Insignia NS-LCD32-09 Service Manual

32LCD TV Best Buy NS-LCD32-09
Service
Service
Service
31~60 kHz
TABLE OF CONTENTS
Description Page Description Page
Table Of Contents.......……..............................…........1
Important Safety Notice.......................................……......2
Revision List…………………………………………………3
1. General Specification..............................………........4
2. Operating Instructions…………………….……….......5
2.1. The Use Of Remote Control…….………….…….......5
2.2. To Use The Menu…...…………………….……….......7
2.3. How To Connect…….…………………….……….....15
2.4. Front Panel Control Knobs……………….……….....18
3. Input/Output Specification…………....................…....19
4. Mechanical Instructions…………………….................21
5. Repair Flow Chart ……………………….…….…….....25
6. PCB Layout ………………..………………....….......30
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVI CE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS
6.1.Main Board…………..……………...……….......30
6.2.Power Board……………..………….……….......32
6.3.Key Board………………………..……….......33
6.4.IR Board…………………………..……….......33
7. White-Balance, Luminance Adjustment...................34
8. Block Diagram.……...........................................36
9. Schematic……………...…………..………………...37
9.1 Main Board…………………………………...….......37
9.2.Power Board…………….…………...………….......52
9.3.Key Board……………….……….………….......53
9.4.IR Board………………………………..……….......54
10. Exploded View………………………………….…...55
11. BOM List……………….…………………………….56
Horizontal Frequency
AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING
1
32LCD TV Best Buy NS-LCD32-09
Important Safety Notice
Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The servi ce procedures recommended by AOC and described in this service manual are effective methods of performin g service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIO NS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected. Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics might create shock, fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC. AOC assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER: DANGER-Invisible laser radiations when open AVOID DIRECT EXPOSURE TO BEAM. CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL. Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment person’s body is ground ed through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may damage the panel.)
2
32LCD TV Best Buy NS-LCD32-09
Revision List
Version Release Date Revision Instructions TPV Model
A00 Jan.-27-2008 Initial Release E328MZNKW1BYNN
3
32LCD TV Best Buy NS-LCD32-09
1. General Specification
Items Specification
Panel Type 32” V315B1-L01 C2 TW panel Driving system TFT-LCD CMO Panel Active Area 697.6845(H) x 392.256(V) Resolutions 1366 x768
LCD Panel
TV Function
Video Inputs
Audio Output Audio Output: L / R
OSD language English, etc Wall Mount VESA 80 mm x 80 mm
Power
Brightness Contrast 800:1 Pixel Pitch 0.51075mm x0.51075mm Display colors 16.7 million Color Temperature Cool / Warm/normal TV Standard ATSC, NTSC Color systems ATSC,NTSC Closed Caption / V-chip For USA AV RCA x 1 Audio L/R x 1 S-Video S-Video x 1 Audio L/R x 1 COMPONENT Y,Cb,Cr x 1 Audio channel L / Rx 1 HDMI 720p,1080i,480p,480i
Power Supply AC100V~240V, 50/60Hz Power Consumption < 180W
500 cd/
Speaker (built-in): Two 10 W speakers Headphone Mini-jack for stereo (3.5ø)
Environment
Operating 5 °C ~ 40 °C Storage 0 °C ~ 50 °C Operating 10% ~ 85%
4
32LCD TV Best Buy NS-LCD32-09
2. Operating Instructions
2.1 The Use of Remote Control
5
32LCD TV Best Buy NS-LCD32-09
6
32LCD TV Best Buy NS-LCD32-09
2.2 To Use the Menus
1 Press the MENU button. 2 Press the or button repeatedly to select a menu item. 3 Press the < or > buttons to enter a sub-menu. 4 Press the ENTER or > button to confirm an adjustment or toggle a setting. 5 Press MENU or EXIT to close the on-screen menu.
MAIN MENU
On-screen menus
On-screen menu Options
Tuning Band–Selects the TV antenna source (Air or Cable). DTV Signal–Displays the digital TV signal strength. For more information.
Setup
Video
(Options may vary in different modes.)
Auto Ch Search–Automatically sets up a list of the channels available in your area. Add On Ch Search–Lets you add new channels without going through the entire list of available channels.
Manual Ch Set–Lets you add or delete channels from the channel list. Channel Labels–Lets you add a label to a channel. For more information. Menu Language–Selects the language for the on-screen menu. You can
select English, French, or Spanish. Aspect Ratio–Selects the screen aspect ratio: Normal, Wide, Zoom, or Cinema. You can also press ZOOM to select the aspect ratio.
Favorite Channel mode–Lets you edit your favorite channel list. Press FAVORITE on the remote to toggle this mode on or off. Contrast–Increases the picture level to adjust the white areas of the picture.
Decreases the picture level to adjust the black areas of the picture. (0 ~ 100) Brightness–Increases the brightness to add more light to dark areas of the picture. Decreases the brightness to add more dark to light areas of the picture. (0 ~ 100) Sharpness–Increases the sharpness for a cleaner and clearer image. Decreases the sharpness for a smoother picture. (-50 ~ 50)
7
32LCD TV Best Buy NS-LCD32-09
Color–Adjusts the overall color of the picture. (0 ~ 100) Tint–Increases the color level to add more green to skin tones. Decreases the
color level to add more purple to skin tones. (R50 ~ G50)
Backlight–Adjusts the backlight level (0 ~ 10). Settings–Restores the video settings to factory default. Audio Language–Selects an alternate language if the program has more
than one language available. Only available in ATSC TV mode.
Bass–Adjusts the low sounds (bass). Treble–Adjusts the high sounds (treble). Balance–Adjusts the right and left speaker volumes.
Audio
(Options may vary in different modes.)
Digital Audio Output–Selects the audio mode for the digital audio optical jack.
• RAW: AC-3 in - AC-3 out/PCM in – PCM out.
• PCM: AC-3 in - PCM out/PCM in – PCM out. TV Speaker–Turns the internal TV speaker On (default) or Off. Does not affect the digital audio output, the headphone output, and the composite audio output.
Feature
Settings–Restores the audio settings to factory default. Time Set–Sets the clock. For more information Sleep Timer–Sets the sleep timer.
Advanced Video Set–
• Noise Reduction–Select from Low, Mid, High, and Off.
• Color Temperature–Select from Normal, Warm, and Cool (default).
• 3D Y/C–Choose from On (default) or Off.
• Dynamic Contrast–Choose from On or Off (default).
• Setting–Restores the settings to factory default. Password Set–Lets you set the password for parental control options. The default password is 0000.
Parental Control–Accesses V-chip controls. Digital Caption–Sets the digital caption type. Choose from Service 1-6, Text
1-4, and CC 1-4. Closed Caption Options–Customizes closed captions for digital broadcasting systems. You can adjust Size, Font, Text Color, Text Opacity, Background Color, Background Opacity, Edge Effect, and Edge Color. Component Set–Only available in component mode. Lets you set Horizontal Position (1 ~ 100), Vertical Position (1 ~ 100), and Phase (1 ~ 100). The Settings option restores the settings to factory default. VGA Set–Only available in VGA mode. Lets you set Horizontal Position (1 ~
100), Vertical Position (1 ~ 100), Clock (1 ~ 100), and Phase (1 ~ 100). You can also select Auto Adjust to automatically adjust the settings. The Settings option restores the settings to factory default. Input Label–Lets you change the input label.
8
32LCD TV Best Buy NS-LCD32-09
USING YOUR TV
To turn your TV on and off:
1 Make sure that the power cord is connected to your TV and a power outlet. 2 Press the POWER button to turn on your TV. The power indicator LED turns blue. 3 Press the POWER button again to return your TV to standby. The power indicator LED turns red.
To select the TV signal source:
• With the TV on, press the INPUT button on either the TV or the remote to choose from:
• TV
• Composite Rear
• Composite Side
• S-Video Rear
• S-Video Side
• Component1
• Component2
• VGA
• HDMI1
• HDMI2
• HDMI3
Press VIDEO to choose between Composite and S-Video. Setting up the channel list: After you select your TV source, if you selected antenna or cable you need to set up the channel list. When you set up your channel list, your TV searches for all available channels in your area and store a list of these channels. When you press the CH or CH v buttons, your TV skips the channels that do not have a signal.
To automatically set up the channel list:
1 Press the MENU button. The Main on-screen display menu opens with Setup highlighted. 2 Press the > button to enter the sub-menu, then or button to highlight Auto Ch Search. 3 Press ENTER or > to start the search.
Manually adding or deleting channels from the channel list
After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list.
To add or delete channels:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted. 2 Press the > button to enter the sub-menu, then or to highlight Manual Channel Set. The Channel Setup
Table opens. 3 Press the ▽or button to select a channel, then press then press ENTER to toggle between viewable and not viewable.
4 Press MENU or
To change channels:
• Press the CH v or CH ^ button on the remote control to go to the next lower or higher channel. Or Press the
EXIT to close the menu.
9
32LCD TV Best Buy NS-LCD32-09
number buttons to directly select a channel (for example, if you want channel 83, press 8, then press 3).Or Press the RECALL button to go to the last viewed channel.
Selecting a digital sub-channel
Most digital TV channels have more than one channel. The main channel carrie s the sig nal for the main TV progra m. The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast. For example, if the main channel number is 8, the sub-channel number might be 8-1, 8-2, or 8-3.
To select a sub-channel:
1 Press the number buttons for the main channel (for example 8). 2 Press the button, and then press the sub-channel button (for example 1).
To adjust the volume:
• Press the VOL – or VOL + button to decrease or increase the volume.
• Press the MUTE button to turn off the sound. Press the MUTE button again to turn the sound back on.
To display status information:
• Press the DISPLAY button. Your TV displays status information, such as the channel number or signal source.
To check the DTV signal strength:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted. 2 Press the > button to enter the sub-menu, then or to highlight DTV Signal. The DTV Signal meter opens.
3 Press MENU or EXIT to close the menu.
To add a label to a channel:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted. 2 Press the > button to enter the sub-menu, then or to highlight Channel Labels. The Channel Label menu
opens. 3 Press the < or > button to move the cursor to the channel field or label field, and then press the ▽or button to select 4 Press < or > to move the cursor to the label field, then press ▽or △to select the character.
5 Press the ENTER key to return to the previous menu.
Freezing the picture
You can freeze (still) the screen image.
To freeze or unfreeze the picture:
• Press the FREEZE button.
10
32LCD TV Best Buy NS-LCD32-09
To set the clock:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted. 2 Press the or button repeatedly to highlight Feature. The Feature menu opens.
3 Press the > button to enter the sub-menu, then or to highlight Time Set. The Time Set menu opens.
4 Press the or button move to the different fields, then press < or >to change the settings. 5 Press MENU or EXIT button to close the menu.
To set the sleep timer:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted. 2 Press the or button repeatedly to highlight Feature. The Feature menu opens.
3 Press the > button to enter the sub-menu, then or to highlight Sleep Timer. 4 Press < or > to select the amount of time (Off, 5 min, 10 min, 15 min, 30 min, 45 min,60 min, 90 min, 120 min,
180 min, 240 min). To turn off the timer, select off.
To view closed captions:
• Press the CCD button repeatedly to select a closed caption option. You can select:
• On
• Off
• On When Mute
Setting parental controls
11
32LCD TV Best Buy NS-LCD32-09
Your TV has a V-chip that lets you control the type of programs your children can watch. Parental controls include two ratings: MPAA (based on age) and TV Parental Guidelines (based on content and age). A TV program may have an MPAA or TV Parental Guidelines rating, so you should set controls for both ratings. Before you can select ratings, you need to set up a parental controls password.
To set up a password:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted. 2 Press the or button repeatedly to highlight Feature. The Feature menu opens.
3 Press the > button to enter the sub-menu, then or to highlight Password Set. 4 Press the number buttons to enter the old password. If you have not set a password, enter 0000. Press ENTER to
continue.
5 Press the number buttons to enter a new password. Press ENTER to continue.
6 Press the number buttons to enter the new password again, to confirm. Press ENTER to continue.
To set the Parental Control level:
1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted. 2 Press the or button repeatedly to highlight Feature. The Feature menu opens.
3 Press the > button to enter the sub-menu, then or to highlight Parental Control. The Password screen
opens.
4 Press the number buttons to enter the password. Press ENTER to continue. The Parental Control Menu opens.
12
32LCD TV Best Buy NS-LCD32-09
5 Press the or button to select USA Parental Locks or Canadian Parental Locks, the press ENTER. The
Controls Menu that you have selected opens.
6 Press < or > , or ▽or to move to a rating, then press ENTER to select the rating. When you block a rating, that rating and all higher ratings are blocked.
7 Press MENU or EXIT button to close the menu. American MPAA ratings
Canadian MPAA Ratings
13
32LCD TV Best Buy NS-LCD32-09
TV Parental Guidelines ratings
Some of the age-based TV Parental Guidelines ratings also have content-based ratings.
14
32LCD TV Best Buy NS-LCD32-09
2.3 How to Connect
Connecting your TV to a power outlet
• Plug the power cord into a power outlet.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and 300 ohm.
• If your antenna cable has a 75 ohm connector, connect the cable to the coaxial jack on the back of your TV.
• If your antenna cable has a 300 ohm connector, connect the cabl e to a 300-75 ohm ada pter (not included), connect the adapter to a 75 ohm cable, then connect the other end of the 75 ohm connector to the coaxial jack on the back of your TV.
To connect cable TV without a converter/descrambler box:
1 Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV. 2 Connect the other end of the cable to the cable TV wall outlet.
To connect cable TV with a converter/descrambler box:
• Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.) Set the RF switch to the A position to watch unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls.
To connect an external signal source:
1 For composite video—plug the audio/video cable into the AUDIO L, AUDIO R (2), and VIDEO (7) in jacks on the back of your TV. - OR –For S-Video—Plug in the audio cables as d escribed abo ve, then plug one e nd of an S-Video (3)cable into the S-Video jack on the back of your TV and the other end into the S-Video jack on external signal source.
- OR - For component video—plug the Y, Pb, and Pr video cables and the Audio L and Audio R cables into the COMPONENT VIDEO IN (6) and AUDIO L/R (5) jacks on the back of your TV, then plug the ot her ends of the cables into the corresponding jacks on the external signal source.
- OR - For HDMI—plug one end of an HDMI cable into the HDMI1 INPUT (1) or HDMI2 INPUT (4) jack on the back of your TV, then plug the other end into an HDMI device. 2 Turn on your TV. 3 Press the INPUT button repeatedly to select the external signal source you want to watch. 4 Turn on external signal source.
15
32LCD TV Best Buy NS-LCD32-09
5 Insert a disc or videotape into the external signal source, then press the PLAY button.
To connect a computer using VGA:
1 Plug a VGA cable from your computer into the VGA jack on the back of your TV. 2 Plug an audio cable from your computer’s audio out jack into the AUDIO jack on the back of your TV. 3 Plug in and turn on your TV. 4 Press the INPUT button repeatedly to select VGA input source.
16
32LCD TV Best Buy NS-LCD32-09
To connect a computer using HDMI:
• Plug an HDMI cable into the HDMI INPUT jack on the back of your TV and into the HDMI Out jack on the back of the computer.
17
32LCD TV Best Buy NS-LCD32-09
2.4 Front Panel Control Knobs
18
32LCD TV Best Buy NS-LCD32-09
3. Input/Output Specification
3.1 RGB Signal input
15 - Pin Color Display Signal Cable
Pin No. Description Pin No. Description
1 Red Video 9 Mandatory +5V Supply for PC Bypass 2 Green Video 10 Sync Ground 3 Blue Video 11 SDA(Remote Control) 4 SCL(Remote Control) 12 Bi-directional Data (SDA) for PC Bypass
1
6
11 15
5
10
5 Ground 13 H-Sync. 6 Red Video Ground 14 V-Sync. 7 Green Video Ground 15 Data Clock (SCL) for PC Bypass 8 Blue Video Ground
3.2 HDMI Digital connector pin assignments
Pin No. Description Pin No. Description
1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2- 4 TMDS Data1+
5 TMDS Data1 Shield 6 TMDS Data1-
7 TMDS Data0+ 8 TMDS Data0 Shield
9 TMDS Data0- 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock­13 CEC 14 NC 15 SCL 16 SDA 17 DDC/CEC Ground 18 +5V Power 19 Hot Plug Detect
19
32LCD TV Best Buy NS-LCD32-09
3.3 AV/S-Video/Component Video Inputs
AV (Composite Video input)
Video1
Amplitude 1.0 V (p-p), negative sync. Impedance 75 ohm terminated
S-Video (Y / C input)
S-Video2
System NTSC Y signal amplitude 1.0Vpp (including sync) C signal amplitude 0.286Vpp Impedance 75 ohm terminated
Component (Y, Pb/Cb, Pr/Cr input)
Video3
Y signal amplitude 1.0Vpp (including sync)
Impedance 75 ohm terminated
3.4 Compatible Mode Table
System NTSC
System 1080i, 480p, 720p, 480i
Cr, (R-Y) / Cb, (B-Y)
Signal amplitude
±0.35Vpp, 75 ohm
VESA MODES
Horizontal Vertical
Nominal
Mode Resolution Total
640x480@60Hz 800 x 525 31.469 N 59.940 N 25.175
VGA
SVGA
XGA
WXGA 1360x768@60Hz 1792x795 47.712 P 60.015 P 85.5
640x480@72Hz 832 x 520 37.861 N 72.809 N 31.500 640x480@75Hz 840 x 500 37.5 N 75 N 31.500 720x400@70Hz 900 x 449 31.469 N 70.087 P 28.322 800x600@56Hz 1024 x 625 35.156 P 56.25 P 36.000 800x600@60Hz 1056 x 628 37.879 P 60.317 P 40.000 800x600@72Hz 1040 x 666 48.097 P 72.188 P 40.000
800x600@75Hz 1056 x 625 46.0875 P 75 P 49.5 1024x768@60Hz 1344x806 48.363 N 60.004 N 65.000 1024x768@70Hz 1328x806 56.476 N 70.069 N 75.000 1024x768@75Hz 1312x800 60.023 P 75.029 P 78.750
Frequency
(KHz)
Sync
Polarity
Nominal
Freq.
(Hz)
Sync
Polarit
y
Nominal
Pixel
Clock
(MHz)
20
32LCD TV Best Buy NS-LCD32-09
4. Mechanical Instructions
1. Remove the 2 screws to remove the stand.
2. Remove 11 screws to remove the rear cover.
3. Remove 4 screws to remove the main frame.
21
32LCD TV Best Buy NS-LCD32-09
4. Release the connectors.
5. Remove the speakers.
6. Remove the main board, power board
22
32LCD TV Best Buy NS-LCD32-09
7. Remove the bkt-PCB-holder.
8. Release the key board and IR board.
9. Remove the BKT-panel-support.
23
32LCD TV Best Buy NS-LCD32-09
10. Remove the bezel.
11. Remove the 6 screws to release the panel.
24
Loading...
+ 53 hidden pages