InSinkErator INK10001 Specifications
Food Waste Disposers
QUIET SERIES
Evolution Septic Assist
®
Dimensions
13"
6 11/ 16 "
12 5 /8 "
*Add 1/2" when stainless steel sinks are used.
4"
5 3/4 "
Job Specifications
Submittal Sheet
The ideal choice for homes with
septic systems.
• Easy Swap. Designed to fit existing
InSinkErator disposers.
• 2-Stage MultiGrind
®
Technology for
tougher food scraps like chicken bones.
• Highest Durability. Alloy stainless steel
components with LeakGuard Liner.
• Noise reduction with SoundSeal
™
®
Technology.
• Features exclusive technology that injects
Bio-Charge
®
, a natural microorganism
that helps break down food waste,
into the grind chamber.
Sample Specification
Food Waste Disposer(s) shall be
InSinkErator Model Evolution Septic Assist
with MultiGrind
technologies, 3/4 HP motor, Stainless Steel
Grind Chamber and components.
Warranty:
8- Year parts and in-home service.
The complete InSinkErator warranty is included in the Care & Use
*
Booklet packed with each unit.
*
®
and SoundSeal
Food waste is roughly 80% water.
By using your disposal regularly,
you can help divert food waste
from landfills and reduce
greenhouse gas emissions.
Make sustainability a family affair
by using your disposal. After all,
the smallest changes can make
the biggest impact.
®
Specifications
Type of Feed Continuous
On/Off Control Wall Switch
Motor Single Phase
HP 3/4
Volts 120
HZ 60
RPM 1725
Amp. (Avg. Load) 8.1
Time Rating Intermittent
Lubrication Permanently
Lubricated Upper &
Lower Bearings
Shipping
Weight (Approx.) 25.5 lbs.
Unit Finish Black Enamel
Gray
Overall Height 12-5/8"
SoundSeal Anti -Vibration Mount
Technology
Tailpipe Mount
Quiet Collar
®
SoundLimiter
MultiGrind GrindShear Ring
Technology
Injection
Mechanism Bio-Charge
Grind Chamber
Capacity 40 oz.
Motor Manual Reset
Protection Overload
Average Approx. 1 Gallon Per
Water Usage Person Per Day
Average
Electrical Usage 3-4 KWh Per Year
Drain 1-1/2" Anti-Vibration
Connection (Hose Clamp)
Dishwasher
Drain Connection Yes
Anti-Vibration
™
®
Sink Baffle
®
Insulation
®
®
®
The Emerson logo is a trademark and service mark of
Emerson Electric Co. The mounting collar configuration
InSinkErator may make improvements and/or changes
1-800-558-5700
in the specifications at any time, in its sole discretion ,
www.insinkerator.com
H90 6-19 L-64 -10 © 2020 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.
is a trademark of Emerson Electric Co.
without notice or obligation and further reserves the
right to change or discontinue models.
™
Loading...