InSinkErator COVERCONTROLPLUSWCORD Specifications
Food Waste Disposers
QUIET SERIES
Evolution Cover Control® Plus
Dimensions
10 "
9 7/16 "
16 1/ 4"
4"
5 3/4 "
*Add 1/2" when stainless steel sinks are used.
Job Specifications
Submittal Sheet
Ideal for those seeking the extra assurance
of covered operation.
• Easy Swap. Designed to fit existing
InSinkErator disposers.
• 2-Stage MultiGrind
®
Technology for
tougher food scraps like chicken bones.
• Highest Durability. Alloy stainless steel
components with LeakGuard Liner.
• Advanced Noise Reduction.
With insulated SoundSeal
• Features exclusive patent-pending
Magnetic CoverStart
®
®
Activation.
™
technology.
The cover goes in before the disposer
goes on.
Sample Specification
Food Waste Disposer(s) shall be
InSinkErator
Control
SoundSeal
Stainless Steel Grind Chamber and
components.
Warranty:
7- Year parts and in-home service.
The complete InSinkErator warranty is included in the Care & Use
*
Booklet packed with each unit.
*
®
Model Evolution Cover
®
Plus with MultiGrind® and
™
technologies, 3/4 HP motor,
Food waste is roughly 80% water.
By using your disposal regularly,
you can help divert food waste
from landfills and reduce
greenhouse gas emissions.
Make sustainability a family affair
by using your disposal. After all,
the smallest changes can make
the biggest impact.
Specifications
Type of Feed Batch Feed
On/Off Control Cover Control
Motor Single Phase
HP 3/4
Volts 120
HZ 60
RPM 1725
Amp. (Avg. Load) 9.5
Time Rating Intermittent
Lubrication Permanently
Lubricated Upper &
Lower Bearings
Shipping
Weight (Approx.) 24.4 lbs
Unit Finish Gray
Overall Height 16-1/4 "
SoundSeal Anti-Vibration Mount
Technology
Tailpipe Mount
Sink Baffle
Multi-Layer
SoundLimiter
MultiGrind GrindShear Ring
Technology
Grind Chamber
Capacity 40 oz.
Motor Manual Reset
Protection Overload
Average Approx. 1 Gallon Per
Water Usage Person Per Day
Average
Electrical Usage 3-4 KWh Per Year
Drain 1-1/2" Anti-Vibration
Connection (Hose Clamp)
Dishwasher
Drain Connection Yes
Anti-Vibration
™
®
Insulation
®
®
The Emerson logo is a trademark and service mark of
Emerson Electric Co. The mounting collar configuration
InSinkErator may make improvements and/or changes
1-800-558-5700
in the specifications at any time, in its sole discretion,
www.insinkerator.com
H943-20B -64-10 © 2020 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.
is a trademark of Emerson Electric Co.
without notice or obligation and further reserves the
right to change or discontinue models.
™
Loading...