Insignia NS-LTDVD19 User Manual
User Guide | Guide de l’utilisateur | Guía del Usuario
19" LCD TV/DVD Combo
Ensemble lecteur de DVD/TV ACL de 19 po
Combo Televisor LCD/Reproductor de DVD de 19"
NS-LTDVD19
Insignia
NS-LTDVD19
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
1 Year Limited Warranty . . . . . . . . . . . . . . . . . . .19
Français . . . . . . . . . . . . . . . . . . . . . . . .21
Español . . . . . . . . . . . . . . . . . . . . . . . . .43
19" LCD TV/DVD
Combo
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety information . . . . . . . . . . . . . . . . . . . . . . . . .1
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up your LCD TV/DVD combo. . . . . . . . . . .5
Installing remote control batteries . . . . . . . . . . . . . . 5
Connecting an antenna . . . . . . . . . . . . . . . . . . . . . . 5
Connecting cable or satellite TV. . . . . . . . . . . . . . . . 5
Connecting a component video device . . . . . . . . . . 6
Connecting an S-Video device. . . . . . . . . . . . . . . . . 6
Connecting a standard A/V device. . . . . . . . . . . . . . 6
Connecting an HDMI device. . . . . . . . . . . . . . . . . . . 6
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . 7
Using basic controls. . . . . . . . . . . . . . . . . . . . . . . .7
Turning your LCD TV/DVD combo on and off . . . . . 7
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . 7
Selecting the video mode . . . . . . . . . . . . . . . . . . . . . 7
Using the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Selecting the TV signal source. . . . . . . . . . . . . . . . . 7
Memorizing channels . . . . . . . . . . . . . . . . . . . . . . . . 7
Adding channels to the channel list . . . . . . . . . . . . . 8
Adding or removing a channel . . . . . . . . . . . . . . . . . 8
Changing channels. . . . . . . . . . . . . . . . . . . . . . . . . . 8
Selecting the picture mode. . . . . . . . . . . . . . . . . . . . 8
Viewing channel information . . . . . . . . . . . . . . . . . . 8
Viewing the digital program guide . . . . . . . . . . . . . . 8
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . 9
Adding favorite channels . . . . . . . . . . . . . . . . . . . . . 9
Tuning to a favorite channel . . . . . . . . . . . . . . . . . . . 9
Adjusting picture settings . . . . . . . . . . . . . . . . . . . . . 9
Adjusting advanced video settings. . . . . . . . . . . . . . 9
Adjusting audio settings . . . . . . . . . . . . . . . . . . . . . . 9
Adding a channel label . . . . . . . . . . . . . . . . . . . . . . 10
Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the closed caption mode . . . . . . . . . . . . . . 10
Setting closed caption styles . . . . . . . . . . . . . . . . . 10
Setting parental controls. . . . . . . . . . . . . . . . . . . . . 11
Changing the password . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the VGA picture . . . . . . . . . . . . . . . . . . . 12
Adjusting the component picture . . . . . . . . . . . . . . 13
Using the DVD player . . . . . . . . . . . . . . . . . . . . .13
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Controlling disc playback . . . . . . . . . . . . . . . . . . . . 13
Playing a JPEG disc. . . . . . . . . . . . . . . . . . . . . . . . 14
Selecting a subtitle language . . . . . . . . . . . . . . . . . 14
Repeating a section of a disc . . . . . . . . . . . . . . . . . 14
Creating a playback loop . . . . . . . . . . . . . . . . . . . . 14
Selecting a viewing angle. . . . . . . . . . . . . . . . . . . . 14
Using a DVD main menu . . . . . . . . . . . . . . . . . . . . 14
Using a DVD title menu . . . . . . . . . . . . . . . . . . . . . 14
Displaying disc information. . . . . . . . . . . . . . . . . . . 14
Using program play . . . . . . . . . . . . . . . . . . . . . . . . 14
Searching for a scene . . . . . . . . . . . . . . . . . . . . . . 15
Playing a DVD in slow motion . . . . . . . . . . . . . . . . 15
Selecting the audio mode. . . . . . . . . . . . . . . . . . . . 15
Using the DVD setup menus . . . . . . . . . . . . . . . . . 15
Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cleaning the cabinet. . . . . . . . . . . . . . . . . . . . . . . . 16
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Introduction
Congratulations on your purchase of a
high-quality Insignia product. Your NS-LTDVD19
represents the state of the art in LCD TV and
DVD player design, and is designed for reliable
and trouble-free performance.
Safety information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning
To reduce the risk of electric shock, do not remove
the cover or back. No user serviceable parts
inside. Refer servicing to qualified service
personnel.
To reduce the risk of fire or electric shock, do not
expose your LCD TV/DVD combo to rain or
moisture.
Caution
To prevent electric shock, match the wide blade
on the power cord plug to the wide slot on an
electric outlet. If the plug does not fit, consult a
licensed electrician to replace the obsolete outlet.
Do not modify the power cord plug, or you will
defeat this safety feature.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within your LCD TV/DVD combo. This label is
located on the back of your LCD TV/DVD
combo.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying your LCD TV/DVD
combo.
Important safety
instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use your LCD TV/DVD combo near
water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
www.insignia-products.com
1
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong is provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from your LCD TV/DVD combo.
11 Only use attachments or accessories
specified by the manufacturer.
12 Use only with a cart, stand,
tripod, bracket, or table
specified by the manufacturer.
13 Unplug your LCD TV/DVD
combo during lightning storms
or when unused for long
periods of time.
14 Refer all servicing to qualified service
personnel.
Servicing is required when your LCD
TV/DVD combo has been damaged in any
way, such as the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into your LCD TV/DVD combo,
your LCD TV/DVD combo has been exposed
to rain or moisture, does not operate
normally, or has been dropped.
15 If an outside antenna or cable system is
connected to your LCD TV/DVD combo,
make sure that the antenna or cable system
is grounded to provide some protection
against voltage surges and built-up static
charges. Article 810 of the National Electrical
Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding
of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of the antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
1 Electric service equipment
2 Power service grounding electrode
system
3 Ground clamps
4 Grounding conductors
5 Antenna discharge unit
6 Grounding clamp
7 Antenna lead-in wire
Features
Front
1
INPUT MENU VOL- VOL+ CH- CH+ POWER
7
6
5
4
3
1
2
3
2
4
5
# Button Description
1 INPUT Press to select the video
2 MENU Press to open the TV menu.
3 VOL–/VOL+ Press to decrease or
4 CH–/CH+ Press to go to the next lower
5 POWER Press to turn your LCD
2
www.insignia-products.com
mode. You can select TV,
Composite, S-Video, VGA,
Component, HDMI, or DVD.
increase the volume.
or higher channel.
TV/DVD combo on or off.
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
Jacks
# Jack Description
A
N
TI
N
S
-VIDE
O VGAI
HDM
I
N
P
C
A
U
D
I
O
IN
P
rPb
C
OMP
O
N
E
N
TIN
Y
R
A
UDIO
IN
L
V
I
DEO
V
I
N
4 VGA IN Plug a video cable for a computer
into this jack.
5 PC AUDIO IN Plug an audio cable for a computer
into this jack.
6 COMPONENT IN Plug a component video device into
these jacks.
7 AUDIO IN Plug an audio cable into these jacks
to provide sound for a standard A/V
device, and S-Video device, or a
component video device.
8 VIDEO IN Plug a standard video device into
this jack.
9 Headphone Plug headphones into this jack.
Remote control
ANT IN
1
S-VI DEO
1
2
3
2
HDM I
4
5
24
25
26
27
28
3
29
VGA IN
4
PC AUDIO IN
5
6
7
8
Pr Pb Y
COMPONENT IN
R
AUD
IO IN
L
VIDEO IN
V
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
23
9
# Jack Description
1 ANT IN Plug your outside antenna, cable
box, or satellite box into this jack.
2 S-VIDEO Plug an S-Video device into this jack.
3 HDMI Plug an HDMI device into this jack.
This jack sends both audio and
video.
www.insignia-products.com
# Button Description
1 POWER Press to turn your LCD TV/DVD
combo on or off.
3
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
# Button Description
2 INPUT Press to select the video mode.
3 CCD Press to select the closed caption
4 MTS/SAP Press to select the audio mode.
5 Numbers Press to enter channel numbers
6 RECALL Press to go to the previously
7 VOL+/VOL–
CH+/CH–
8 ENTER (OK) Press to confirm selections.
9 MENU Press to open the TV menu.
10 CH.LIST Press to open the channel list
11 FAVORITE Press to open the favorite channel
12 TITLE Press to display the title for the
13 DISPLAY Press to display information
14 REV Press to fast-reverse on a DVD.
15 FWD Press to fast-forward on a DVD.
16 DVD MENU Press to open the main DVD
17 PLAY/ENTER Press to start DVD playback. In
18 Arrows Press to navigate through menus.
19 ANGLE Press to select the viewing angle
20 AUDIO Press to select the DVD audio
21 PROGRAM Press to select the DVD program
22 TV/DVD Press to switch between DVD
23 EXIT Press to close the on-screen
24 OPEN/CLOSE Press to open or close the disc
25 AU.LIST Press to display the audio
26 PICTURE Press one or more times to select
27 SLEEP Press to set the sleep timer.
You can select TV, Composite,
S-Video, VGA, Component,
HDMI, or DVD.
mode when your LCD TV/DVD
combo is in TV, DVD, A/V, or
S-Video mode.
You can select Stereo, Mono, or
SAP (second audio program).
or passwords.
viewed channel when your LCD
TV/DVD combo is in TV mode.
Press to increase or decrease the
volume.
Press to go to the next higher or
lower channel.
when your LCD TV/DVD combo is
in TV mode.
list when your LCD TV/DVD
combo is in TV mode.
currently playing DVD.
about the currently playing DVD.
menu. Not all DVDs have a main
menu.
menus, press to confirm
selections.
on a DVD. Not all DVDs are
recorded with multiple viewing
angles.
language.
you want to play.
mode and the currently selected
video input.
display (OSD).
tray.
program list.
a picture mode. You can select
Personal, Standard, Mild, or
Fresh.
# Button Description
28 Press to select a digital
sub-channel.
29 10+ DVD mode only.
If a chapter or track number is
over 10, press this button, then
press the number button for the
last digit in the chapter or track
number.
30 MUTE Press to turn off the sound. Press
again to restore the sound.
31 DISPLAY Press to display TV channel
information.
32 ZOOM Press to select the aspect ratio.
You can select Wide, Zoom,
Cinema, Full Screen, or Normal.
33 GUIDE Press to open the program guide
when your LCD TV/DVD combo is
in digital TV mode.
34 SUBTITLE Press one or more times to select
a subtitle language.
35 SETUP Press to open the DVD setup
menu.
36 NEXT Press to go to the next chapter or
track.
37 PREV Press to go to the previous
chapter or track.
38 PAUSE/STEP Press to pause DVD playback.
Press again to advance image one
frame at a time.
39 STOP Press to stop disc playback.
40 SLOW Press to decrease the DVD
playback speed. Press Play/Enter
to resume normal playback.
41 SEARCH Press to search on a DVD.
42 ZOOM Press to select the aspect ratio.
43 A-B Press to repeat a section of the
disc.
44 REPEAT Press to repeat the current
chapter or track.
4
www.insignia-products.com
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
Setting up your LCD TV/DVD
combo
Installing remote control batteries
To install remote control batteries:
1 Remove the battery compartment cover.
2 Insert two AA batteries into the battery
compartment. Make sure that you align the +
and – symbols on the batteries with the + and
– symbols inside the battery compartment.
3 Replace the battery compartment cover.
Notes
Make sure that there is no obstruction between
the remote control and the remote sensor on your
LCD TV/DVD combo.
Keep the remote control away from heat sources
or humid areas.
Strong light may affect the signal between the
remote control and the remote sensor on your
LCD TV/DVD combo. If the remote control does
not work, change the position of the remote
control.
Make sure that the batteries are alkaline batteries.
Batteries must be of the same type.
Do not mix old and new batteries.
Do not use rechargeable batteries.
Connecting an antenna
Caution
Do not bend the bronze wires on the cables.
To connect an antenna:
1 Make sure that your LCD TV/DVD combo is
turned off.
2 Plug one end of a 75 ohm cable (not
included) into the ANT IN jack on the back of
your LCD TV/DVD combo.
3 Plug the other end of the cable into the
outside antenna jack.
Notes
To improve picture quality in an area with poor
signal reception, install a signal amplifier.
If you want to connect two TVs to the antenna,
install a 2-way signal splitter.
Connecting cable or satellite TV
To watch cable or satellite TV, you need a TV
tuner device or a cable or satellite TV converter
box.
There are two ways to connect cable or satellite
TV to your LCD TV/DVD combo.
Option 1
Caution
Do not bend the bronze wires on the cables.
To connect cable or satellite TV:
1 Make sure that your LCD TV/DVD combo
and converter box are turned off.
2 Connect a 75 ohm cable (not included) to the
RF jack on the cable or satellite TV converter
box and to the ANT IN jack on the back of
your TV.
3 Connect one end of a 75 ohm cable (not
included) to the cable jack on the cable or
satellite TV converter box and to the cable or
satellite TV wall jack.
4 Set the channel switch on the cable or
satellite TV converter box to 3 or 4.
5 Turn on your LCD TV/DVD combo and the
converter box, then tune your LCD TV/DVD
combo to the same channel you set the
channel switch to.
6 Use the cable or satellite TV remote control
to tune channels.
Option 2
To connect cable or satellite TV:
1 Make sure that your LCD TV/DVD combo
and cable or satellite converter box are
turned off.
2 Connect audio and video out jacks on the
cable or satellite TV converter box to the
AUDIO IN and VIDEO IN jacks on the back of
your TV.
3 Turn on your LCD TV/DVD combo and the
converter box, then press INPUT to select
TV.
www.insignia-products.com
5
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
4 Use the cable or satellite TV remote control
to tune channels.
Connecting a component video device
To connect a component video device:
1 Make sure that your LCD TV/DVD combo
and component video device are turned off.
2 Connect the component video device’s video
output jacks (Y, Pb, Pr) to the COMPONENT
IN (Y, Pb, and Pr) jacks on the back of your
LCD TV/DVD combo.
3 Connect the component video device’s audio
output jacks to the AUDIO IN (L and R) jacks
on the back of your TV.
4 Turn on your LCD TV/DVD combo and the
component video device, then press INPUT
to select Component.
Connecting an S-Video device
To connect an S-Video device:
1 Make sure that your LCD TV/DVD combo
and S-Video device are turned off.
2 Connect an S-Video cable (not included) to
the S-Video out jack on the S-Video device
and to the S-VIDEO jack on the back of your
LCD TV/DVD combo.
Connecting a standard A/V device
To connect a standard A/V device:
1 Make sure that your LCD TV/DVD combo
and A/V device are turned off.
2 Connect a standard A/V cable (not included)
to the audio and video output jack on your
standard A/V device and to the AUDIO IN (L
and R) and VIDEO IN jacks on the back of
your TV. The white connector is left audio.
The red connector is right audio. The yellow
connector is video.
3 Turn on your LCD TV/DVD combo and the
standard A/V device, then press INPUT to
select A/V.
Connecting an HDMI device
Note
• Both audio and video are transmitted through
the HDMI jack.
To connect an HDMI device:
1 Connect an HDMI cable to the HDMI output
jack on the HDMI device and to the HDMI
jack on your LCD TV/DVD combo.
HDMI
3 Connect an audio cable to the left and right
audio out jacks on the S-Video device and to
the AUDIO IN (L and R) jacks on the back of
your LCD TV/DVD combo.
4 Turn on your LCD TV/DVD combo, then turn
on the S-Video device.
5 Press INPUT to select S-Video.
6
www.insignia-products.com
2 Turn on your LCD TV/DVD combo and the
HDMI device, then press INPUT to select
HDMI.
HDMI
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
Connecting a computer
To connect a computer:
1 Make sure that your LCD TV/DVD combo
and computer are turned off.
2 Connect a VGA cable to the VGA port on the
back of the computer and to the VGA IN jack
on the back of your LCD TV/DVD combo.
Make sure that you tighten the screws on the
ends of the VGA cable.
3 Connect a computer audio cable to the left
and right audio output jacks on the computer
and to the PC AUDIO IN jack on the back of
your LCD TV/DVD combo.
4 Turn on the computer and your LCD TV/DVD
combo, then press INPUT to select VGA.
Notes
If the picture quality is not good:
• Adjust the brightness and contrast.
• Change the PC’s video resolution.
• Change the refresh rate for the PC’s video
card. If you cannot change the refresh rate for
the video card, you may need to replace the
video card.
Using basic controls
Turning your LCD TV/DVD combo on and
off
Using the TV
Selecting the TV signal source
To select the TV signal source:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Tuning
Band.
3 Press VOL+ or ENTER, then press VOL+ or
VOL– to select the TV signal source. You
can select Cable Auto, Air, Cable, Cable
HRC, or Cable IRC. If you use satellite TV,
select Air or Cable depending on the type of
satellite TV signal.
Memorizing channels
To select channels with the CH buttons, your
LCD TV/DVD combo needs to memorize
channels. When your LCD TV/DVD combo
memorizes channels, it scans for channels with
signals, then stores the channel information into
memory.
To memorize channels:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
To turn your LCD TV/DVD combo on and off:
1 Plug the power cord into a power outlet. The
LED on the front of your LCD TV/DVD combo
lights yellow.
2 Press POWER. The LED lights green.
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or
decrease the volume. A number appears
on the screen to indicate the volume level.
• Press MUTE to mute the sound. Press
MUTE again to restore the sound.
Selecting the video mode
To select the video mode:
• Press INPUT one or more times to select the
video mode you want. You can select TV,
Composite, S-Video, VGA, Component,
HDMI, or DVD.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Auto Ch
Search.
www.insignia-products.com
7
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
3 Press VOL+ or ENTER to start scanning for
channels. Your LCD TV/DVD combo
searches for channels that have a signal. Any
channel that has no signal or a poor signal
are not saved. During the search, the
following appears.
Your LCD TV/DVD combo scans for analog
channels, then scans again for digital
channels. When the search is complete the
first channel appears on the screen.
Adding channels to the channel list
You can add channels that were not found in a
previous scan for channels.
For example, if your LCD TV/DVD combo found
channels 1 through 20 and you select the Add
On Ch Search option, your LCD TV/DVD combo
scans for channels starting at 21.
To add channels to the channel list:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Manual Ch
Set.
3 Press ENTER. The following appears.
4 Press CH+ or CH– to select the channel you
want to add or remove, then press ENTER to
add or remove the channel from the list.
Changing channels
To change channels:
• Press CH+ or CH– to go to the next higher or
lower channel in the memorized channel list.
Or, press the number buttons for the channel
you want, then press ENTER.
• Press CH.LIST to display the memorized
channel list, press CH+ or CH– to select the
channel you want, then press ENTER.
• To select a sub-channel, tune to the main
channel, press , then press the number
button for the sub-channel you want. For
example, to select digital channel 11.1, press
11, press , then press 1. To select analog
channel 13.0, press 13, then press . You
must press after you press 13, or you will
go to digital channel 13.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Add On Ch
Search.
Adding or removing a channel
You can add or remove a channel to or from the
channel list. If you remove a channel from the
list, your LCD TV/DVD combo skips the channel
when you press the CH buttons. You can still
tune to the channel by pressing the number
buttons.
To manually add or remove a channel:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
Selecting the picture mode
To select the picture mode:
• Press PICTURE one or more times to select
the mode you want. You can select
Personal, Standard, Mild, or Fresh.
Viewing channel information
To view channel information:
• Press DISPLAY. Current channel information
appears.
Viewing the digital program guide
If you are in digital TV mode (DTV), you can
view a list of available digital channels.
To view the digital program guide:
1 Press GUIDE. The digital channel list
appears.
2 Press CH+ or CH– to scroll one channel at a
time.
Or, press VOL+ or VOL– to scroll one screen
at a time.
8
www.insignia-products.com
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
Setting the sleep timer
You can set an amount of time you want your
LCD TV/DVD combo to wait before it turns off
automatically.
To set the sleep timer:
• Press SLEEP one or more times to select the
time you want. You can select Sleep 0 min,
Sleep 5 min, Sleep 10 min, Sleep 15 min,
Sleep 30 min, Sleep 45 min, Sleep 60 min,
Sleep 90 min, Sleep 120 min, Sleep 180
min, or Sleep 240 min.
Adding favorite channels
To add a favorite channel:
1 Press CH.LIST. The channel list opens.
2 Press CH+ or CH– to select a channel.
3 Press FAVORITE to add the channel to the
favorites channel list.
4 To remove a favorite channel, open the
channel list, select the channel you want to
remove, then press FAVORITE.
Tuning to a favorite channel
To tune to a favorite channel:
1 Press FAVORITE. The favorite channel list
opens.
2 Press CH+ or CH– to select the channel.
Your LCD TV/DVD combo automatically
tunes to the channel you selected.
3 Press VOL+ or ENTER, then press VOL+ or
VOL– to adjust the option.
Adjusting advanced video settings
To adjust advanced picture settings:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
Note
In HDMI and S-Video modes, the options on this
screen vary.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Advanced
Video Menu.
3 Press VOL+ or ENTER. The following menu
opens.
Adjusting picture settings
To adjust picture settings:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– to select an option. You can select:
• Picture Mode–Selects the picture mode.
You can select Personal, Standard,
Mild, or Fresh.
• Contrast–Adjusts the contrast.
• Brightness–Adjusts the brightness.
• Sharpness–Adjusts the sharpness.
• Color–Adjusts the color saturation.
• Tint–Adjusts the color tone. This option is
only available in NTSC mode.
• Aspect Ratio–Selects the aspect ratio.
You can select Wide, Zoom, Cinema,
Full Screen, or Normal.
Note
You can also press PICTURE to select the picture
mode.
4 Press CH+ or CH– to select an option. You
can select:
• Noise Reduction-Spatial–Select On or
Off.
• Noise Reduction-Speckle–Select On or
Off.
• Noise Reduction-Temporal–Select On
or Off.
• Color Temperature–Select Neutral,
Warm, or Cool.
• 3d Y/C–Select On or Off.
Adjusting audio settings
To adjust audio settings:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– to select an option. You can select:
www.insignia-products.com
9
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
• Audio Mode–Selects the audio mode.
You can select User, Voice, Concert, or
Jazz.
• Audio Language–Selects the audio
language.
• Bass–Adjusts the bass. This setting is
only saved if Audio Mode is set to User.
• Treble–Adjust the treble. This setting is
only saved if Audio Mode is set to User.
• Balance–Adjusts the output for the left
and right speakers.
3 Press VOL+ or ENTER, then press VOL+ or
VOL– to adjust the option.
Adding a channel label
To add a channel label:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Channel
Label. The following appears.
3 Press VOL+ or VOL– to select the which
character you want to enter.
4 Press CH+ or CH– to enter a character. You
can enter seven characters.
Setting the time
To set the time:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
3 Press VOL+ or ENTER. The following
appears.
4 Press CH+ or CH– to select Time Set Mode,
then press VOL+ or VOL– to select Manual.
5 Press VOL+ or ENTER, then press VOL+ or
VOL– to set the time.
6 To set the time zone, press CH+ or CH– to
select Time Zone, then press VOL+ or VOL–
to select the time zone.
7 To set the date, press CH+ or CH– to select
Year or Date, then press VOL+ or VOL– to
set the year or date.
Setting the closed caption mode
To select the closed caption mode:
• Press CCD one or more times while in TV,
DVD, AV, or S-Video mode.
In NTSC mode, you can select:
• CC1–Displays a written version of the
audio.
• CC2 through CC4–Displays a second
language version of the audio or other
information provided by the broadcaster.
• TEXT1–Displays the program guide and
other information provided by the
broadcaster. This mode covers a large
area of the screen.
• TEXT2 through TEXT4–Displays
information provided by the broadcaster.
This mode covers a large area of the
screen.
In ATSC mode, you can select CS1 through
CS6.
Setting closed caption styles
You can only set closed caption styles when in
DTV mode.
To set closed caption styles:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
10
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Time Set.
www.insignia-products.com
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Digital
Closed Caption.
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
3 Press VOL+ or ENTER. The following
appears.
/OK Select /Exit/Menu Exit
4 Press CH+ or CH– to select the option you
want to change, the press VOL+ or VOL– to
change the style. You can select Style, Size,
Font, Text Color, Text Opacity,
Background Color, Background Opacity,
Edge Effect, and Edge Color.
Note
If you set the Style option to automatic, you
cannot adjust any other closed caption options.
Setting parental controls
You can block TV programs and movies based
on their ratings. Some of the TV ratings have
sub-ratings.
US TV ratings
NONE Not rated.
TV-Y Suitable for all children.
TV-Y7 Suitable for children 7 and older. This
TV-G Suitable for general audiences. This
TV-PG Parental guidance suggested. This type
TV-14 Parental guidance strongly suggested.
TV-MA Mature audiences only.
US TV sub-ratings
type program may include comic or
mild physical violence.
type program may include little or no
violence, no strong language, and little
or no sexual language or situations.
program may include limited violence,
some suggested sexual language or
situations, and occasional offensive
language.
This type program may include sexual
content, offensive language, and
intense violence.
English Canadian TV ratings
E No programs are blocked.
C Suitable for all children. No offensive
language, nudity, or sexual content.
C8+ Suitable for children over 8. No
offensive language, nudity, or sexual
content.
G Suitable for all audiences.
PG Parental guidance suggested. May
contain some content not suitable for
young children.
14+ Suitable for children over 14. Parents
are strongly recommended not to let
children and pre-teens view a program
with this rating.
18+ Adults only. Not suitable for children
under 18.
French Canadian ratings
E No programs are blocked.
G General audiences.
8 ans+ Suitable for children 8 and over.
13 ans+ Suitable for children 13 and over.
16 ans+ Suitable for children 16 and over.
18 ans+ Suitable for adults only.
Movie ratings
NONE Not yet rated.
G General audiences.
PG Parental guidance suggested.
PG13 Parents strongly cautioned. May not be
suitable for children under 13.
R Restricted. Not suitable for children
under 17 without parental supervision.
NC-17 No suitable for children under 17.
XAdults only.
To set parental controls:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
ALL Blocks all available sub-ratings.
FV Fantasy violence.
L Offensive language.
S Sexual language.
V Violence.
D Sexually suggestive language.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Parental
Control.
3 Press VOL+ or ENTER. The
screen opens.
www.insignia-products.com
Enter Password
11
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
4 Press the number buttons to enter the
password. The default password is 0000.
Parental Control Menu
The
Note
The Advanced Rating option appears only in
Digital TV mode.
screen opens.
5 Press CH+ or CH– to select US Ratings or
Canadian Rating, then press VOL+ or
ENTER. The one of the following ratings
screens opens.
3 Press VOL+ or ENTER. The
Password
screen opens.
4 Press the number buttons to enter the old
password. If you have not set a password,
enter the default password 0000.
5 When prompted, enter the new password
twice.
Note
If you change the password then forget it, enter
9443.
Adjusting the VGA picture
To adjust the VGA picture:
1 Make sure that your LCD TV/DVD combo is
connected to a computer through the VGA
connections.
2 Press INPUT one or more times to select
VGA.
3 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
Enter OLD
6 Press CH+ or CH– to select the rating you
want to block, the press VOL+ or ENTER.
The rating you selected and all higher ratings
are blocked.
Changing the password
To change the password:
1 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
2 Press VOL+ or ENTER, then press CH+ or
CH– one or more times to select Password
Set.
4 Press VOL+ or ENTER, then press CH+ or
CH– to select VGA Set.
5 Press VOL+ or ENTER. The
VGA Setting
screen opens.
50
50
50
50
/OK Select /Exit/Menu Exit
6 Press CH+ or CH– to select an option, then
press VOL+ or VOL– to adjust the option.
You can select:
• H-Position–Moves the screen image left
or right.
• V-Position–Moves the screen image up
or down.
• Clock–Minimizes any vertical bars or
stripes in the screen image.
• Phase–Minimizes any horizontal
distortions and sharpens the screen
image.
12
www.insignia-products.com
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
• Auto Adjust–Automatically adjusts the
VGA settings for the best screen image.
• Setting–Resets the VGA settings to the
factory defaults.
Adjusting the component picture
To adjust the component picture:
1 Make sure that your LCD TV/DVD combo is
connected to a computer through the
component connections.
2 Press INPUT one or more times to select
Component.
3 Press MENU, then press CH+ or CH– one or
more times until the following menu opens.
4 Press VOL+ or ENTER, then press CH+ or
CH– to select Component Set.
5 Press VOL+ or ENTER. The
Setting
screen opens.
Component
Using the DVD player
Playable discs
Type Label Contents Size
DVD video Audio and
Audio CD Audio 12 cm
HDCD Audio 12 cm
JPEG Pictures 12 cm
Kodak CD Pictures 12 cm
CD-R
CD-RW
CD+G
CD-R
CD-RW
CD+G
Playing a disc
To play a disc:
1 Turn on your LCD TV/DVD combo.
2 Press TV/DVD to select DVD mode.
3 When OPEN appears on the screen, insert
the disc.
video
Audio and
video
Audio and
video
Audio and
pictures
12 cm
12 cm
12 cm
12 cm
6 Press CH+ or CH– to select an option, then
press VOL+ or VOL– to adjust the option.
You can select:
• H-Position–Moves the screen image left
or right.
• V-Position–Moves the screen image up
or down.
• Clock–Minimizes any vertical bars or
stripes in the screen image.
• Phase–Minimizes any horizontal
distortions and sharpens the screen
image.
• Auto Adjust–Automatically adjust the
component settings for the best screen
image.
• Setting–Resets the component settings
to the factory defaults.
Caution
Do not insert the disc until you see the OPEN
message.
Caution
Your LCD TV/DVD combo automatically changes
to DVD mode when you insert a disc while in
another mode. However, if you change from DVD
mode to another mode, you MUST wait five to six
seconds before you insert a disc. Otherwise, you
may damage the DVD player.
4 If the disc does not start playing
automatically, press PLAY/ENTER.
5 To stop playback, press STOP.
Controlling disc playback
To control disc playback:
• To pause playback, press PAUSE/STEP. To
resume playback, press PLAY/ENTER.
• To advance on a DVD one frame at a time,
press PAUSE/STEP. Playback pauses.
Press this button again to advance one
frame. Press PLAY/ENTER to resume
playback.
www.insignia-products.com
13
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
• To go to the beginning of the current chapter
or track, press PREV.
• To go to the previous chapter or track, press
PREV twice. Each time you press this button,
your LCD TV/DVD combo skips back one
chapter or track.
• To go to the next chapter or track, press
NEXT. Each time you press this button, your
LCD TV/DVD combo skips forward one
chapter or track.
• To fast-reverse on a disc, press REV. Each
time you press this button the fast-reverse
speed changes.
• To fast-forward on a disc, press FWD. Each
time you press this button the fast-forward
speed changes.
Playing a JPEG disc
To play a JPEG disc:
1 Turn on your LCD TV/DVD combo.
2 Press TV/DVD to select DVD mode.
3 When OPEN appears on the screen, insert
the disc. A navigation menu opens.
Caution
Do not insert the disc until you see the OPEN
message.
To create a playback loop:
1 Locate the starting point for the loop, then
press REPEAT.
2 Play the disc until you reach the stopping
point for the loop, then press REPEAT. Your
LCD TV/DVD combo plays the loop.
3 To cancel the loop and return to normal
playback, press REPEAT again.
Selecting a viewing angle
Some DVDs include scenes that have multiple
viewing angles.
To select a viewing angle:
• Press ANGLE one or more times.
Using a DVD main menu
Note
Some DVDs do not have menus.
To use a DVD main menu:
1 Press DVD MENU.
2 Use the arrow buttons to select an option,
then press PLAY/ENTER.
Using a DVD title menu
4 Press the up or down arrow button to select a
file, then press PLAY/ENTER.
Selecting a subtitle language
Note
The number of subtitle language available
depends on the DVD. Some DVDs do not have
subtitles.
To select a subtitle language:
• Press SUBTITLE one or more times to select
the subtitle language you want.
01/XX XXXXX
appears on the screen. 01
indicates the original disc language. XX
indicates the total number of available
subtitle languages.
XXXXX
indicates the
country for the selected language.
Repeating a section of a disc
Note
For discs other than DVDs, this function may work
differently.
To repeat a section of a disc:
1 Press REPEAT. Your LCD TV/DVD combo
repeats the current chapter.
2 Press REPEAT again. Your LCD TV/DVD
combo repeats the current title.
3 Press REPEAT again. Your LCD TV/DVD
combo repeats the entire DVD.
4 Press REPEAT again to return to normal
playback.
Creating a playback loop
SUBTITLE
Note
Some DVDs do not have menus.
To use a DVD title menu:
1 Press DVD MENU.
2 Use the arrow buttons to select an option,
then press PLAY/ENTER.
Displaying disc information
Note
For discs other than DVDs, this function may work
differently.
To display disc information:
1 Press DISPLAY once to display the Title
Elapsed time.
2 Press DISPLAY again to display the Title
Remaining time.
3 Press DISPLAY again to display the Chapter
Elapsed time.
4 Press DISPLAY again to display the Chapter
Remaining time.
5 Press DISPLAY again to turn off the display.
Using program play
To use program play:
1 Press PROGRAM.
2 Press the number buttons for the program
you want to play.
3 Press the arrow buttons to select START.
4 Press PLAY/ENTER.
14
Note
For discs other than DVDs, this function may work
differently.
www.insignia-products.com
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
Searching for a scene
To search a scene on a DVD:
1 Press SEARCH. The search menu opens.
2 Press the number buttons for the scene you
want.
3 Press PLAY/ENTER.
Playing a DVD in slow motion
To play a DVD in slow motion:
1 Press SLOW one or more times. Each time
you press this button the slow-motion speed
changes.
2 To resume normal playback, press
PLAY/ENTER.
Selecting the audio mode
To select the audio mode:
• Press AUDIO one or more times to select the
audio mode you want.
Note
You must wait three seconds between button
presses.
You can select:
• Audio 1/2: AC3 2 CH English
• Audio 2/2: AC3 5.1 English
• Mono Left
• Mono Right
• Mix-Mono
•Stereo
Using the DVD setup menus
To use the DVD setup menus:
1 Press SETUP. The
menu opens. If you press SETUP again, the
Preference Page
2 Press or to highlight an option, then
press to select the option.
3 Press or to adjust the option, then press
PLAY/ENTER to save your setting.
4 Press SETUP one or more times to exit.
General Setup Page
menu opens.
General Setup Page
Option Description
Tv Display Select the aspect ratio.
When using your LCD TV/DVD combo
to view a DVD, select 4:3/LB.
When using an external TV to view a
DVD, you can select:
4:3/PS–Pan and Scan. Widescreen
images are displayed with the left and
right edges cropped.
4:3/LB–Letter Box. Widescreen images
are display without cropping, but black
bars appear at the top and bottom of
the image.
16:9–Widescreen images fill the
screen. If the DVD was recorded in
ultra widescreen format, black bars
appear at the top and bottom of the
image.
Angle Mark Turns the angle mark on and off. If this
Osd Lang Select the language for the setup
Caption Turns closed captions on or off.
Screen Saver Turns the screen saver option on or
Hdcd Lets you select the CD format. You can
Last Memory Turn the last memory option on and
option is turned on and the DVD you
are watching has scenes with multiple
viewing angles, the angle mark
appears on the screen when multiple
screens are available.
menus.
off. When this option is turned on, your
LCD TV/DVD combo displays an
animated picture whenever the DVD
player is idle for more than three
minutes.
select:
Normal–Plays normal (standard) CDs.
1X–Plays HDCDs in 44.1 K format.
2X–Plays HDCDs in 88.2 K format.
off. If this opition is turned on, your
LCD TV/DVD combo remembers the
DVD chapter you were viewing when
you turn off your LCD TV/DVD combo.
When you turn your LCD TV/DVD
combo back on, it starts playback at
the chapter you were last viewing.
www.insignia-products.com
15
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
Preference Page
Note
The
Preference
in the disc tray.
page only opens when no disc is
Option Description
Parental Turns parental controls on or off and
Password Sets the password. The password
Default Reset all settings (except the password
sets the rating level. The rating level
you select and all higher ratings are
blocked.
You can select:
• 1 Kid Saf
• 2 G
• 3 Pg
• 4 Pg 13
• 5 Pgr
• 6 R
• 7 Nc17
• 8 Adult
When you select the Parental option,
you must enter the password. The
default password is 1234.
must be four digits. The first time you
select this option, press the number
keys to enter 1234, then press the
number keys to enter your new
password twice.
If you forget your password, enter
1369.
and parental rating level) to the factory
defaults. Select this option, then press
PLAY/ENTER.
Maintaining
Cleaning the cabinet
Wipe the front panel and other exterior surfaces
of your LCD TV/DVD combo with a soft cloth
lightly dampened with lukewarm water.
Never use a solvent or alcohol to clean your
LCD TV/DVD combo. Do not spray insecticide
near your LCD TV/DVD combo. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
Handling discs
A dirty, scratched, or warped disc may cause
skipping or noise.
To care for discs:
• Hold discs by their edges.
• Store discs in their cases when you are not
using them.
• Do not expose discs to direct sunlight, high
humidity, high temperature, or dust.
Prolonged exposure to extreme
temperatures can warp discs.
• Do not stick labels or tape on discs.
To clean a disc:
• With a soft cloth, wipe the disc from the
center to the outer edge.
Caution
Do not use detergent or abrasive cleaning agents.
They will damage the disc surface.
Troubleshooting
Symptom Solution
No picture and no sound • Make sure that your LCD
Blank screen • Make sure that you have
No sound • Press MUTE to make sure
Poor sound • Adjust the sound settings.
TV/DVD combo is plugged
into a power outlet.
• Make sure that the power
outlet is supplying power.
selected the correct video
source. Press INPUT to select
the video source.
• If the power has been
interrupted, turn off your LCD
TV/DVD combo, then turn it
on again.
that the sound is not muted.
• Press VOL+ to increase the
volume.
• Change the channel to
determine if the current
channel is having difficulties.
• If you have connected a
sound system, make sure
that it is adjusted correctly.
16
www.insignia-products.com
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
Symptom Solution
No picture on some channels • Make sure that the correct
No color on some channels • Change the channel to
Spots on some channels • Make sure that the antenna is
LCD TV/DVD combo is
functioning abnormally
channel is selected.
• Adjust the antenna.
• Adjust the picture using the
FINE TUNE option.
determine if the current
channel is having difficulties.
• Adjust the color.
connected correctly and
securely.
• Make sure that the antenna
and antenna cabling is in
good condition.
• Adjust the picture using the
FINE TUNE option.
• Turn off your LCD TV/DVD
combo, disconnect the power
cord, wait 10 seconds, then
reconnect the power cord and
turn on your LCD TV/DVD
combo.
• If problems persist, contact
authorized repair personnel.
Specifications
Specifications subject to change without notice.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules.
Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC warning
Changes or modifications not expressly approved by the
party responsible for compliance with the FCC Rules could
void the user’s authority to operate this equipment.
DHHS and FDA safety certification
This product is made and tested to meet safety standards of
the FCC, requirements and compliance with safety
performance of the U.S. Department of Health and Human
Services, and also with FDA Radiation Performance
Standards 21 CFR Subchapter J.
Copyright
© 2007 Insignia. Insignia and the Insignia logo are
trademarks of Best Buy Enterprise Services, Inc. Other
brands and product names are trademarks or registered
trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.
For service and support call (877) 467-4289.
Picture and sound system NTSC, ATSC, Cliar QAM
Audio output
Ports AV input, PC input, S-Video
Power requirements ~120 V 60 Hz
Power consumption
Temperature Operating:
Humidity Operating:
Dimensions
(W×D×H)
Weight 12.79 lbs. (5.8 kg)
Accessories Remote control
≥ 1.5 W + 1.5 W
input, PC audio input, YPbPr
input, HDMI input, antenna
input, headphone output
≤ 80 W
41°F ~ 95°F (5°C ~ 35°C)
Storage:
5°F ~ 113°F (-15°C ~ 45°C)
20% ~ 80%
Storage:
5% ~ 90%
20.55×7.68×16.61 inches
(52.2 × 19.5 × 42.2 cm)
Batteries
User guide
www.insignia-products.com
17
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
18
www.insignia-products.com
Insignia NS-LTDVD19 19" LCD TV/DVD Combo
1 Year Limited Warranty
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new NS-LTDVD19 (“Product”), that the
Product shall be free of defects in the original manufacture of
the material or workmanship for a period of one (1) year from
the date of your purchase of the Product (“Warranty Period”).
This Product must be purchased from an authorized dealer
of Insignia brand products and packaged with this warranty
statement. This warranty does not cover refurbished
Product. If you notify Insignia during the Warranty Period of a
defect covered by this warranty that requires service, terms
of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the
date you purchased the Product. The purchase date is
printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the
Product with new or rebuilt parts; or (2) replace the Product
at no charge with new or rebuilt comparable products or
parts. Products and parts replaced under this warranty
become the property of Insignia and are not returned to you.
If service of Products or parts are required after the Warranty
Period expires, you must pay all labor and parts charges.
This warranty lasts as long as you own your Insignia Product
during the Warranty Period. Warranty coverage terminates if
you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take
your original receipt and the Product to the store you
purchased it from. Make sure that you place the Product in
its original packaging or packaging that provides the same
amount of protection as the original packaging. If you
purchased the Product from an online web site, mail your
original receipt and the Product to the address listed on the
web site. Make sure that you put the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging.
To obtain in-home warranty service for a television with a
screen 25 inches or larger, call 1-888-BESTBUY. Call agents
will diagnose and correct the issue over the phone or will
have an Insignia-approved repair person dispatched to your
home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States and Canada.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
• Accident
•Misuse
• Abuse
• Negligence
• Commercial use
• Modification of any part of the Product, including the
antenna
• Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factory applied serial number has
been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS YOUR EXCLUSIVE REMEDY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES
FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL
APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE
OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insignia-products.com
INSIGNIA™ is a trademark of Best Buy Enterprise Services,
Inc.
Distributed by Best Buy Purchasing, LLC.
Insignia, 7601 Penn Avenue South, Richfield, Minnesota,
U.S.A.
www.insignia-products.com
19
Loading...