USER GUIDE
PS4 Universal Vertical
Stand
NS-GPS4UVS18/NS-GPS4UVS18-C
* Console not included.
Before using your new product, please read these instructions to prevent any damage.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up your vertical stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Setting up your PS4 Pro system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Setting up your PS4 Slim system. . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Setting up your PS4 system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
ONE-YEAR LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Congratulations on your purchase of a high-quality Insignia product. Your NS-GPS4UVS18 represents the state of the art in vertical game console stand design and is designed for reliable and trouble-free performance.
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Clean only with damp cloth.
6Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
7Do not put any extreme pressure on this product.
2 |
www.insigniaproducts.com |
PS4 Universal Vertical Stand
•Specifically designed to hold PS4, PS4 Slim, and PS4 Pro game consoles
•Provides a stable platform for your game console
•Equipped with rubber feet to keep your game console from sliding on the desktop (most surfaces)
•Vertical stand
•PS4 Slim adapter
•PS4 Rubber locks (2)
•Mounting screw
PS4 Slim adapter
Vertical stand
Mounting screw
PS4 Rubber locks
www.insigniaproducts.com |
3 |
NS-GPS4UVS18/NS-GPS4UVS18-C
Caution
• Unplug and remove all cables from your game console before mounting it on the vertical stand.
• Perform all work on a flat, firm surface to prevent damage to the vertical stand or your game console.
1Unplug and remove all cables from your game console.
2Remove the mounting screw from the bottom of the vertical stand with your fingertip.
3Using both hands, carefully stand your PS4 Pro game console upside down on a table, with the bottom facing up.
4Place the vertical stand on the bottom of your PS4 Pro so that the holes line up.
Note
The vertical stand has two mounting holes. Use the hole that matches the mark shown in the graphic below.
4 |
www.insigniaproducts.com |