Insinkerator CC-101 User Manual

PROJECT: ITEM NO.:

9-7/8"

(250.8 mm)

8-1/4"

(209.6 mm)

15-3/4"

(400.1 mm)

5-5/16"

(134.9 mm)

15-1/8"

(384.2 mm)

14"

(355.6 mm)

1"

(25.4 mm)

6-3/4"

(171.5 mm)

CONTROL CENTER MODEL CC-101

WATER/ENERGY SAVING FEATURE • AUTOMATIC REVERSING ACTION

SPECIFICATIONS

STAINLESS STEEL ENCLOSURE

• NEMA 4

• Waterproof construction

• 18 gallon (68.11 liters) stainless steel

• Easy to clean and keep clean
AUTOMATIC REVERSING CONTROL

• Reverses direction of motor at each startup

• Increases cutting element life and reduces jams
REVERSING DELAY

• Disposer will not reverse while motor is in motion

• Protects motor from burn out from operator misuse
AUTOMATIC DROP OUT SYSTEM

• If a power loss occurs, control will automatically
disengage power lines

• Disposer must be restarted
DISCONNECT SWITCH

• Disconnects electrical power beyond switch for service

• Interlock with front cover
SOLID STATE CONTROL

• Operates on 24V
SOLID STATE CONTROL CIRCUIT

•

Printed circuit board with control diagnostic/function lights,

delay timers and timed run pin and reversing control
POST WATER FLUSH

• Adjustable timer allows water to run automatically for up
to 10 minutes, flushing disposer and drain lines after
disposer is shut off

TIMED RUN OR CONTINUOUS RUN

• Selected at your discretion, simply by moving the plug-in
in on the printed circuit board

•

Timed run shuts off disposer automatically after 10 minutes

• Can be shut off manually any time
SOLENOID VALVE

• Packed unattached inside control center carton

• Ensures that water is flowing into disposer while disposer
is operating

DIMENSIONS

VOLTAGE/PHASE AVAILABILITY

Model Voltage /Hz Phase Disposer Models

CC101K-1 120V, 50/ 60 Hz 1 Ph SS-50 to SS-200

CC101K-2 208-240V, 50/60 Hz 1 Ph SS-50 to SS-200

CC101K-3 208-240V, 50/60 Hz 3 Ph SS-50 to SS-1000

CC101K-4 380-460V, 50/60 Hz 3 Ph SS-50 to SS-1000

4700 21st STREET
RACINE, WI 53406
TEL: [phone]
FAX: [phone]

www.insinkerator.com

InSinkErator is a division of Emerson Electric Co.

Our products appear on The KCL CADalog
CD-ROM based CAD Foodservice Symbol
Library. More information is available from

Kochman Consultants, Ltd.

The Emerson logo is a trademark and a

service mark of Emerson Electric Co.

InSinkErator ©2008 Printed in USA Form No. F193-08J-45-02

at www.kclcad.com.

RECOMMENDED INSTALLATION

NOTE: The CC-101 control center should be mounted 1-1/2" (38.1 mm) back from the front surface of the table.