Insinkerator CC-202D Installation Manual
DISPOSER CONTROL CENTER
Installation Manual
Model CC-202D
www.insinkerator.com
The Danger signal indicates an immediately hazardous situation which, if not
avoided, will result in death or serious injury.
The Warning signal alerts you to potential hazards or unsafe practices which, if
not avoided, could result in severe personal injury or death.
The Caution signal alerts you to hazards of unsafe practices which, if not avoided,
may result in minor personal injury or property damage.
Please be certain that the person who installs or uses this appliance carefully reads
and understands the Safety Instructions contained in this manual
Part No. 14349 - November 2007
Table of Contents
Introduction/Features/Mounting Control Center
Introduction ......................................................................................4
Features ...........................................................................................4
Mounting the Control Center............................................................4
Plumbing Connections ...................................................................................5
Electrical Connections
Electrical Connections .................................................................... 6
Time Delay Relay ..............................................................................6
Operating Instructions/Troubleshooting
Operating Instructions ......................................................................7
Troubleshooting ................................................................................7
Wiring Diagrams
Model No. CC-202D-1 (120V, 1 phase, 1/2 - 2 HP) .........................8
Model No. CC-202D-2 (208/230V, 1 phase, 1/2 - 2 HP) ..................9
Model No. CC-202D-3 (208/230V, 3 phase, 1/2 - 10 HP) ..............
Model No. CC-202D-4 (380/460V, 3 phase, 1/2 - 10 HP) ..............11
10
Warranty
FOODSERVICE DISPOSER CONTROL CENTER LIMITED WARRANTY
InSinkErator Foodservice Disposer Control Centers are warranted against defects in material and workmanship for
one year from the date of installation. The warranty includes parts and labor, provided the service is performed by an
InSinkErator Factory Authorized Service Center. This warranty does not apply if failure is due to: faulty or improper
electrical installation, faulty or improper plumbing installation, product abuse or misuse, or accidental damage.
Foodservice disposer accessories are included in this warranty only if they are included in the original disposer
purchase package.
3
Introduction/Features/Mounting the Control Center
INTRODUCTION
The CC-202D Control Center is UL® approved for use
with InSinkErator Foodservice Disposers. The control
center operates the disposer. Its main functions are:
• To start and stop the disposer.
• To reverse the direction of the disposer motor
automatically upon restart.
• To start the water flow to the disposer.
FEATURES
AUTOMATIC REVERSE
The disposer motor will reverse its direction of rotation
automatically upon restart.
ENCLOSURE
Stainless steel NEMA 4 construction.
PUSH BUTTON OPERATION
Push Black button to start disposer.
Push Red button to stop disposer.
Model Part No. Voltage Phase HP
CC-202D-1 14346 120V 1 1/2-2
CC-202D-2 14346A 208/230V 1 1/2-2
CC-202D-3 14346B 208/230V 3 1/2-10
CC-202D-4 14346C 380/460V 3 1/2-10
Table 1. Electrical Specifications
MOUNTING THE CONTROL CENTER
Use the flanges at the back of the control center
enclosure and only mount panel in the upright vertical
position (door hinge is on the left). See Figure 1.
Locate control center within sight of disposer
per local codes.
If box is mounted to the sink table, recess the box so
that the buttons do not extend beyond the table's edge.
Figure 1. Control Center Dimensions
PROPERTY DAMAGE
The Control Center should only be used with an
InSinkErator Foodservice Disposer. The Control
Center voltage and phase should match the disposer.
The disposer current and horsepower should be
equal to or less than the Control Center rating.
4
Loading...