In-Sink-Erator C1300 General Manual
PROJECT:
ITEM NO.:
APPLICATION: Designed for large volume usage of
steaming hot water. Up to 100 cups of 200˚ hot water pe
hour are provided by the system’s 2/3 gallon tank. Saves
time, work and water — you only heat the water you use.
FEATURES
• Foodservice grade heating element provides
100 cups of near-boiling water per hour
• Swiveling gooseneck spout travels 90° to provide
clearance for large vessels
• Easy-action lever with automatic shut-off
• Durable all brass faucet with polished chrome finish
• 2/3 gallon Stainless Steel Tank construction for longer life
• Easy-to-adjust temperature control on front panel
• Mounts in standard sink opening or 1-1/4" drilled hole
• Tool-free tank connections and dry start protection
for easy installation
• 1-year full warranty on parts and labor
r
MODEL C1300
Hot Water Dispenser
9-7/8"
UNIT DEPTH
6-3/4" MA
X
7"
14-1/2" MAX
11
"
1
/
2
5
1-1/4"
TO
1-1/2"
HOLE
INLET
TUBE
4-3/8"
MIN.
"
WATER PASSAGE
DISPENSER
R
LEVE
3" MAX.
MATERIAL
THICKNESS
SPECIFICATIONS
Capacity 2/3 gallon tank dispenses
100 cups of 200ºF water per hour
FLEXIBLE
OUTLET TUBE
Electrical 120 volts A.C., 1300 watts,
10.8 amp heating element with
1/4" INCOMING
WATER SUPPL
Y
36" cord and grounded plug
Thermostat Snap action, adjustable fro
m
160°F to 210ºF (factory pre-set
FLEXIBLE
VENT TUBE
at approximately 200°F)
Insulatio
n Meets U.L. 94HF-1
flammability specification
2/3 GALLON
TANK (2.5 LITERS)
ADJUSTABL
THERMOSTAT
E
Valve Instant, self-closing
Recommended
Supply Pressure 30-125 ps
i
6-1/8"
4700 21st STREE
RACINE, WI 53406
TEL: 800-845-8345
FAX: 262-554-3620
www.insinkerator.com
InSinkErator is a division of Emerson Electric Co.
Shipping Weight Approximately 11.5 lbs.
DRAIN PLUG
To ensure optimum performance, maximum distanc
e
between tank and dispenser head should be 16" or less
T
The Emerson logo is a
trademark and a
service mark of
Emerson Electric Co
© InSinkErator Printed in USA Form No.F294-06E-19-02
.
Loading...