent
Lubrication Permanently Lubricated
Shipping
Weight (Approx.) 22.5 lbs.
Unit Finish Black Enamel, Black
Overall Height 11-1/3”
SoundSeal Anti-Vibration Mount
Technology
MultiGrind GrindShear Ring
Technology TriAction Lug System
Grind Chamber
Capacity 34.6 oz.
Motor Protection Manual Reset Overload
Average Approx. 1 Gallon Per
Water Usage Person Per Day
Avg. Electrical Usage 3-4 KWh Per Year
Drain 1-1/2” Anti-Vibration
Connection (Hose Clamp)
Dishwasher
Drain Connection Yes
Anti-Vibration
®
feature
System
Upper & Lower Bearings
®
Sink Baffle
™
®
®
Tailpipe Mount
Antimicrobial Quiet
Collar
Multi-Layer SoundLimiter
Insulation
feature
Undercutter Disk
JamSensor® Circuit
®
™
™
Job Specifications
P627-15K-83-10 Printed in U.S.A. © 2015 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.
* Add 1/2” when stainless steel sinks are used.
1-800-558-5700
www.insinkerator.com
The mark of responsible forestry
BV-COC-080715
© 1996 Forest Stewardship Council A.C.
™
The Emerson logo is a trademark and service mark of
Emerson Electric Co. The mounting collar configuration
is a trademark of Emerson Electric Co. Quick Lock® is a
registered trademark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.
Loading...