Insignia NS-LTDVD26-09 User Manual [en, es]

User Guide | Guía del Usuario
26” LCD TV/DVD Combo
Combo TV LCD/reproductor de DVD de 26"
NS-LTDVD26-09

Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

Contents

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Connecting an antenna, cable TV, or satellite TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a standard video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a component video device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a digital audio input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the basic controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the TV on and off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the video mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Selecting the TV signal source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Using the on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Memorizing channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Manually showing or hiding a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Viewing channel information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adding favorite channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Using the Electronic Program Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Changing the channel settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Adding a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting other settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the parental controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PC input signal chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Changing your computer's video resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using the DVD player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Playing an audio CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using DVD repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using CD repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using a DVD title menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using a DVD menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Searching for a DVD title or chapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Searching for a specified time on a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Searching for a specified time on a CD track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing the DVD audio language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Turning DVD subtitle on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Selecting the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Changing the DVD display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Turning the screen saver on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Using DVD last memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Setting up DVD speaker output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setting up DVD Dolby Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the DVD equalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting up DVD 3D sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Setting DVD video options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Setting a DVD parental password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing DVD preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Maintaining your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Introduction

Congratulations on your purchase of a high-quality Insignia product. Your NS-LTDVD26-09 represents the state of the art in television and DVD player design, and is designed for reliable and trouble-free performance.
www.insignia-products.com
3
f
It makes a difference how and where you use
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
CHILD SAFETY
your flat panel display
As you enjoy your new product, keep
these safety tips in mind
Tune into safety
One size of TV stand does not fit all. Use only a TV
stand rated for the weight of your TV.
Carefully read and understand all enclosed
instructions for proper use of this product.
Don’t let children to climb on or play with
entertainment system furniture and TVs.
Don’t place TVs on furniture that can easily be used
as steps, such as a chest of drawers.
Remember that children can become excited while
watching a program, especially on a “larger-than-life” TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.
Make sure that you route all cords and cables so that
they cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always:
One size of wall mount does not fit all. Use only a wall mount rated for the weight
of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory (such as UL, CSA, or ETL) as suitable for your TV.
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help
from a professional installer.
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer.
TVs can be heavy. At least two people are required for safe wall mount installation.
4
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

Safety information

Warning
To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose your TV to rain or moisture.
Caution
To prevent electric shock, match the wide blade on the power cord plug to the wide slot on an electric outlet. If the plug does not fit, consult a licensed electrician to replace the obsolete outlet. Do not modify the power cord plug, or you will defeat this safety feature.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.

Laser safety

Your TV employs a laser. Only a qualified service person should remove the cover or attempt to service your TV because of possible eye injury.
Warnings
• Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
• Visible and invisible laser radiation is present when open and interlock defeated.
• Do not stare into beam.
• The laser is located inside, near the deck mechanism.
• The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• Always place the TV on the floor or a sturdy, level, stable surface that will support the weight of the unit.
• Installing the TV requires special skill that should only be performed by qualified service personnel.
• Customers should not attempt to do the work themselves. Insignia bears no responsibility for improper mounting or mounting that results in accident or injury.
Caution
The AC power plug is used as the disconnect device, so the AC power plug shall always remain readily operable.

Read instructions

Read all of the safety and operating instructions before you use your TV.

Retain instructions

Retain safety and operating instructions for future reference.

Follow warnings and instructions

Follow all warnings on your TV and in the operating instructions. Follow all operating and use instructions.

Water and moisture

Do not use your TV near water. For example, do not use it near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.

Cleaning

Unplug your TV before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth to clean the exterior of your TV.

Ventilation

Slots and openings in the cabinet and the back or bottom are provided for ventilation, reliable operation, and protection from overheating. These openings must not be blocked or covered. Do not block the openings by placing your TV on a bed, sofa, rug, or other similar surface. Do not place your TV near or over a radiator or heat register. Do not place your TV in a built-in installation, such as a bookcase or rack, unless you provide correct ventilation or follow the manufacturer’s instructions.

Heat

Make sure that your TV is located away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

Grounding or polarization

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The wide blade or grounding prong are provided for your safety. If the plug does not fit, contact an electrician to replace the obsolete outlet.

Power cord protection

Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from your TV.

Attachments

Use only attachments recommended by Insignia.

Stand

Do not place your TV on an unstable cart, stand, tripod, bracket, or table. Your TV may fall, causing serious personal injury and serious damage to your TV. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with your TV. If you mount your TV to the wall, follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer. Your TV and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause your TV and cart combination to overturn.
www.insignia-products.com
5
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

Lightning

For added protection for your TV’s receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect the antenna or cable system. This helps prevent damage to your TV from lightning and power line surges.

Servicing

Do not attempt to service your TV yourself because opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Replacement parts

When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.

Overloading

Do not overload power outlets and extension cords because this can result in a risk of fire or electric shock.

Object and liquid entry

Never push objects of any kind into your TV through openings because objects may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on your TV.

Damage requiring service

Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:
When the power supply cord or plug is
damaged or frayed.
If liquid has been spilled or objects have
fallen into your TV.
If your TV has been exposed to rain or water.
If your TV does not operate normally by
following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.
If your TV has been dropped or damaged in
any way.
When your TV exhibits a distinct change in
performance.

Safety check

After completing any service or repair to this TV, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.

Power source

Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your TV dealer or local power company.

Screen protection

Your TV’s screen is made of glass. Do not drop your TV or hit the glass screen. If the screen breaks, be careful of broken glass.

Non-active pixels

The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few nonactive pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.

Outdoor antenna grounding

If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
1
1 Electric service equipment
2 Power service grounding electrode system
3 Ground clamps
4 Grounding conductors
5 Antenna discharge unit
6 Grounding clamp
7 Antenna lead-in wire

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for correct grounding and in particular, specifies that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.
7
6
5
4
3
2
6
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

End of life directives

Your new TV contains materials which can be recycled and reused. At the end of your TV’s life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Dispose of your old TV according to local regulations.

Features

Accessories

Make sure that the following accessories are provided in the package:
•Power cord
Remote control and batteries
User manual

Front

# Item Description
9 IR sensor Receives signals from the remote control.
10 MENU button Press to open the TV menu. 11 INPUT button Press to select the AV signal input. You can
12 Volume+/-
buttons
13 CH+/- buttons Press to change the channel. 14 POWER button Press to turn your TV combo on or off or
Do not block.
select TV, AV1, AV2, S-Video, Component, DVD, HDMI, or PC.
Press to adjust the volume.
press to leave standby mode.

Back

MENU
INPUT
VOL
VOL
CH
Disc label towards front
CH
POWER
# Item Description
1 Disc slot Insert a DVD or CD to change to DVD
2 PREV button Press to skip to the previous chapter or
3 NEXT button Press to skip to the next chapter or track. 4 STOP button Press to stop disc playback. 5 PLAY/PAUSE
button
6Disc In
indicator
7 OPEN/CLOSE
button
8 Power/Standby
indicator
mode and play the disc.
track.
Press to change to DVD mode and begin and pause the DVD or CD playback.
When Iit, indicates a DVD or CD is loaded into the disc slot.
Press to eject the disc in the disc slot.
Lights when your TV is plugged into a power outlet. When your TV is on, the indicator is blue. When your TV is in standby mode, the indicator is red.
USB
# Description
1 PHONES (headphone jack) 2 INPUT 2 (VIDEO and L/R AUDIO) 3 HDMI INPUT 4VGA PC INPUT 5AUDIO PC INPUT 6 INPUT (AV3-Y, Cr/Pr, Cb/Pb, AUDIO L, and
AUDIO R) 7 COAXIAL (digital audio) 8 AUDIO OUTPUT 9 INPUT 1 (AV1-composite video and L/R
AUDIO) (SVIDEO and L/R AUDIO) 10 UPGRADE jack (For service only) 11 ANT.INPUT (coaxial antenna)
www.insignia-products.com
7
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

Remote

# Button Description
1
2 TV Press to change to TV mode. 3 DVD Press to change to DVD mode. 4 Number
5 Press to view digital sub-channels. First
6 MUTE Press to mute the sound. Press again to
7 VOL +/- Press to adjust the volume. 8 MTS/SAP Press to select Stereo, Mono, or SAP
9 GUIDE Press to open the Electronic Program
10 CCD Press to select the closed caption mode
11 TV MENU Press to open the on-screen TV menu. 12
(power)
buttons
, , ,
Press to turn your TV combo on or off or press to leave standby mode.
Press to enter channel numbers, DVD chapters, or CD track numbers.
enter the main channel number, then press this button, then enter the sub-channel number.
restore the sound.
mode.
Guide (EPG).
while in TV mode.
Press to navigate the on-screen menus.
# Button Description
13 ENTER Press to confirm your selections. 14
(Fast
reverse)
(Fast
forward)
15
16
17 DVD TITLE Press to open the DVD title menu. 18 DVD MENU Press to open the DVD menu. 19 REPEAT Press to repeat a section of a DVD or CD. 20 AUDIO Press to change the DVD audio language. 21
22 INPUT Press to open the source input menu. 23 ZOOM Press to change the zoom mode. 24 25 RECALL Press to return to the previous channel. 26 FAVORITE Press to display your favorite channels list. 27 DISPLAY Press to display information about the
28 PICTURE Press to change the picture mode. 29 AUDIO Press to change the sound mode. 30
31
32 SETUP Press to open the DVD setup menu. 33 A-B Press to create a playback loop. 34 T.SEARCH Press to locate a point at which to start
35 RETURN Press to return to the previous menu. 36 SUBTITLE Press to change the DVD subtitle language.
(Skip
reverse)
(Skip
forward)
STOP
(Open)
CH /
(Play/Pause)
(slow)
Press to search backward on a DVD or CD.
Press to search forward on a DVD or CD.
Press to skip to the previous chapter or track.
Press to skip to the next chapter or track.
Press to stop DVD or CD playback.
Press to eject the disc from the disc slot.
Press to change the channel.
input source.
Press to play a DVD or CD. Press again to pause a DVD or CD.
Press to slow forward or slow reverse a DVD.
playback.
Not available on some DVDs.

Installing remote control batteries

To install the remote control batteries:
1 Remove the battery cover.
8
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment.
3 Replace the cover.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.
• If the remote control is not going to be used for an extended period of time, remove the batteries.

Using the remote control

To use the remote control:
Point the remote control directly at your TV, within a 60° angle horizontally (30° to either side), and within 30° vertically of the remote control sensor on the front of your TV and within 26.25 feet (8 m) of your TV.
Caution
Do not expose the remote control to liquids, direct sunlight, or shock. Do not mix batteries of different types.
Notes
• Objects between the remote control and the remote control sensor may block the remote control signal.
• The range of the remote control may be diminished if direct sunlight or other strong light is shining on the remote control sensor. In this case, change the angle of the lighting, move your TV, or operate the remote control closer to the remote control sensor.
www.insignia-products.com
9
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

Setting up your TV

Connecting an antenna, cable TV, or satellite TV

Connecting a standard video device

Note
Your TV supports multiple video source inputs. For temporary or easy-access video connections, use the side jacks (AV2). For more permanent connections, use the rear jacks (AV1).
To connect an external antenna, cable TV, or satellite TV:
1 Remove the port cover from the back of your
TV (1).
2 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the
ANT.INPUT jack on your TV.
3 Replace the port cover on the back of your
TV.
4 Turn on your TV. 5 Press INPUT, then press / to select TV.
To connect a standard video device to the AV1 jacks:
1 Plug an RCA video cable (4) into a standard
video source (5) and into the VIDEO jack on the back of your TV.
2 Plug the RCA audio cables (2) into the video
device's audio output jack and into the upper AUDIO L and AUDIO R jacks on the back of your TV.
3 Turn on your TV. 4 Press INPUT, then press / to select AV1 .
To connect an external video device to the AV2 jacks:
1 Plug the RCA video connector (8) into a
standard video device (5) and VIDEO jack (6) on the side of your TV.
2 Plug the RCA audio connectors (7) into the
audio out jacks on the video device and into the AUDIO L and AUDIO R jacks (6) on the side of your TV.
3 Turn on your TV. 4 Press INPUT, then press / to select AV2 .
10
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
To connect a standard S-Video device to AV1 jacks:
1 Plug an S-Video cable (3) into the S-Video
out jack on an S-Video device (5) and into the
S-VIDEO jack (1) on the back of your TV.
2 Plug RCA audio cables (2) into the S-Video
device audio output jacks and into the AUDIO L and AUDIO R jacks on the back of your TV.
3 Turn on your TV. 4 Press INPUT and / to select S-Video.

Connecting a component video device

Connecting a digital audio input

You can connect your TV audio out to a digital amplifier.
To connect a progressive-scan or HDTV video source to Y/Pb/Pr jacks:
1 Plug a component video cable (4) into the
progressive-scan or HDTV video device (3) and into the Y/Pb/Pr jacks (1) on the back of your TV.
2 Plug the RCA audio cables (2) into the audio
out jacks on progressive-scan or HDTV video device and into the lower AUDIO L and
AUDIO R jacks (1) on the back of your TV.
3 Turn on your TV. 4 Press INPUT, then press / to select
Component.
To connect to an amplifier equipped with a digital audio input:
1 Remove the port cover from the back of your
TV.
2 Plug a coaxial cable (2) into the amplifier (3)
and into the COAXIAL OUTPUT jack (1) on the back of your TV.
www.insignia-products.com
11
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

Connecting a computer

To connect a computer using VGA:
1 Remove the port cover (1) from the back of
your TV.
2 Plug a VGA cable (4) into the VGA port on
the computer (6) and into the VGA INPUT port on the back of your TV.
3 Plug an audio cable (5) into the audio jack on
the computer (6) and into the AUDIO VGA
INPUT port on the back of your TV.
4 Turn on your TV. 5 Press INPUT, then press / to select PC.
Caution
The TV will automatically turn off after one minute if there is no signal in PC mode.

Using the basic controls

Turning the TV on and off

To turn your TV on and off:
1 Press POWER on the side of your TV or on
the remote control. The POWER/STANDBY indicator turns blue.
2 To turn off your TV, press POWER again. The
POWER/STANDBY indicator turns red.

Adjusting the volume

You can adjust the volume using the controls on your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease
the volume.
2 Press MUTE to mute the sound, then press
this button again to restore the sound.

Changing the video mode

Your TV supports multiple video modes.
To select the video mode:
Press INPUT one or more times to select the video mode, then press ENTER. You can select:
TV
AV1
AV2
S-Video
Component
DVD
HDMI
•PC (VGA)

Using your TV

Selecting the TV signal source

To select the TV signal source:
1 Press TV MENU, then press / to
highlight CHANNEL. The opens.
CHANNEL
menu
To connect to a computer or other HDMI device using the HDMI jack:
1 Remove the port cover from the back of your
TV (1).
2 Plug an HDMI cable (2) into the HDMI port on
the HDMI device (3) and into the HDMI
INPUT port on the back of your TV.
3 Turn on your TV. 4 Press INPUT, then press / to select
HDMI.
Note
When the computer goes into standby mode, your TV turns off. If your TV does not turn on when you “wake” your computer, press the POWER button on your TV or remote control.
12
2 Press to enter the 3 Press / to select TV Source, then press
Air-VHF/UHF channels.
www.insignia-products.com
CHANNEL
/ to select Air or CATV.
menu.
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
CATV-Cable TV channels.
4 Press TV MENU one or more times to close
the menu.

Changing channels

To change channels:
Press the CH+ or CH- on the side of your TV
or the CH or CH on the remote control.
To enter a channel number directly:
Press the number buttons on the remote control.
In digital TV mode, a main (major) channel can have one or more sub. (minor) channels. Press the number buttons to enter the main channel, press the • button (to the left of the 0 button), then press the number button for the sub-channel. For example, if you want to watch channel 5.2, press 5, press the • button, then press 2.
To go to the previous channel:
Press RECALL.

Using the on-screen menus

Use your remote control to navigate in the on-screen menus.
To automatically memorize channels:
1 Press TV MENU on the remote control, then
press / to highlight CHANNEL. The
CHANNEL
2 Press to enter the 3 Press / to select AUTO SCAN, then
press . The
menu opens.
CHANNEL
Auto Scan
menu.
sub-menu opens.
To use the on-screen menus:
1 Press INPUT on the remote control to select
the video source.
2 Press TV MENU on the remote control. The
on-screen menu appears.
3 Press / to highlight the PICTURE,
AUDIO, TIME, OPTION, LOCK, or CHANNEL icon, then press to enter the
menu.
4 Press / to highlight a setting, then press
/ to change the setting.
5 Press TV MENU to close the menu.

Memorizing channels

To select channels with the CH buttons, your TV first needs to memorize the channels. When your TV memorizes channels, it scans for channels with signals, then stores the channel information into memory.
ENTER
4 Press / to select the type of auto scan
you want:
Scan all channels
Digital channel only
Analog channel only Then press to start the auto scan. Your
TV combo scans for and memorizes all channels available in your area.
5 To stop the auto search, press TV MENU.
When auto search is finished, the channel changes to the first channel in the memorized channel list.

Manually showing or hiding a channel

To manually show or hide a channel:
1 Make sure that you have scanned for digital
channels.
www.insignia-products.com
13
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
2 Press TV MENU on the remote control, then
press / to highlight CHANNEL. The
CHANNEL
3 Press to enter the 4 Press / to select Show/Hide, then press
. The
5 Press / to select a channel you want to
hide, then press ENTER. The checkmark next to the channel disappears and the screen turns black.
6 Press ENTER again to show the channel.
The checkmark appears, and the screen shows the channel.
menu opens.
Show/Hide
CHANNEL
sub-menu opens.
menu.

Adding favorite channels

To add channels to the favorite channel list:
1 Press TV MENU on the remote control, then
press / to highlight CHANNEL. The
CHANNEL
2 Press to enter the 3 Press / to select Favorite, then press
. The
menu opens.
Favorite s
CHANNEL
ub-menu opens.
menu.

Viewing channel information

To view channel information:
1 In digital TV mode, select a channel you want
to watch.
2 Press DISPLAY once to display information
about the channel.
3 Press DISPLAY again to display information
about the program content (if available).
4 Press DISPLAY again to close.
4 Press / to select a channel that you want
to add to the favorite channel list.
5 Press ENTER. A checkmark appears next to
the channel, and the channel is marked as a favorite.
6 Repeat this procedure to select the other
channels.
To select your favorite channel:
1 Press FAVORITE one or more times on the
remote control until the Favorite List appears on the screen.
2 Press / to select the preset for your
favorite channel.
Note
The favorite channel function does not work until you have programmed your favorite channels.
14
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
To remove a channel from the favorite channel list:
1 Press TV MENU on the remote control, then
press / to highlight CHANNEL. The
CHANNEL
2 Press to enter the 3 Press / to select Favorite, then press
. The
menu opens.
Favorite s
CHANNEL
ub-menu opens.
menu.

Adjusting picture settings

To adjust picture settings:
1 Press TV MENU on the remote control, then
press / to highlight the PICTURE icon. The
PICTURE
menu opens.
PC Mode
TV Mode
4 Press / to select the channel you want to
remove.
5 Press ENTER. The checkmark next to the
channel disappears, and the channel is removed from favorite channel list.
2 Press to enter the 3 Press / to select one of the following
settings, then press / to change the setting. You can select:
Picture Mode-Standard, Dynamic, Soft, or Personal.
Contrast
Brightness
Sharpness
Tint
Color
Color Mode-Normal, Warm, or Cool.
Advanced-When Advanced is highlighted, press to open the
Advanced
H-Pos (PC mode only)
V-Pos (PC mode only)
Clock (PC mode only)
Phase (PC mode only)
Auto (PC mode only)-Press to activate the auto adjust feature for PC mode.
Zoom Mode-Normal, Wide, Zoom,
Cinema, or Panorama. (In PC mode, only Normal and Wide are available for ZOOM
mode.)
menu.
PICTURE
menu.
www.insignia-products.com
15
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
3DNR-Off, Weak, Standard, Strong, or
Auto.
If the TV is operating in a weak-signal area, sometimes the 3DNR function can improve the reception.
4 Press TV MENU one or more times to close
the menu.

Adjusting audio settings

To adjust audio settings:
1 Press TV MENU on the remote control, then
press / to highlight the AUDIO icon. The
AUDIO
menu opens.
PC Mode
Audio only-On or Off. (If you select "On", the image disappears but the sound remains. Press any button to resume the image.)
4 Press TV MENU one or more times to close
the menu.

Using the Electronic Program Guide

Your TV has an Electronic Program Guide (EPG) that supplies information, such as program lists and start and end times for programs. In addition, detailed information about the program is often available in the EPG. (The availability and the amount of program details will vary depending on the broadcaster.)
To use the EPG:
1 In digital TV mode, select a channel you want
to watch.
2 Press GUIDE on the remote control. The
EPG opens with the channel that is currently active.
TV Mode
2 Press to enter the 3 Press / to select one of the following
settings, then press / to change the setting. You can select:
Sound Mode- Standard, Music, Movie, Sports, or Personal.
Treble/Bass-When Treble/Bass is highlighted, press to open the
Tr ebl e /B a s s
Bass
Treble
Balance
Prefer Language-English, French, or Spanish.
SPDIF Type-PCM or RAW.
Surround Sound-On or Off.
AUDIO
sub-menu.
menu.
3 By repeatedly pressing / , the information
for additional future programs can be displayed.
4 Press / to select the previous/next
program.
5 Press GUIDE one or more times to close the
EPG.

Changing the channel settings

To change channel settings:
1 Press TV MENU on the remote control, then
press / to highlight CHANNEL. The
CHANNEL
2 Press to enter the 3 Press / to select one of the following
settings, then press / to change the setting. You can select:
menu opens.
CHANNEL
menu.
16
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
TV Source-Air or CATV.
Auto Scan-For more information, see “Memorizing channels” on page 13.
Favorite-For more information, see “Adding favorite channels” on page 14.
Show/Hide-For more information, see “Manually showing or hiding a channel” on page 13.
Channel No.-Press / to select the channel.
Channel Label-For more information, see “Adding a channel label” on page 17.
Digital Signal-Display the signal strength of the Digital TV.
4 Press TV MENU one or more times to close
the menu.

Adding a channel label

To add a channel label:
1 Press TV MENU on the remote control, then
press / to highlight CHANNEL. The
CHANNEL
menu opens.

Adjusting time settings

To adjust time settings:
1 Press TV MENU on the remote control, then
press / to highlight the TIME icon. The
TIME
menu opens.
PC Mode
TV Mode
2007/11/01 09:00
2 Press to enter the
CHANNEL
menu.
3 Press / to select Channel Label, then
press to enter the
Channel Label
sub-menu.
Off
2 Press to enter the
TIME
menu.
3 Press / to select one of the following
settings, then press / to change the setting. You can select:
Sleep Timer-Select the sleep time you want.
Time Zone-Pacific, Alaska, Hawaii, Atlantic, Eastern, Central, or Mountain.
DST (Daylight Saving Time)-On or Off.
Time Format-12-hour or 24-hour.
Clock-Display the clock time.
4 Press TV MENU one or more times to close
the menu.
ENTER
4 Press / to move the cursor, then press
/ one or more times to select each
character of the new name for the channel.
5 Press TV MENU one or more times to close
the menu.
www.insignia-products.com
17
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo

Adjusting other settings

To adjust other settings:
1 Press TV MENU on the remote control, then
press / to highlight the OPTION icon. The
OPTION
menu opens.
PC Mode
TV Mode
Setting the closed caption mode
To set the closed caption mode:
1 Press TV MENU on the remote control, then
press / to highlight the OPTION icon.
OPTION
The
2 Press to enter the 3 Press / to highlight Closed Caption,
then press to enter the sub-menu. The opens.
menu opens.
TV Mode
OPTION
Closed Caption
menu.
Closed Caption
sub-menu
2 Press to enter the 3 Press / to select one of the following
settings, then press / to change the setting. You can select:
Menu Language-English, French, or Spanish.
Transparency-Adjust the menu transparency.
OSD Time Out-Adjust the display time of the OSD menu.
Closed Caption-See “Setting the closed caption mode” on page 18.
Restore Default-Select YES, then press ENTER to restore your TV combo to the factory settings.
4 Press TV MENU one or more times to close
the menu.
OPTION
menu.
4 Press / to select one of the following
settings, then press / to change the setting. You can select:
CC Mode-CC Off, CC On, or CC On Mute.
Basic Selection-Off, CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4.
Advanced Selection-Service1,
Service2, Service3, Service4, Service5, Service6, or Off.
Option-See “Setting the closed caption styles” on page 19.
5 Press TV MENU one or more times to close
the menu.
18
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
Setting the closed caption styles
To set the closed caption styles:
1 Press TV MENU on the remote control, then
press / to highlight the OPTION icon.
OPTION
The
2 Press to enter the 3 Press / to highlight Closed Caption,
then press to enter the sub-menu. The opens.
menu opens.
TV Mode
OPTION
Closed Caption
menu.
Closed Caption
sub-menu
Mode-Custom or Default. (If Default is selected, the other settings are not available.)
Font Style-Default, Font0, Font1,
Font2, Font3, Font4, Font5, Font6, or Font7.
Font Size-Default, Normal, Large, or Small.
Font Edge Style-Default, None, Raised, Depressed, Uniform, Left Shadow, or Right Shadow.
Font Edge Color-Default, Black, White, Red, Green, Blue, Yellow, Magenta, or Cyan.
FG Color-Default, White, Black, Red, Green, Blue, Yellow, Magenta, or Cyan.
BG Color-Default, Black, White, Red, Green, Blue, Yellow, Magenta, or Cyan.
FG Opacity-Default, Solid, Flashing, Translucent, or Transparent.
BG Opacity-Default, Solid, Flashing, Translucent, or Transparent.
6 Press TV MENU one or more times to close
the menu.

Setting the parental controls

To set the parental controls:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
screen opens.
4 Press / to select Option, then press
to enter the sub-menu opens.
5 Press / to select one of the following
settings, then press / to change the setting. You can select:
Option
sub-menu. The
Option
www.insignia-products.com
2 Press to enter the 3 Enter the password with the number buttons
on the remote control (the default password is 0000). The
LOCK
Enter Password
menu opens.
screen.
19
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
4 Press / to select one of the following
settings, then press / to change the setting. You can select:
Change Password-For more information, see “Changing the password” on page 20.
System Lock-On or Off. (Input Block,
US, Canada, RRT setting, and Reset RRT are only available when System Lock is set to On.)
Input Block-To block the input source.
US (United States)-For more information, see “Setting the parental control level - US TV ratings” on page 21.
Canada-For more information, see “Setting the parental control level ­Canadian ratings” on page 23.
RRT Setting-For more information, see “Setting the parental control level - RRT ratings” on page 24.
Reset RRT-Select YES, then press ENTER to reset the RRT to the default settings.
5 Press TV MENU one or more times to close
the menu.
Changing the password
To change the password:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
screen opens.
4 Press / to highlight Change Password,
then press to open the sub-menu.
5 Press the number buttons to input the old
password (if you have not set a password, enter 0000). The cursor moves to the Enter
New Password column.
6 Press the number buttons on the remote
control to input the new password. The cursor moves to the Confirm Password column.
7 Press number buttons to input the new
password again.
Blocking an input source
To block an input source:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
Change Password
screen opens.
2 Press to enter the 3 Enter the password with the number buttons
on the remote control (the default password is 0000). The
LOCK
Enter Password
menu opens.
screen.
2 Press to enter the 3 Enter the password with the number buttons
on the remote control (the default password is 0000). The
LOCK
Enter Password
menu opens.
screen.
20
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
4 Press / to highlight Input Block, then
press to open the The
Input Block
sub-menu opens.
Input Block
sub-menu.
5 Press / to select the input source you
want to block, then press / to change the setting.
Block-Block the input source. When you set the input source to Block, the screen turns black and "Input is blocked" will display on the screen when you exit the menu.
Unblock-Unblock the input source.
6 Press TV MENU one or more times to close
the menu.
Setting the parental control level - US TV ratings
3 Enter the password with the number buttons
on the remote control (the default password is 0000). The
LOCK
menu opens.
4 Press / to highlight US, then press to
open the
ratings
US ratings
sub-menu. The
sub-menu opens.
US
To set US TV parental control levels:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
2 Press to enter the
screen opens.
Enter Password
screen.
5 Press / to select TV, then press to
open the
ratings
TV ratings
sub-menu. The
sub-menu opens.
TV RATING
6 Press , , or to select any of the
TV ratings, then press ENTER. The Lock icon appears.
TV Parental Guidelines ratings
TV
Rating Description
TV-Y All children TV-Y7 Children over seven years of age
www.insignia-products.com
21
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
Rating Description
TV-G General audiences TV-PG Parental guidance suggested TV-14 Parents strongly cautioned TV-MA Mature audiences only
Some of the age-based TV Parental Guidelines ratings also have content-based ratings.
Rating Description
FV Fantasy violence L Adult language S Sexual situations V Violence D Sexually suggestive dialog
7 Press TV MENU one or more times to close
the menu.
Setting the parental control level - US TV movie ratings
To set US TV movie parental control levels:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
screen opens.
4 Press / to highlight US, then press to
open the
ratings
sub-menu opens.
US ratings
sub-menu. The
US
5 Press / to select MPAA, then press
to open the
Movie ratings
Movie ratings
sub-menu. The
sub-menu opens.
G
2 Press to enter the
Enter Password
screen.
3 Enter the password with the number buttons
on the remote control (the default password is 0000). The
LOCK
menu opens.
6 Press or to block or unblock the movie
rating. “LOCK” appears next to the movie ratings you block.
US MPAA ratings
Rating Description
G General audiences PG Parental guidance suggested. Some
material may not be suitable for children
PG-13 Parental guidance strongly suggested.
Some material may not be suitable for children under 13 years of age
R Restricted. Not suitable for children
under 17 years of age unless accompanied by a parent or guardian
NC-17 Not suitable for children under 17
years of age XAdults only N/A Not rated
7 Press TV MENU one or more times to close
the menu.
22
www.insignia-products.com
Insignia NS-LTDVD26-09 26” LCD TV/DVD Combo
Setting the parental control level - Canadian ratings
To set Canadian parental control levels:
1 Press TV MENU on the remote control, then
press / to highlight the LOCK icon. The
Enter Password
2 Press to enter the
screen opens.
Enter Password
screen.
3 Enter the password with the number buttons
on the remote control (the default password is 0000). The
LOCK
menu opens.
5 Press / to select Canada Eng (English)
or Canada Fre (French), then press to open the
Canada ratings
Canada ratings
sub-menu opens.
sub-menu. The
Canada English
Canada French
4 Press / to highlight Canada, then press
to open the
The
Canada ratings
Canada ratings
sub-menu opens.
sub-menu.
6 Press / to block or unblock the movie
rating. “LOCK” appears next to the movie ratings you block.
Canadian English MPAA ratings
Rating Description
CChildren C8+ Children 8 years and above G General audience PG Parental guidance suggested 14+ 14 years old and above 18+ Adult programming EXEMPT Not rated
Canadian French MPAA ratings
Rating Description
GChildren 8ans+ Children 8 years and above 13ans+ Children 13 years and above 16ans+ Children 16 years and above 18ans+ Adult programming EXEMPT Not rated
www.insignia-products.com
23
Loading...
+ 53 hidden pages