Insinkerator CC-202 User Manual
PROJECT: ITEM NO.:
6"
CONTROL CENTER MODEL CC-202
AUTOMATIC REVERSING ACTION • DOUBLES THE LIFE OF DISPOSER GRINDING ELEMENTS
SPECIFICATIONS
STAINLESS STEEL ENCLOSURE
• NEMA 4
• Waterproof construction
• 18 gallon (68.1 liters) stainless steel
• Easy to clean and keep clean
AUTOMATIC REVERSING CONTROL
• Reverses direction of motor at each startup
• Increases cutting element life and reduces jams
REVERSING DELAY
• Disposer will not reverse while motor is in motion
• Protects motor from burn out from operator misuse
AUTOMATIC DROP OUT SYSTEM
• If a power loss occurs, control will automatically
disengage power lines
• Disposer must be restarted
VOLTAGE/PHASE AVAILABILITY
Model Voltage /Hz Phase
CC202D-1 120V, 50/60 Hz 1 Ph
CC202D-2 208-240V, 50/60 Hz 1 Ph
CC202D-3 208-240V, 50/60 Hz 3 Ph
CC202D-4 380-460V, 50/60 Hz 3 Ph
RECOMMENDED INSTALLATION
DIMENSIONS
(152.4 mm)
8"
(203.2 mm)
(273.1 mm)
10"
(254.0 mm)
10-3/4"
5-1/4"
(133.4 mm)
5-7/8"
(149.2 mm)
NOTE: The CC-202 control center should be mounted 1-1/2"
(38.1 mm) back from the front surface of the table.
4700 21st STREE T
RACINE, WI 53406
TEL: 80 0-845- 8345
FAX: 262 554-3620
www.insinkerator.com /foodservice
InSinkErator is a division of Emerson Electric Co.
Our products appear on The KCL CADalog
CD-ROM based CAD Foodservice Symbol
Librar y. More information is available from
Kochman Consultants, Ltd. at www.kclcad.com.
The Emerson logo is a
trademark and a service mark
of Emer son Electric Co.
InSink Erator ©20 11 Pr inted in USA F orm No. F194-11A-45- 02
Loading...