InSinkErator INK10044 Specifications

Instant Hot Water Dispensers

Model

HWT-OO

The Next

Necessity

Dimensions

Stainless Steel Tank dispenses
near-boiling 200˚F water instantly

™

Water dispenser and filtration sold separately

Submittal Sheet

• 2/3-gallon stainless steel tank

• Easy to adjust temperature control

• Tool-free tank connections and dry start
protection to ease installation

• Provides 60 cups/hour of near-boiling water

• 115 volts, 750 watts, 6.5 amps

• For use with InSinkErator
instant hot water dispensers

(excludi ng mod el Hot1 and Hot 100)

Specifications

Capacity

Electrical 115 volts, A.C., 750

Thermostat

Insulation

Recommended
Supply Pressure

Shipping Weight Approximately

2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour

watts, 6.5 amp
heating element
with grounded
three (3) prong plug

Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)

Meets U.L. 94HF-1
flammability
specification

30-125 psi

5.7 lbs.

10-7/8"

6-3/4"

6-1/8"

Job Specifications

HWD492-14G-45-10

Sample Specification

Instant hot water dispenser(s) shall be
equipped with an InSinkErator Model HWT-00
stainless steel tank with adjustable
temperature from 160°F to 210°F.

We Come To You® 3-Year In-Home

Limited Warranty*

* The comp lete InSinkErato r warranty is incl uded in the Care & U se
bookl et packed with each u nit.

US Pat. D5 32,497 (tank en closure)

Certified to

NSF/ANSI 372
≤ 0.25% lead

USA
1-800-558-5700

www.insinkerator.com

Canada

1-800-558-5700

www.insinkerator.ca

Printed in USA

The Emerson logo is a trademark

and a service mark of Emerson Electric Co.

InSinkErator may make improvements and/or changes

in the specifications at any time, in its sole discretion,

without notice or obligation and further reserves the

right to change or discontinue models.

© 2014 InSinkErator, InSinkErator® is a business

unit of Emerson Electric Co. All Rights Reserved.