In-Sink-Erator H-778-16 Part Manual

© IN-SINK-ERATOR Printed in USA Form No. C185-99E-02

IN-SINK-ERATOR
DIVISION OF EMERSON ELECTRIC COMPANY
4700 21st STREET
RACINE, WI 53406 TEL: [phone] FAX: [phone]

PROJECT: ITEM NO.:

MODEL H-778

Hot Water Dispenser

APPLICATION: Designed for large volume usage of
steaming hot water. Up to 100 cups of 190˚ hot water per
hour are provided by the system’s 1/2 gallon tank. Saves
time, work and water — you only heat the water you use.

FEATURES

• 1-year full warranty on parts and labor

• System provides up to 100 cups of 190˚F water per hour

• Chrome-plated faucet completely insulated from 190˚
water.

• Die-molded, high efficiency, expanded polystyrene
thermal barrier surrounds tank for low heat loss.

• Adjustable thermostat, convenient drain, thermally fused
to prevent tank damage from dry start-up or loss of water.

• Tank is always open to atmospheric pressure and requires
no relief valves.

• Spout is elevated to fill large containers.

• Stainless steel case.

SAMPLE SPECIFICATIONS

Hot Water Dispenser(s) shall be In-Sink-Erator Model
H-778 1/2-gallon capacity insulated tank with drain
plug, 1300 watt heater, instant self-closing valve,
adjustable thermostat, 1-year full warranty on parts
and labor.*

* Complete In-Sink-Erator and all parts covered is included in the

Care and Use Booklet, packed with each unit.

SPECIFICATIONS

Capacity 1/2 gallon, up to 100 cups of 190˚F

water per hour

Electrical 1300 watts, 11.3 amps, 115 volts

A.C. U.L. listed — 3-wire cord and
3-prong plug provided.

Thermostat Snap-action, adjustable from 140˚F

to 200˚F (factory pre-set at 190˚).

Insulation Meets U.L. 94HF-1 flammability

specification

Valve Instant, self-closing.
Shipping wt. 9 lbs.

6-3/8"

4-1/2"

TAP

4-3/8"

VALVE
ASSEMBL Y

4"

FITS STANDARD SIZE
SINK OPENING, OR
DRILL 1-1/4" HOLE

3 WATER LINES

TEMPERATURE

ADJUSTMENT

ATTACHED ELECTRICAL
CORD AND PLUG

6-1/16"

16"
MAXIMUM

11-13/32"

WATER INLET TUBE

(1/4" COPPER TUBE)

1/2 GALLON
TANK
ASSEMBL Y