Insignia NS-LED4RGB18 Quick Setup Guide

QUICK SETUP GUIDE

LED Tape

LED

light strip

Light controls

Cut line

Light

controls

Wire

USB

connector

USING YOUR TAPE LIGHT

Shortening your tape light

• Use a pair of scissors to cut on a cut line. Cut lines are about 1.3 in. (3.3 cm) apart.

Warning: Do not cut the silver solder markings. Only cut in the

center of the copper-colored pads, as shown.

Cut line

Light

NS-LED4RGB18

PACKAGE CONTENTS

• LED tape light

• Double-sided tape

• Quick Setup Guide

FEATURES

• Premium LEDs produce 20 selectable colors

• Multi-step dimmer adjusts to the brightness level you want

• Self-adhesive backing attaches to TVs, cabinets, or other spaces for quick, custom lighting

• Reduces eye strain from TVs and monitors while enhancing image contrast

• Lights powered through USB (on your TV or computer) or with a USB power adapter (not included)

Before using your new product, please read these instructions to prevent any damage.

Change color

Turn on/o

Adjust brightness

Attaching your lights 1 Peel the adhesive backing o the lights, then adhere the

lights where you want them.

2 Optional: Attach the double-sided tape to the back of the

light control, then adhere it where you want it.

Connecting to power

• Place the tape light where you want it, then connect the USB connector to your TV, computer, or other USB power source.

Adjusting the lights

Note: If you turn o or unplug your tape light, it will remember

your last brightness and color settings.

• Press (power) to turn the tape light on and o.

• Press (COLOR) repeatedly to change the color combination. There are 20 available colors.

• Press (BRIGHT) repeatedly to adjust the brightness. There are eight light levels.

SPECIFICATIONS

• Input: 5V DC, 1A

• USB power supply (not included): 5V DC, 0.5A minimum (1A or more recommended)

• Length: 4 ft. (1.2 m)

TROUBLESHOOTING

LEDs will not turn on.

• Press the power button to make sure your light is turned on, then press (BRIGHT) to increase the brightness.

• Make sure that your lights are connected to a working USB port or power outlet. If connected to a computer, turn on your computer.

LEDs icker or turn on and o.

• Make sure that your lights are plugged into a working power outlet or USB port. Try plugging into a dierent power source.

• Make sure that the cable is not damaged.

SAFETY INFORMATION

• To avoid damage to the light strip, do not sharply twist or bend the light strip 90°.

• Do not cut the silver solder markings. Only cut in the center of the copper-colored pads.

• Do not plug in your lights when they are coiled. This can generate excess heat which can damage the product or connected device.

ONEYEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)

www.insigniaproducts.com

Made in China

V2 ENGLISH 17-0454